Katana Practical Kin
by Fudoshin

#651303

Katana Practical Kin by Fudoshin

Handgeschmiedet

particularities: hand forged 1095er carbon steel, blade typ Maru, blade hardness: HRC60, blade back:HRC40, blade lengh: 71,5 cm, total lengh 105 cm, weight katana: 1380 g, lacquered wooden Saya, handle is coated with authentic ray skin, handle is traditionally wrapped with cotton and silk thread, blade is razor-sharp, Delivery includes Katana, Saya, cotton sword bag, gloss sword stands, easy cleaning and care kit and woodent box, authenticity certificate, for practical use / cut in training exercise designed

Katana Practical Seigi
by Jean Fuentes

#652048

Katana Practical Seigi by Jean Fuentes

Here you will find the handforged katana Seigi, the blade of the sword was made of differentially tempered 1045 carbon steel. The Hamon of the sword is sharpened. The blade has a blood groove and is sharpened. This katana can be used for cutting exercises.

- Blade: differentially hardened 1045 carbon steel
- Saya: The Saya is made of hard wood with a high gloss finish, the Koiguchi is from bull horn. The sageo is made of black cotton.
- Tsuka: The Tsuba is made of iron. The Nakago is secured by two smoked bamboo Mekugis under control. The handle is covered with imitation ray skin. - Seppa: Iron
- Total length: 104 cm
- Blade Length: 71.75 cm
- Hardness blade: 58 HRC
- Shinogi hardness: HRC 45
- Blade width: 4.5 cm
- Blade thickness: 0.71 cm
- Blade: sharpened
- Hamon ground
- Tsuka Length: 27 cm
- Total weight Katana: 1170g
- Weight without Saya: 190 g
- Seppa Material: Iron
- Ito Material: Cotton
- Can be used for cutting exercises
- Manufacturer: Onikiri

For details on the Tsuka or Menuki are very easy to see the detail photos. Definitions around the noble swords, see About.

Included in delivery: Katana, scabbard (saya), cloth sword bag and handwritten certificate of authenticity.

John Lee III - Dragon Katana
by John Lee

#604653

John Lee III - Dragon Katana by John Lee

This sword comes with a certificate which guarantees the authenticity. It grinded sharp and comes in a fabric cover. The wooden handle is a tra occupied with real fish skin. The wooden scabbard is covered with high-gloss lacquer and made the tsuba ornate bronze. It is delivered in a
fabric-covered wooden box collector. This sword is removable. The Tsuba can replace. The sword is suitable for training. Made of non-folded steel.

Made in China.

John Lee IV - Katana Golden Fl ...
by John Lee

#604700

John Lee IV - Katana Golden Flower by John Lee

Klinge 12-mal gefaltet

This sword is a masterpiece of Asian blacksmithing, hand forged and hardened in the traditional way. Manufactured according to museum originals. The blade is 12-times folded, provided with Bo-Hi and ground out sharply. The wooden handle is traditionally wrapped occupied with applied Menuki and real fish skin. It is supplied in a high quality collector wooden cassette.
Multi-layer steel (folded blade) is also known as Damascus or Damascus blade, although European and Asian production methods differ slightly from one another. The fine pattern of the individual layers of the multi-folded steel give this product its special charm and are at the same time guarantees a long product life and high product quality.
This made according to museum originals masterpiece of Asian art of sword forging has been made in the traditional manner.

Made in China.

Practical katana Yoma
by Fudoshin

#651305

Practical katana Yoma by Fudoshin

Handgeschmiedet

particularities: hand forged 1095er carbon steel, blade typ Maru, blade hardness: HRC60, blade back:HRC40, blade lengh: 72,5 cm, total lengh 104 cm, weight katana: 1500 g, lacquered wooden Saya, handle is coated with authentic ray skin, handle is traditionally wrapped with cotton and silk thread, blade is razor-sharp, Delivery includes Katana, Saya, cotton sword bag, gloss sword stands, easy cleaning and care kit and woodent box, authenticity certificate, for practical use / cut in training exercise designed

Katana Practical Choukin
by Fudoshin

#651036

Katana Practical Choukin by Fudoshin

Handgeschmiedet

hand forged 1045 carbon steel, blade type Maru, blade: HRC60, blade back: HRC40, blade length: 27.16, total length: 49.76, weight Katana: 34.92 oz, weight Saya: 11.29 oz, blade back: 0.28/0.20 oz, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton and silk thread, blade is razor-sharp

asiatische+budowaffen katana shinken nihonto handgeschmiedet maru fudoshin japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito scharf

Katana Practical Taiyo
by ONIKIRI

#651970

Katana Practical Taiyo by ONIKIRI

Hier finden Sie das handgeschmiedete Katana Taiyo, die Klinge des Schwertes wurde aus differenziell gehärtetem 1045 Kohlenstoffstahl hergestellt. Die Hamon des Schwertes ist angeschliffen. Die Klinge hat eine Blutrille und ist scharf geschliffen. Dieses Katana kann für Schnittübungen eingesetzt werden.

- Klinge: differenziell gehärteter 1045 Kohlenstoffstahl
- Saya: Die Saya ist aus Hartholz mit einer Hochglanzlackierung, die Koiguchi ist aus Stier Horn. Die Sageo ist aus schwarzer Baumwolle.
- Tsuka: Die Tsuba ist aus Eisen. Die Nakago wird von zwei geräuchertem Bambus Mekugis im Griff gesichert. Der Griff ist mit Rochenhautimitat belegt. Seppa: Eisen
- Gesamtlänge: 104 cm
- Klinge Länge: 71,75 cm
- Härte Klinge: 58 HRC
- Härte Shinogi: HRC 45
- Klingenbreite: 4,5 cm
- Klingendicke: 0,71 cm
- Klinge: scharf geschliffen
- geschliffene Hamon
- Tsuka Länge: 27 cm
- Gesamtgewicht Katana: 1170 g
- Gewicht ohne Saya: 190 g
- Seppa Material: Eisen
- Ito Material: Baumwolle
- für Schnittübungen einsetzbar
- Hersteller: Onikiri

Einzelheiten zur Tsuka oder Menuki sind sehr gut auf den Detailfotos zu erkennen. Begriffserklärungen rund um die edlen Schwerter finden Sie unter Informationen.

Im Lieferumfang enthalten: Katana, Scheide (Saya), Stoffschwerthülle und handgeschriebenes Echtheitszertifikat.

Katana Bride
by Fudoshin

#651026

Katana Bride by Fudoshin

Faithful replica of the movie Kill Bill Bride Sword - Uma Thurman, Hattori Hanzo.

