some of our products in this category
incl. VAT + shipping
#606055
Crusader Sword
The blade is 420 stainless steel. In the vagina, a decorative leather winding is attached.
incl. VAT + shipping
#605103




Battle ready sword 85385
The blades are hand-forged from carbon steel (hardness approx <50 HRC), go fully through to the end of the handle and screwed there twice. Continuous blade tang with wooden handle.
Made in India.
incl. VAT + shipping
#604392





Hand and a half sword
handgeschmiedet
The hand forged blade is screwed twice from carbon steel and the handle end. Use of the Battle Ready Weapons solely at your own risk!
Made in India.
europaeische+waffen kreuzritter franken frankenschwerter mittelalter ohneangabe schaukampfschwert schaukampfgeeignet schaukampffähig schaukampf anderthalbschwert anderthalbhänder eineinhalbschwert eineinhalbhänder ritterschwerter ritterschwert xwaffe
Battle ready sword Eineinhalbh ...
by Haller
incl. VAT + shipping
#605423




Battle ready sword Eineinhalbhänder by Haller
stumpf
Made in India. The sword is blunt and can therefore be used for demonstration purposes / show fights. The hand forged blade is riveted to the handle end. Blade length 86 cm, total length 112 cm. The blunt edge of the sword has a thickness of 3 mm. Blade width of about 4.5 cm of the guard, impact edges width 3.5 mm, at the top 2.4 cm, 18.3 cm Parierstangenbreite, from 1060 carbon steel.
europaeische+waffen kreuzritter franken frankenschwerter mittelalter ohneangabe schaukampfschwert schaukampfgeeignet schaukampffähig schaukampf anderthalbschwert anderthalbhänder eineinhalbschwert eineinhalbhänder ritterschwerter ritterschwert xwaffe
incl. VAT + shipping
#603229




Disk pommel sword
geschmiedetes Einhandschwert, schaukampfgeeignet
Inexpensive practice sword. with particularly short and strong guard, which is relatively insensitive to shock. The blade is made of carbon steel
hand forged and bolted twice on the handle end. This sword comes with a scabbard. There is a loop for attachment to belt at the back of the vagina.
Made in India.
Historical Sword Knights Chiva ...
by Jean Fuentes
incl. VAT + shipping
#651099





Historical Sword Knights Chivalry by Jean Fuentes
This sword was created according to historical documents. It is a decoration item, it is not designed for practical use. Information on the scabbard Length: about 66.5 cm
Width: 5 cm
Thickness: 2.5 cm
Sheath is made of plastic and spans with high quality leather, ie. sewn, very beautiful decorative stitching visible tip and opening of the vagina are provided with stainless steel trim
incl. VAT + shipping
#606056
Templar Sword
The blade is 420 stainless steel. In the vagina, a decorative leather winding is attached.
european+weapon crusader frank+swords middle+age medieval 12jhdnchr
Practical Anderthalbhänder
by Urs Velunt
incl. VAT + shipping
#6010079





Practical Anderthalbhänder by Urs Velunt
The blade is forged from steel with a Rockwell hardness of 50-55 °. It has a blade thickness of 2.5 mm and a rounded safety tip and is riveted to the end of the handle.
The handle is made of wood and leather wrapped, end and pommel are made of steel.
Including elimination of wood with metal fittings.
Practical Frankish sword and a ...
by Urs Velunt
incl. VAT + shipping
#6010082
Practical Frankish sword and a Half by Urs Velunt
The blade is forged from spring steel, with a Rockwell hardness of 50-55 °. It has a blunt edge of 2.5 mm and a rounded safety tip and is riveted to the handle end.
The handle is wrapped in wood and leather, Endknauf and guard are made of steel.
Includes wood sheath with metal fittings.
european+weapon crusader frank+swords swords reproduction show+fight middle+age medieval withoutdetails
incl. VAT + shipping
#602689