- The stainless steel blade
- Katana length: 103 cm
- Length blade: 68 cm
- The blade is not sharp
- A serrated edge is applied to the blade
- The Saya is wooden
- Saya is high gloss lacquer
- A sword stand is included

Details are very easy to see on the photos for. Definitions around Swords, Wakizashi and Tanto, see About.

asiatische+budowaffen katana shinken nihonto handgeschmiedet maru fudoshin japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito scharf

Half-Handmade Samurai Sword

#605127

Half-Handmade Samurai Sword

Our blacksmith called this sword as a "Half-Handmade". This means that the forged blade is ground carefully sharp carbon steel on modern machines. The blade surface is polished by hand and has a fine structure. The back of the blade with 7 mm thickness corresponds to old originals. The Rockwell hardness of the blade is about 50 degrees. The sword has a very handy and long handle, which is made of wood, as well as the traditional applied by hand winding. A strong and on both sides elaborately decorated tsuba and scabbard paint from wood (high gloss finishes) complete this sword. The sword is not suitable for cutting tests. The blade is ground, suitable for Kata exercises.

Made in China. Without certificate, made about 5 years ago

John Lee - Shintai KATANA
by John Lee

#605132

John Lee - Shintai KATANA by John Lee

handgeschmiedet und traditionell gehärtet, Klinge 12 mal gefaltet

The blades of the swords are hand forged from carbon steel and hardened in the traditional way. The blade is folded 12 times (yields approximately 8,000 positions) and have a beautiful damascene structure. The sharp ground out blades were provided for weight reduction with a Bo-hi (channel). The handles (tsuka) are made of wood and are equipped with real fish skin (Same) occupied. The handle wrap (Tsuka-Ito) is traditionally mounted from black Baumwole. On handle two Menukis are inserted. The sword fishing are particularly long and held with two bamboo pins (Mekugi) mounted in the handle. The sheath (saya) is made of wood. The blade collar (habaki) are made of brass and were manufactured by museum originals.
Shintai are physical objects which play the role of relics in religious sites. They were not conceived in Japanese mythology as places of residence of the gods (kami). The sword is next to mirror and gem (jap. Throne Insignia) a typical Shintai. On the Tsuba Japanese gods are depicted.
Each sword comes with a seal, which guarantees authenticity. You get every sword in a cloth bag and a high quality collector wooden cassette.
Multi-layer steel (folded blade) is also known as Damascus or Damascus blade, although European and Asian production methods differ slightly from one another. The fine pattern of the individual layers of the multi-folded steel give this product its special charm and are at the same time guarantees a long product life and high product quality.
This made according to museum originals masterpiece of Asian art of sword forging has been made in the traditional manner.

Made in China.

Katana Practical Shirasaya Chi
by Fudoshin

#651053

Katana Practical Shirasaya Chi by Fudoshin

Handgeschmiedet

handmade - folded Damast Blade, blade length: 27.56, total length: 39.97, weight Saya: 14.81 oz, total weight: 31.75 oz, lacquered wooden Saya (scabbard), blade is razor-sharp

Katana practical Yume
by Kagemusha

#651834

Katana practical Yume by Kagemusha

gefalteter Damaststahl

Katana practical Yume

-gefalteter from hand of forged 1060 carbon steel - damask steel
-real Hamon, blood Groove
-Length blade: 72.5 cm
-Total length: 101 cm
-Total weight Katana: 1060 g
-Saya weight: 285 g
-Saya material: Hardwood
-Material of the Sayamotives: genuine mother of Pearl
-Handle length: 28 cm
-Shinogi hardness: HRC 45
-Blade hardness: HRC 56
-Thickness blade: 0.71 cm
-Blade edge: 4.5 cm
-Tsuba material: brass
-traditional winding handle with cotton
-genuine Ray skin
-Fuchigashira material: brass
-Mekugi: smoked bamboo Mekugi easy
-Manufacturer: Kagemusha
-the Katana is sharp and can be used for cutting exercises

Details on the Tsuka or Menuki are easy to recognize in the detail photos. Details are easy to recognize in the detail photos.

Included: Katana, scabbard (Saya), silk cover, sturdy box and certificate of authenticity.

Practical katana Tatsu
by ONIKIRI

#651750

Practical katana Tatsu by ONIKIRI

Here you will find hand-forged katana Tatsu, the blade of the sword was made from differentially hardened 1045 carbon steel. The Hamon of the sword is authentic. The blade has a blood groove and is sharpened. This katana can be used for cutting exercises.

- Blade: differentially gehärteteter 1045 carbon steel
- Saya: The saya is made of hard wood with a high gloss finish, the Koiguchi is from bull horn. The sageo is black cotton.
- Tsuka: The Tsuba is made of iron. The Nakago is secured by two smoked bamboo Mekugis under control. The handle is covered with imitation ray skin. Seppa: Iron
- Total length: 104 cm
- Blade length: 71.75 cm
- Blade hardness: 58 HRC
- Shinogi hardness: HRC 45
- Blade width: 4.5 cm
- Blade thickness: 0.71 cm
- Blade: sharpened
- Real Hamon
- Tsuka Length: 27 cm
- Total weight Katana: 1170 g
- Weight without Saya: 190 g
- Seppa Material: Iron
- Ito Material: Cotton
- Can be used for cutting exercises
- Manufacturer: Onikiri

For details on the Tsuka Menuki or are very easy to see on the photos for. Definitions around the noble swords, see About.

Included: katana, scabbard (saya), cloth sword bag and hand-written certificate of authenticity.

Sales only to persons over 18 years. With this acquisition, we will need proof of age.

Practical katana Ken
by Fudoshin

#651306

Practical katana Ken by Fudoshin

Handgeschmiedet

particularities: hand forged 1095er carbon steel, blade typ Maru, blade hardness: HRC60, blade back:HRC40, blade lengh: 72 cm, total lengh 106 cm, weight katana: 1250 g, lacquered wooden Saya, handle is coated with authentic ray skin, handle is traditionally wrapped with cotton and silk thread, blade is razor-sharp, Delivery includes Katana, Saya, cotton sword bag, gloss sword stands, easy cleaning and care kit and woodent box, authenticity certificate, for practical use / cut in training exercise designed

Katana Practical Zatoichi
by Fudoshin

#651031

Katana Practical Zatoichi by Fudoshin

Handgeschmiedet

hand forged 1045 carbon steel, blade type Maru, blade: HRC60, blade back: HRC40, blade length: 28.34, total length: 41.73, blade back: 2.36/1.97, weight Katana: 27.51 oz, weight Saya: 13.75 oz, matt lacquered wooden Saya (scabbard), blade is razor-sharp

Katana Practical Washi
by Fudoshin

#651045

Katana Practical Washi by Fudoshin

Handgeschmiedet

hand forged 1095 carbon steel, blade type Maru, blade: HRC60, blade back: HRC40, blade length: 28.35, total length: 41.73, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton thread, blade is razor-sharp

asiatische+budowaffen katana shinken nihonto handgeschmiedet maru fudoshin japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito scharf

Katana Practical Nagai
by Fudoshin

#651046

Katana Practical Nagai by Fudoshin

hand forged 1095 carbon steel, blade type Maru, blade: HRC60, blade back: HRC40, blade length: 67,5cm, total length: 99cm, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton thread, blade is razor-sharp

Katana practical Yooki 100_K99 ...
by ONIKIRI

#652177

Katana practical Yooki 100_K9974 by ONIKIRI

Here you will find the hand forged Katana Yooki, the blade of the sword was made of 1045 carbon steel hardened. The Hamon of the sword is sharp. The blade has a blood Groove and is sharp. This Katana can be used for cutting exercises.


-Blade: 1045 carbon steel
-Saya: Is the saya hardwood with a high-gloss finish the Sageo is made of black cotton.
-Tsuka: The Tsuba is made of iron. The Nakago is secured by two Mekugis in the handle. The handle is covered with Stingray skin imitation.
-Total length: 100 cm
-Blade length: 72 cm
-Blade hardness: 58 HRC
-Hardness Shinogi: HRC 45
-Blade width: 4.5 cm
-Blade thickness: 0.71 cm
-Blade: sharp ground
-polished Hamon
-Tsuka length: 27 cm
-Total weight Katana: 1034 g
-Saya weight: 194 g
-Ito material: cotton
-Cutting exercises can be used
-Manufacturer: Onikiri



Details on the Tsuka or Menuki are easy to recognize in the detail photos. Around the noble swords for explanation, see.

Included: Katana, scabbard (Saya), cloth sword sheath and certificate of authenticity.

Practical katana Arashi
by ONIKIRI

#651663

Practical katana Arashi by ONIKIRI

Hardness blade: 58 HRC hardness shinogi: HRC 45 Blade width: 4.5 cm, blade thickness: 0.71 cm, blade: sharpened, Real Hamon, Tsuka Length: 27 cm, total weight Katana: 1170 g Weight without Saya: 190 g, Seppa Material: iron, Ito Material: cotton, used for cutting exercises, Manufacturer: Onikiri

Here you will find hand-forged katana Arashi, the blade of the sword was made from differentially hardened 1045 carbon steel. The Hamon of the sword is authentic. The blade has a blood groove and is sharpened. This katana can be used for cutting exercises.

- Blade: differentially gehärteteter 1045 carbon steel
- Saya: The saya is made of hard wood with a high gloss finish, the Koiguchi is from bull horn. The sageo is black cotton.
- Tsuka: The Tsuba is made of iron. The Nakago is secured by two smoked bamboo Mekugis under control. The handle is covered with imitation ray skin. Seppa: Iron

Included: katana, scabbard (saya), cloth sword bag and hand-written certificate of authenticity.

Practical Katana Gin
by Fudoshin

#651442

Practical Katana Gin by Fudoshin

This katana is hand forged Shirasaya with a blade made of carbon steel and traditional Hamonhärtung. The Saya and the handle are made of black painted wood. The sword is sharp sharpened and designed for practical use in training / exercise section.

* Hand forged 1095 carbon steel
* Blade Type: Maru
* Blade: HRC60
* Back of the blade: HRC40
* Blade length: 73.5 cm
* Overall length: 101 cm
* Katana Weight: 902 g
* Total weight: 1090 g
* Glossy black lacquered wood -Saya
* Glossy black lacquered wooden handle with ornaments
* The sword is sharpened

Definitions around the noble swords, see About.

Included: katana, scabbard (saya), Katana fabric shell, sturdy packaging and certificate of authenticity.

Practical katana Hikari
by Fudoshin

#651443

Practical katana Hikari by Fudoshin

This beautiful katana is hand forged with a blade made of carbon steel and traditional Hamonhärtung. The saya is made of white painted wood. The handle was covered with authentic ray skin and provided with white, traditionally mounted handle wrap. The sword is sharp sharpened and designed for practical use in training / exercise section.

* Hand forged 1095 carbon steel
* Blade Type: Maru
* Blade: HRC60
* Back of the blade: HRC40
* Length of the blade: 73 cm
* Overall length: 101 cm
* Katana Weight: 966 g
* Total weight: 1176 g
* Glossy white lacquered wooden Saya
* White handle wrap
Assigned * handle with real ray skin
* The sword is sharpened

Included: katana, scabbard (saya), sword bag made of fabric, sturdy packaging and certificate of authenticity. Blade with serrated edge.

Katana Super Bitch K9971 in bl ...
by ONIKIRI

#651836

Katana Super Bitch K9971 in black by ONIKIRI

Katana Super Bitch - the modern version of a traditional Katana and a great gift idea.

- Hand forged 1045 carbon steel
- Blade Type Maru
- Length of the blade: 73 cm
- Total length: 103 cm
- Total weight Katana: 1050 g
- Saya weight: 204 g
- Lacquered wooden Saya
- Handle is coated with authentic ray skin
- Organic wrapping of cotton and silk is traditionally attached
- The sword is sharpened
- The tang is 2 Mekugi held and secured in the handle
- Manufacturer: Onikri

For details on the Tsuka Menuki or are very easy to see on the photos for. Definitions around the noble swords, see About.

Included: katana, scabbard (saya), sword cloth bag and certificate of authenticity.

Katana Ashai
by ONIKIRI

#651837

Katana Ashai by ONIKIRI

Katana Ashai

- Hand forged 1045 carbon steel
- Blade Type Maru
- Length of the blade: 71 cm
- Total length: 101 cm
- Total weight Katana: 1170 g
- Saya weight: 280 g
- Lacquered wooden Saya
- Handle is coated with authentic ray skin
- Organic wrapping of cotton and silk is traditionally attached
- The sword is sharpened
- The tang is 2 Mekugi held and secured in the handle
- Manufacturer: Onikri

For details on the Tsuka Menuki or are very easy to see on the photos for. Definitions around the noble swords, see About.

Included: katana, scabbard (saya), sword cloth bag and certificate of authenticity.

asiatische+budowaffen katana shinken nihonto handgeschmiedet maru fudoshin japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito scharf

Single blade with scabbard Joh ...
by John Lee

#605452

Single blade with scabbard John Lee by John Lee

Single blade with matching scabbard of pale untreated unpainted wood suitable for John Lee swords. Vaginal length about 74 cm.

Made in China.

Katana Shirasaya Beri
by ONIKIRI

#651805

Katana Shirasaya Beri by ONIKIRI

Zatoichi Katana Beri

- Hand forged 1045 carbon steel
- Blade Type Maru
- Blade: HRC60
- Back of the blade: HRC40
- Length of the blade: 73 cm
- Total length: 100.5 cm
- Katana Weight: 872 g
- Saya weight: 202 g
- Lacquered wooden Saya
- The sword is sharpened
- Manufacturer: Onikri
For details on the Tsuka Menuki or are very easy to see on the photos for. Definitions around the noble swords, see About.

Included: katana, scabbard (saya), sword bag and certificate of authenticity.