Sword I
Schwert mit besonders dicker Schneide - schaukampfgeeignet
Inexpensive practice sword with a particularly short and strong guard, which is relatively insensitive to shock. The blade is hand forged from carbon steel and bolted twice on the handle end.
Suitable for exhibition matches. For product liability reasons, we can give no guarantee against breakage. Any use is the risk of the user. (In the Middle Ages there were already blade breaks.)
If you use swords, so we recommend that you test this abundant, eg on a tree trunk. In one stroke cutting on cutting the formation of nicks are completely normal, with a high simple sword of course deeper nicks receives as a high quality sword.
This sword can be used to show fight. Please note that we do not accept liability for personal injury during use. Use at your own risk.
Need that such battle-appropriate weapons meet certain safety criteria is self-evident.
We include:
- Rounded blade tip
- Blunt edge of 2.5 to 3 mm
- Blade thickness at least 5 mm
- Strong guard
- Secure handle
- Secure attachment of the blade at the end of sword
Despite all the precautions in the production and material selection, we can no product liability with respect to blade breakage or the like and its consequences, say after the German and European product liability law.
A wholly owned blade breakage warranty may make no serious manufacturer. Each blade can break under certain circumstances. This clause takes place including why, since there are also users of these swords that deal with these irrational and unobjective swords.
We provide replacement in case of a proven material faults, such as hardness crack, or at too high a blade hardness. We emphasize again: Everything is made with the swords, go at your own risk.
Any costs nicks in the blade are not covered under warranty, but completely normal. Even the loosening of the guard is often unavoidable, especially when she gets shots from the opposing sword. Here, the only one Nachnieten or tightening the screw fixing.
Made in India.
incl. VAT + shipping
#603234




Two-Handed Sword
Geschmiedet, schaukampfgeeignet
Inexpensive practice sword with hand forged blade made of carbon steel. The blade is screwed twice on the handle end.
This sword can be used to show fight. Please note that we do not accept liability for personal injury during use. Use at your own risk.
Need that such battle-appropriate weapons meet certain safety criteria is self-evident.
We include:
- Rounded blade tip
- Blunt edge of 2.5 to 3 mm
- Blade thickness at least 5 mm
- Strong guard
- Secure handle
- Secure attachment of the blade at the end of sword
Despite all the precautions in the production and material selection, we can no product liability with respect to blade breakage or the like and its consequences, say after the German and European product liability law.
A wholly owned blade breakage warranty may make no serious manufacturer. Each blade can break under certain circumstances. This clause takes place including why, since there are also users of these swords that deal with these irrational and unobjective swords.
We provide replacement in case of a proven material faults, such as hardness crack, or at too high a blade hardness. We emphasize again: Everything is made with the swords, go at your own risk.
Any costs nicks in the blade are not covered under warranty, but completely normal. Even the loosening of the guard is often unavoidable, especially when she gets shots from the opposing sword. Here, the only one Nachnieten or tightening the screw fixing.
Made in India.
europaeische+waffen mittelalter 16jhdnchr 15jhdnchr zweihandschwert zweihänder bidenhänder biedenhänder bidenhaender zweihaender kreuzritter franken frankenschwerter mittelalter schaukampfschwert schaukampfgeeignet schaukampffähig ritterschwerter xwa
Battle ready sword with scabba ...
by Haller
incl. VAT + shipping
#605296
Battle ready sword with scabbard by Haller
The hand forged blade is made of carbon steel and bolted twice on the handle end.
Using the sword fight at your own risk!
Made in India.
Battle ready sword in antique ...
by Haller
incl. VAT + shipping
#605420





Battle ready sword in antique finish by Haller
The hand forged blade is riveted carbon steel in antique finish and the handle end. The sword has about 48 Rockwell.
Made in India.
Templer Schwert
by Jean Fuentes
incl. VAT + shipping
#652232
Templer Schwert by Jean Fuentes
- Länge Klinge: 76,5 cm
- Gesamtlänge: 98,5 cm
- Länge Griff: 14,5 cm
- Gewicht Schwert: 846 g
- Gesamtgewicht inkl. Scheide: 1332 g
Klinge ist nicht scharf geschliffen.
Verkauf nur an Personen ab 18 Jahre. Bei Erwerb benötigen wir einen Altersnachweis von Ihnen.