Sales only to persons over 18 years. With this acquisition, we will need proof of age.

Goemon Practical Katana
by John Lee

#6010108

Goemon Practical Katana by John Lee

Ishikawa Goemon (* 16th century - + August 10, 1594) is a Japanese folk hero. Much like Robin Hood, he is said to have robbed the rich and given to the poor.

Even today there are many myths and legends about him, such as the failed assassination attempt on Toyotomi Hideyoshi, after which he was sentenced with other members, and executed them alive in boiling oil.

Heroic he should have while still trying to save his son by keeping him out of the boiler.

The John Lee Goemon Katana addresses this issue. The tsuba shows, among other Goemon when he was executed by a wood engraving by Toyokuni Ichiyoai. Among other designs also his name is found on the Fuchi in Japanese characters.

- Sharp blade of 9260 carbon spring steel (not stainless), suitable for cutting tests
- Sword in Unokubi-zukuri style
- Hand-painted Tsuba with traditional woodcut art
- Grip winding brown suede, lined with blackened Roche skin
- Black, high-gloss lacquered scabbard with degrees from buffalo horn
- High-quality, two-colored sageo
- Supplied with protective cover in fabric and in an attractive collector's box

47 Ronin Katana
by John Lee

#6010303

47 Ronin Katana by John Lee

Product features include:

- Sharp, hand forged blade of 9260 carbon spring steel (not stainless), suitable for cutting tests (about 55 HRC).
- Blade in the Shobu-zukuri style.
- Handle of wood, with authentic ray skin inlay.
- Grip winding black leather classic Hineri Maki style.
- Black, high gloss lacquered wooden scabbard (Kuroro style) with degrees from (Kojiri, kurigata, Koiguchi) from buffalo horn.
- High-quality, two-colored sageo.
- Supplied in an attractive collector's box.
- Manufactured according to historical models.

Beginning of the 18th century were the two princes Kamei Korechika and Asano Naganori from Shogun commissioned to prepare a reception ceremony for the envoys of the emperor.

Dependence were the two on the corrupt ceremony champion Kira Kozuke who should teach in terms of courtly etiquette. This expected however this generous gifts and offerings. Unlike Kamei Asano refused this, whereupon he was from the ceremony master particularly ill-informed, insulted and provoked.

After some time of Erduldens Asano finally burst the collar and he attacked Kira with his knife. Although he was injured this only slightly, stood on this offense the death penalty and Asano committed seppuku, the ritual suicide.

Under Asano's followers there were 47 Samurai, which were by the death Ronin (masterless samurai). Although they knew that the blood revenge would mean the own death, she devised a plan to the ceremony master to murder. After months of preparation did you manage to finally break into Kira's property to execute him and then remove him on the head.

After they had laid his head down on Asano's grave, the Ronin revealed. Since they had avenged their master and thus acted within the code of honor of the samurai, the shogun allowed to commit suicide by seppuku, which they were not executed as ordinary criminals. This event is an outstanding example of the unconditional loyalty and fidelity of the samurai against their Lord.

The John Lee 47 Ronin Katana is designed to reflect the strength and loyalty of the masterless samurai.

asiatische+budowaffen katana shinken nihonto handgeschmiedet japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito iaido scharf john lee xwaffen scharfe schwerter damaststahl damaszener

John Lee Waqar Katana
by John Lee

#6010316

John Lee Waqar Katana by John Lee

Know the colours of Captain John Lee Gunto on.

• Sharp, hand forged blade from 1045 carbon steel (not stainless)
• The Shinogi-Zukuri style blade
• Traditional handle is made of wood with real ray skin layer and lock button
• Handle wrap Brown cotton Hineri Maki style
• Brown lacquered wooden scabbard
• High-quality, two-coloured Sageo
• Is delivered in an attractive collector's box
• Made after historical models
• Each original John Lee loves a seal as well as a certificate in

Waqar is the Japanese military sword. At the end of the 19th century was the design of the French military Sabre.

To bring the spirit of the Samurai code of honor (Bushido) forces, it was decided in 1934 to a, the Katana inspired look. The swords of the ordinary soldiers were usually industrially manufactured and therefore simple quality.

However, senior military swords were often equipped with traditional blades from the family heritage. The rank of an officer was seen in the colors of the Sageos. In contrast to the Katana, the Sageo was mounted at the handle end of the Waqar.

John Lee II - Katana Mount Fuj ...
by John Lee

#604644

John Lee II - Katana Mount Fuji by John Lee

Klinge 12-mal gefaltet

This sword comes with a certificate which guarantees the authenticity. It grinded sharp and comes in a coated fabric collector wooden box in which it can be kept surrounded by a fabric cover securely. The wooden handle is traditionally topped with real fish skin. The wooden scabbard is covered with high-gloss lacquer, the tsuba is made of brass and shows pictures of swordsmen and Chubu.
At the cutting edge, the sword has a hardness of 60 HRC and the back of the blade about 45 to 50 HRC. 2 Mekugi. Handle wrapped with cotton tape.
Multi-layer steel (folded blade) is also known as Damascus or Damascus blade, although European and Asian production methods differ slightly from one another. The fine pattern of the individual layers of the multi-folded steel give this product its special charm and are at the same time guarantees a long product life and high product quality.
This made according to museum originals masterpiece of Asian art of sword forging has been made in the traditional manner.

Made in China.

John Lee I - Katana Musashi I ...
by John Lee

#604645

John Lee I - Katana Musashi Ichi by John Lee

The sword includes a certificate proofing the authenticity. It is sharpend and delivered in a decorative wooden, fabric covered collectors box where it may be stored in the included fabric wrapper. The handle (tsuka) is made of wood and covered in real fish skin (same). The saya is made of wood and covered with mirrorfinish lacquer.

The tsuba is made of casted iron in the traditional double ring form which is said to route back to Miyamoto Musashi. Museum originals had been the source for this masterpiece of asian swordcraft.

The hardness is approx. 50 to 52 degrees rockwell. Since the cutting edge thinner, it cools down faster then the thicker sword back so it will be harder. The softer, less hardened sword back guarantees the necessary flexibility of the blade. The blade has a brass collar (habaki) so it won't rattle in the scabbard.

John Lee - NOH KATANA
by John Lee

#605128

John Lee - NOH KATANA by John Lee

handgeschmiedet und traditionell gehärtet

1045 carbon steel 47-48 ° Rockwell. Masterpieces of Asian blacksmithing.
The blades of the swords are hand forged from carbon steel and hardened in the traditional way, with fine harmony line. The sharp ground out blades were provided for weight reduction with a Bo-hi (channel). The handles (tsuka) are made of wood and are equipped with real fish skin (Same) occupied. The handle wrap (Tsuka-Ito) is traditionally mounted from red Baumwole. On handle two Menukis are inserted. The sword fishing are particularly long and held with two bamboo pins (Mekugi) mounted in the handle. The sheath (saya) is made of wood. The blade collar (habaki) are made of brass and were manufactured by museum originals.
The tsuba shows actor of traditional Japanese Noh Theater, which although already emerged in the 13th century, is still very popular today. A Katana with a beautiful red glossy lacquer scabbard and red handle development.
Each sword comes with a seal, which guarantees authenticity. You get every sword in a cloth bag and a high quality collector wooden cassette. This made according to museum originals masterpiece of Asian art of sword forging has been made in the traditional manner.
The blade is folded.

Made in China.

John Lee - The Last Samurai KA ...
by John Lee

#605133

John Lee - The Last Samurai KATANA by John Lee

handgeschmiedet und traditionell gehärtet

The blades of the swords are hand forged from carbon steel and hardened in traditional style with fine harmony line. The sharp ground out blades were provided for weight reduction with a Bo-hi (channel).

The handles (tsuka) are made of wood and are equipped with real fish skin (Same) occupied. The Tsuba is made Eisen.Die handle wrap (Tsuka-Ito) is traditionally mounted from black Baumwole. On handle two Menukis are inserted.

The sword fishing are particularly long and held with two bamboo pins (Mekugi) mounted in the handle.

The sheath (saya) is made of wood. The blade collar (habaki) are made of brass and were manufactured according to historical documents. The blade is consistently incorporated to the handle end.

Known from the movie "The Last Samurai". Saigo Takamori with, the last samurai, 1877 ended a long tradition. He would not come to terms with the new political situation, the abolition of the samurai and instigated a last stand against the new government. His samurai warriors had but gege the military, which was already equipped with modern firearms, no chance.

Each sword comes with a seal, which guarantees authenticity. You get every sword in a cloth bag and a high quality collector wooden cassette. For each sword has a care kit and a knocked with felt high gloss lacquer stand.
This made according to museum originals masterpiece of Asian art of sword forging has been made in the traditional manner. Sheath extends to the handle end.

Made in China.

Imori Katana
by John Lee

#605305

Imori Katana by John Lee

The sharply-carved blade of the sword is hand-forged carbon steel (not stainless) and hardened. It was made after Museum templates.
Fittings (Tsuba, Menuki, Fuchi, Kashira) show a golden pig.
The handle (Tsuka) is made of wood and is topped with real fish skin (same),
the tight handle wrap dark blue cotton, is traditionally the Katate Maki - style (war winding) attached
The blade clamp (Habaki) made of brass. With this sword, the sword fishing is particularly long and
fixed with 2 bamboo rods (Mekugi) in the handle.
Scabbard is made of wood.

It will guarantee that delivered, with Zertiftikat and seal for the authenticity. The delivery includes a collector wooden box.

Dimensions and weights:

Tsuba (Nagasa) blade length: 71 cm
Total length: 100 cm
Total length with sheath: 103 cm
Handle length: 28.5 cm
Curvature (sori): 1,4 cm
Focus: approx. 13 cm above the Tsuba
Habaki blade width: 3.0 cm
Blade width at transition to the tip (Kisaki): 2,0 cm
Blade thickness: 0,70 cm
Scabbard weight: 1520 g
Weight without scabbard: 1290 g, cutting test possible, good workmanship, Rockwell hardness in the core 40, at the cutting edge of 54, from 1095 carbon steel

Made in China.

Katsumoto Katana
by John Lee

#605306

Katsumoto Katana by John Lee

Gerfertigt after Museum templates.

The sharply-carved blade of the sword (not stainless) is hand forged from 1095 carbon steel and was provided with a chamfer (Bo-Hi) to reduce weight

Traditional, sophisticated hardening of the blade with clay be stroke, creating a real, beautiful Hamon line. It is for cutting test suitable, by 60° Rockwell at the cutting edge, 40° on the back of the blade.

Blade in the Hon Sanmei built cross section (see figure)

Tsuba iron shows a Samurai handle (Tsuka) made of wood, coated with real, blackened fish skin (same), grip tight, winding made of black cotton, traditionally placed in the Katate Maki - style (war winding).

Blade clamp (Habaki) made of brass, sword fishing especially for holding and fixed with 2 bamboo rods (Mekugi) in the handle.

Scabbard made of wood, decorated with high-quality Sageo (winding). The sword is supplied with certificate which guarantees the authenticity. The delivery takes place in a wooden collector's box with a rack.

Dimensions and Gewichtsangeaben:

Blade length-Tsuba (Nagasa): 77.0 cm
Overall length: 109.5 cm
Total length with sheath: 113.0 cm
Handle length: 32.0 cm
Curvature (sori): 2.7 cm
Focus: approx. 13 cm above the Tsuba
Habaki blade width: 3.0 cm
Blade width at transition to the tip (Kisaki): 2,0 cm
Blade thickness: 0.75 cm
Scabbard weight: 1550 g
Weight without scabbard: 1220 g

Made in China.

asiatische+budowaffen katana shinken nihonto handgeschmiedet japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito iaido scharf john lee xwaffen scharfe schwerter damaststahl damaszener

Ten Kei Katana
by John Lee

#605307

Ten Kei Katana by John Lee

-The sharply-carved blade of the sword (not stainless) is hand forged from 1095 carbon steel and was provided with a chamfer (Bo-Hi) to reduce weight
-Traditional, sophisticated hardening the blade with clay be stroke, creating a real, beautiful Hamon line
-Cut test suitable for - 60° Rockwell on the vagina, 40° on the back of the blade
-Rebuilt blade Kobus section (see figure)
-Fine, edited by hand fittings (Tsuba, Fuchi, Kashira, Menuki) which were plated with gold and silver
-Handle (Tsuka) made of wood, covered with real, fish skin (same)
-Tight handle wrap in green silk, traditionally in the Katate Maki - style (war winding) attached
-Blade clamp (Habaki) made of brass
-Sword Angel long held and fixed with 2 bamboo rods (Mekugi) in the handle
-Sheath made of wood, decorated with high-quality Sageo (winding)
-With certificate, which guarantees the authenticity
-Manufactured according to Museum template
-Delivery in wooden collectors box incl. stand

Dimensions and weights:

Tsuba (Nagasa) blade length: 71 cm
Total length: 100 cm
Total length with sheath: 104 cm
Handle length: 29 cm
Curvature (sori): 2 cm
Focus: approx. 11 cm above the Tsuba
Habaki blade width: 3.5 cm
Blade width at transition to the tip (Kisaki): 2.5 cm
Blade thickness: 0.75 cm
Scabbard weight: 1310 g
Weight without scabbard: 1045 g

Made in China.

Yushu-Katana
by Citadel

#605711

Yushu-Katana by Citadel

Weight (without scabbard) 1050 g. Good swords there are many, perfection, however rare. Samurai swords made by Citadel among the best available to buy -next a real Nihonto- on the market. Perfection without "if" and "but" down to the smallest detail. Each sword is completely made by hand.
Each participating artisans is a master of his craft. The production of such a work of art takes up to three months and makes each piece unique.
Many samurai swords from mass production, only one strip Same (ray skin) is often glued to each page. In the Citadel complete handle is surrounded by the highest quality ray skin. The winding handle (Ito), made from the finest Japanese silk, is tight in Katate Maki - style attached. The strands of the nodes intersect it mutually. Underlaid is the winding (Tsuka Maki) of traditional, folded paper triangles, called Hishigami. The flat-shaped handle (Tsuka) was adjusted 100% to the Angel. A bamboo pen (Mekugi) holds handle and Angel together. As with the historical originals this is conical.
Butt end (Kashira) and grip ferrule (fuchi) are made of iron, covered with simple, but elegant, high-gloss black lacquer. Also iron is the tsuba, which was not cast, but made by hand. It shows a Japanese temple with Cherry blossom (Sakura no Hana) in the foreground. Ornamental rate (Menuki) with silver plated bronze offer a nice contrast to the dark winding handle (Tsuka-Maki) and underline the graceful picture.
Both the handle (Tsuka), as well as the vagina (Saya) Jakwood dried was used. In addition to the excellent strength properties, it is also because of its low acid fraction as starting material because it does not damage the blade. Was painted the vagina in glossy black, the so-called Kuroro style. Vaginal opening (Koiguchi), eye (kurigata) and vaginal degree (Kojiri) are made of water buffalo horn and were adapted in most elaborate handwork. The front part of the sheath (saya) is also surrounded by Roche skin. This was sanded and painted over later. The result is a smooth surface with a unique look. The scabbard (saya) is made individually for each blade individually and ensures absolute fit. With light pressure allows the blade detached from the vagina, but it certainly holds otherwise.
The blade is made of steel mono (1075er carbon steel, not stainless), but hardened differentiated. Under traditional Lehmbestrich this was differentiated to 60 HRC on the edge and about 40 HRC hardened at the back of the blade. Directly onto the blade, the blade collar (habaki) was forged silver-plated copper. Only in this way is possible the fuller play to the Tsuba and to guarantee a perfect fit. Through the skills of the polisher the masterful work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result.
As each sword is unique, dimensions and weight may vary. Delivery without sword stand

is mono steel (1075er carbon), but hardened differentiated:
Citadel Katana Yushu
The name Yushu (dt. "Perfection") carries this sword to right. The many intricate details make it a work of art of the highest class.
Butt end (Kashira) and grip ferrule (fuchi) are made of iron, covered with simple, but elegant, high-gloss black lacquer. Also iron is the tsuba, which is not cast, but made by hand. It shows a Japanese temple with Cherry blossom (Sakura no Hana) in the foreground. Ornamental rate (Menuki) with silver plated bronze offer a nice contrast to the dark winding handle (Tsuka-Maki) and underline the graceful picture.
- Sword in shinogi-zukuri style with groove (Bo-Hi).
- Situated Schmiedetes, the groove adapted Habaki silver-plated, engraved copper.
- Seppa silver-plated brass.
- Handle of black Japanese silk winding in Katate Maki style (war winding).
- Black, high-gloss lacquered scabbard with built-in ray skin (Same Kuroro style).
The razor sharp blades are made of 1075 carbon steel. Under traditional Lehmbestrich these are differentiated to approximately 60 HRC at the cutting edge and approximately 40 HRC hardened at the back of the blade. Through the skills of the polisher the masterful work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result.
For each sword belongs next to a production certificate, a quality sword bag and a padded Cordura bag for transport.
Handle length 28.5 cm
Blade length 74 cm
Total length (without scabbard) 102.5 cm
Weight (without scabbard) 1050 g

Made in Cambodia.

Bamboo-Katana
by Citadel

#605712

Bamboo-Katana by Citadel

.

asiatische+budowaffen katana shinken nihonto handgeschmiedet japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito scharf

Ronin-Katana
by Citadel

#605713

Ronin-Katana by Citadel

Good swords there are many, perfection, however rare. Samurai swords made by Citadel among the best available to buy -next a real Nihonto- on the market. Perfection without "if" and "but" down to the smallest detail. Each sword is completely made by hand. Each participating artisans is a master of his craft. The production of such a work of art takes up to three months and makes each piece unique.

Many samurai swords from mass production, only one strip Same (ray skin) is often glued to each page. In the Citadel complete handle is surrounded by the highest quality ray skin. The winding handle (Ito), made from the finest Japanese silk, is tight in Hineri Maki - fitted style. The strands of the nodes intersect it mutually. Underlaid is the winding (Tsuka Maki) of traditional, folded paper triangles, called Hishigami. The flat-shaped handle (Tsuka) was adjusted 100% to the Angel. A bamboo pen (Mekugi) holds handle and Angel together. As with the historical originals this is conical.

Butt end (Kashira) and grip ferrule (fuchi) are made of iron, covered with simple, but elegant, high-gloss black lacquer. Also iron is the tsuba, which was not cast but made by hand. Ornamental rate (Menuki) with silver plated bronze offer a nice contrast to the dark winding handle (Tsuka-Maki) and underline the graceful picture.

Both the handle (Tsuka), as well as the vagina (Saya) Jakwood dried was used.

In addition to the excellent strength properties, it is also because of its low acid fraction, since it does not damage the blade. Was painted the vagina in matte black, in so
mentioned Ishime style. Vaginal opening (Koiguchi), eye (kurigata) and vaginal degree (Kojiri) are made of water buffalo horn and were adapted in most elaborate handwork. The scabbard (saya) is made individually for each blade individually and ensures absolute fit. With light pressure allows the blade detached from the vagina, but it certainly holds otherwise.

The blade is made of 1075 carbon steel (not stainless). Under traditional Lehmbestrich this was differentiated to 60 HRC on the edge and about 40 HRC hardened at the back of the blade. Directly onto the blade, the blade collar (habaki) was forged. Only then is it possible to guarantee a perfect fit. Through the skills of the polisher the masterful work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result.

As each sword is unique, dimensions and weight may vary. Delivery without sword stand.

Made in Cambodia.

John Lee - Golden Autumn
by John Lee

#605724

John Lee - Golden Autumn by John Lee

Hand forged, hot ausgeschliffene, 12x folded blade of 1095 carbon steel
- Blade assembly in Kobuse style * (Hard sheath steel, soft core)
- Differentiated cured with Lehmbestrich to 60HRC and 40HRC at the edge at the back of the blade
- Ornamental rate (Tsuba, Menuki, Fuchi and Kashira) are handmade and represent an autumn motif
- Grip winding is made of black silk, lined with traditional triangles of paper
(Hishigami), as well as authentic ray skin
- Two conical Mekugi (bamboo pins) connect the long-held tang to the handle
- Black, high-gloss lacquered wood scabbard with integral Roche skin inlay
- The financial statements of the vagina (Koiguchi, kurigata, Kojiri)
are made of genuine buffalo horn
- Supplied in a wooden box with cloth bag, seal and certificate
- Manufactured according to museum originals

Made in China.

John Lee - Kamakura Tachi
by John Lee

#605725

John Lee - Kamakura Tachi by John Lee

1045 47 - 48 ° Rockwell. - Hand-forged, sharp ausgeschliffene blade made of hardened carbon steel
- Long-held tang, which with two bamboo pins (Mekugi) is fixed in the handle
- Fine and simply decorated ornamental rate (Tsuba, Fuchi, Kashira, Menkui) from zinc-aluminum
- Handle is traditionally wrapped with black silk, lined with authentic ray skin
- Highly detailed sword belt leather inserts and high-quality, two-tone cotton sageo
- Delivery in collector, with cloth bag
Seal and Certificate
- Manufactured according to museum originals

Made in China.

asiatische+budowaffen tachi japanische+schwerter schwert samurai samuraischwert samuraischwerter katana shinken nihonto xwaffen handgeschmiedet iaido iai+do iaito iaido scharf john lee scharfe schwerter damaststahl damaszener

John Lee Kappa Katana
by John Lee

#606110

John Lee Kappa Katana by John Lee

As Kappa (to German "river child") refers to a mythical creature of Japanese mythology. It is a water goblin, the people who come too close to its waters, tearing into the depths and drowned. But according to legend, they should have a weakness for pickles.

On its hand crafted decorative rates this extraordinary Katana shows a Kappa, and one unsuspecting hikers. Of particular note is next to the beautiful colors and the flute, which begins only about 10 cm above the tsuba.

- Sharp ausgeschliffene Damascus from 12 times folded 1045 carbon steel with more than 8,000 locations
- Sword in shinogi-zukuri style with stepped groove (Bo-Hi)
- Grip winding of red cotton classic Hineri Maki style
- Black, high-gloss lacquered scabbard (Kuroro-style) of wood
- With a long tang which with two bamboo pins (Mekugi) is fixed in the handle, the sword is thus fully separable
- No plastic, it only high-quality, authentic materials are used
- Blade collar (habaki) and washers (Seppa) are made of brass
- The traditional winding handle is highlighted with authentic ray skin
- All trim rate (Tsuba, Fuchi, Menuki, Kashira) are handmade from metal
- Supplied with protective cover made of fabric
- Each original John Lee sword is a seal and a certificate in

Katana Practical Demon
by Fudoshin

#651027

Katana Practical Demon by Fudoshin

Handgeschmiedet

hand forged 1095 carbon steel, blade engraving, blade type Maru, blade: HRC60, blade back: HRC40, blade length: 27.55, total length: 39.76, weight Katana: 42.33 oz, weight Saya: 3.53 oz, lacquered adorned wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with leather, blade is razor-sharp

Katana Practical Marui
by Fudoshin

#651028

Katana Practical Marui by Fudoshin

Handgeschmiedet

hand forged 1095 carbon steel, blade type Maru, blade: HRC60, blade back: HRC40, blade length: 26.38, total length: 39.37, blade back: 2.95/2.17, weight Katana: 39.86 oz, weight Saya: 8.46 oz, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton and silk thread, blade is razor-sharp, includes timber box, includes two Tsubas

Katana Practical Zatoichi Red
by Fudoshin

#651032

Katana Practical Zatoichi Red by Fudoshin

Handgeschmiedet

hand forged 1045 carbon steel, blade type Maru, blade: HRC60, blade back: HRC40, blade length: 28.35, total length: 41.73, blade back: 2.28/1.42, weight Katana: 21.26 oz, weight Saya: 7.05 oz, lacquered wooden Saya (scabbard), blade is razor-sharp

Katana Practical Zombi
by Biohazard

#651037

Katana Practical Zombi by Biohazard

Handgeschmiedet

hand forged 1045 carbon steel, blade type Maru, blade: HRC60, blade back: HRC40, blade length: 26.77, total length: 39.17, blade back: 2.87/1.77, weight Katana: 36.33 oz, weight Saya: 7.41 oz, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton and silk thread, blade is razor-sharp, suitable Wakizashi: K12

Katana und Wakizashi Practical ...
by Fudoshin

#651043

Katana und Wakizashi Practical Koroki by Fudoshin

Handgeschmiedet

hand forged 1095 carbon steel, blade type Maru, blades: HRC60, blades back: HRC40, blade length Wakizashi:, total length Wakizashi: blade length Katana: 26.77, total length Katana: 40.95, total weight Katana: 42.33 oz, weight Saya: 3.53 oz, total weight Wakizashi: 35.28 oz, lacquered wooden Sayas (scabbard), handles are coated with authentic ray skin, handles are traditionally wrapped with cotton thread, blades are razor-sharp

Katana Practical Maho
by Fudoshin

#651044

Katana Practical Maho by Fudoshin

Handgeschmiedet

hand forged 1095 carbon steel, blade type Maru, blade: HRC60, blade back: HRC40, blade length: 28.35, total length: 41.73, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton thread, blade is razor-sharp

asiatische+budowaffen katana shinken nihonto handgeschmiedet maru fudoshin japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito scharf

Katana Practical Aka
by Fudoshin

#651050

Katana Practical Aka by Fudoshin

12-Fach-Faltung Handgeschmiedet

handmade - folded Damast Blade, blade length: 28.93, total length: 40.55, weight Katana: 34.92 oz, weight Saya: 8.47 oz, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton thread, blade is razor-sharp

Katana Practical Rikou
by Fudoshin

#651051

Katana Practical Rikou by Fudoshin

12-Fach-Faltung Handgeschmiedet

handmade - folded Damast Blade, blade length: 28.93, total length: 40.55, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton thread, blade is razor-sharp

Katana Practical Shirasaya Kei ...
by Fudoshin

#651052

Katana Practical Shirasaya Keii by Fudoshin

Handgeschmiedet

handmade - 12 folded Damast Blade, blade length: 27.56, total length: 39.97, weight Saya: 14.81 oz, total weight: 31.75 oz, lacquered wooden Saya (scabbard), blade is razor-sharp

Practical katana Negisa
by Fudoshin

#651258

Practical katana Negisa by Fudoshin

Handgeschmiedet

- Hand forged 1045 carbon steel
- Blade Type Maru
- Blade: HRC60
- Back of the blade: HRC40
- Length of the blade: 71 cm
- Total length: 106 cm
- Total weight Katana: 1050 g
- Saya weight: 200 g
- Lacquered wooden Saya
(Natural wood color)
- Handle is coated with authentic ray skin and about 29.0 cm long
- Organic wrapping of cotton is traditionally attached
- The sword is sharpened.

For details on the Tsuka Menuki or are very easy to see on the photos for.

- Designed for practical use in training / exercise section

Katana Practical Maga
by Fudoshin

#651310

Katana Practical Maga by Fudoshin

Handgeschmiedet

particularities: hand forged 1095er carbon steel, complex blade typ Soshu Kitae, blade hardness: HRC60, blade back: HRC40, lengh of the blade: 70cm, weight lengh: 102 cm, handle lengh: 27,5 cm, kassan: 8 / 6 mm, total katana: 1380 g, lacquered wood saya, handle is coated with authentic ray skin, handle is traditionally wrapped with cotton and silk thread, blade is razor-sharp, delivery includes katana, saya, cotton sword bag, gloss sword stands, easy cleaning and care kit and wooden box, authenticity certificate, for practical use / cut in training exercise designed

Katana Practical MÚgumi
by Fudoshin

#651416

Katana Practical MÚgumi by Fudoshin

Handgeschmiedet

Extras:
- Hand forged 1095 carbon steel
- Consuming of blade
- Blade Type soshu Kitae
- Blade: HRC60
- Back of the blade HRC40
- Length of the blade: 68 cm
- Total length: 102 cm
- Kassane: 7 / 4.5 mm
- Katana weight: 1000 g
- Saya weight: 230 g
- Brown lacquered wooden Saya is decorated with genuine mother of pearl
- Handle is coated with authentic ray skin
- Organic wrapping of cotton and silk is traditionally attached
- The sword is sharpened
- Included in delivery: katana, scabbard (saya), cloth sword bag, cleaning and care set, wooden box, and high-sword stand and certificate of authenticity..
- Designed for practical use in training / exercise section

Practical katana Odoiro nature ...
by Fudoshin

#651504

Practical katana Odoiro naturell by Fudoshin

Handarbeit

Hand Forged Katana with blade type Maru. Blade has no blood groove. Saya is black painted and partly decorated with brown bamboo. It is supplied with cloth bag and certificate of authenticity. The Katana Odorio can be used for cutting exercises.
Included: katana, scabbard (saya), cloth sword bag and certificate of authenticity.

Katana practical Shirakawa bla ...
by Musashi

#651525

Katana practical Shirakawa black Saya by Musashi

Here you will find the Katana Dragon of Musashi, the blade of the sword was made of 1060 carbon steel differenziall tempered. The Hamon of the sword is authentic in a Midare Gunome pattern. The blade has a blood Groove and is very sharp.
Included: Katana, scabbard (Saya), cloth sword sheath and Musashi Musashi authenticity certificate. Blade: differential gehärteteter 1060 carbon steel Saya: the saya is made of wood with a high-gloss finish, the Koiguchi from Bull's horn. The Sageo is made of black cotton. Tsuka: The Tsuba is made of blackened steel with a dragon motif. The Nakago is secured by two smoked bamboo of Mekugis in the handle. The handle is covered with Stingray skin imitation. The sword can be used for cutting exercises.

Practical katana Eda
by Fudoshin

#651551

Practical katana Eda by Fudoshin

Practical katana Eda

- Hand forged 1060 carbon steel - folded Damascus
- Real Hamon, blood groove

- Length of the blade: 73 cm
- Total length: 101 cm
- Total weight Katana: 1128 g
- Saya weight: 228 g
- Saya Material: Hard Wood
- Material of Sayamotives: genuine mother of pearl
- Handle length: 27 cm
- Shinogi hardness: HRC 45
- Blade hardness: HRC 56
- Blade thickness: 0.71 cm
- Blade edge: 4.5 cm

- Tsuba Material: Brass
- Traditional winding the handle with cotton
- Genuine ray skin

- Fuchigashira Material: Brass
- Mekugi: smoked bamboo Mekugi simply

- Manufacturer: Kagemusha
- The katana is sharpened and can be used for cutting exercises



For details on the Tsuka Menuki or are very easy to see on the photos for. Details are very easy to see on the photos for.

Included: katana, scabbard (saya), silk cover, sturdy box and certificate of authenticity.


Sales only to persons over 18 years. With this acquisition, we will need proof of age.

Practical katana Yuuhi
by Fudoshin

#651577

Practical katana Yuuhi by Fudoshin

Practical katana Yuuhi

- Hand forged 1060 carbon steel - folded Damascus
- Real Hamon, blood groove
- Length of the blade: 73 cm
- Total length: 101 cm
- Total weight Katana: 1128 g
- Saya weight: 228 g
- Saya Material: Hard Wood

It is a product of the practical use in training (Cutting) was conceived.

Practical katana Meiyo
by ONIKIRI

#651664

Practical katana Meiyo by ONIKIRI

Overall length: 104 cm Blade length: 71.75 cm, blade hardness: 58 HRC hardness shinogi: HRC 45 Blade width: 4.5 cm, blade thickness: 0.71 cm, blade: sharpened, Real Hamon, Tsuka length: 27 cm, total weight Katana: 1170 g Weight without Saya: 190 g, Seppa Material: iron, Ito Material: cotton, used for cutting exercises, Manufacturer: Onikiri

Here you will find hand-forged katana Meiyo, the blade of the sword was made from differentially hardened 1045 carbon steel. The Hamon of the sword is authentic. The blade has a blood groove and is sharpened. This katana can be used for cutting exercises.

- Blade: differentially gehärteteter 1045 carbon steel
- Saya: The saya is made of hard wood with a high gloss finish, the Koiguchi is from bull horn. The sageo is black cotton.
- Tsuka: The Tsuba is made of iron. The Nakago is secured by two smoked bamboo Mekugis under control. The handle is covered with imitation ray skin. Seppa: Iron

Included: katana, scabbard (saya), cloth sword bag and hand-written certificate of authenticity.

Katana Super Bitch in pink K99 ...
by ONIKIRI

#651835

Katana Super Bitch in pink K9970 by ONIKIRI

Katana Super Bitch pink in color - the modern version of a traditional Katana and a great gift idea!

- Hand forged 1045 carbon steel
- Blade Type Maru
- Length of the blade: 72 cm
- Total length: 103 cm
- Total weight Katana: 1105 g
- Saya weight: 234 g
- Lacquered wooden Saya
- Handle is coated with authentic ray skin
- Organic wrapping of cotton and silk is traditionally attached
- The sword is sharpened
- The tang is 2 Mekugi held and secured in the handle
- Manufacturer: Onikri

For details on the Tsuka Menuki or are very easy to see on the photos for. Definitions around the noble swords, see About.

Included: katana, scabbard (saya), sword cloth bag and certificate of authenticity.

Katana Practical Maho
by Jean Fuentes

#651862

Katana Practical Maho by Jean Fuentes

- 1045 carbon steel
- Blade Type Maru
- Blade: HRC60
- Back of the blade: HRC40
- Length of the blade: 68 cm
- Total length: 102 cm
- Lacquered wooden Saya

The handle is coated with authentic ray skin, the organic wrapping of cotton is traditionally attached. The blade is sharp.