Eickhorn KM2000
by Eickhorn

#53825101

Eickhorn KM2000 by Eickhorn

Double sided Tanto blade made of Boehler N695 steel (HRC 57) with black Kalgard coating and half serrated cutting edge. Fiberglas enforced synthetic cross guard. Black synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Comes with diamond sharpener. Overall length 30.2 cm. Blade length 17,2 cm. Blade thickness 5 mm. Total weight 330 g.

Eickhorn S.E.K.-P (Police)
by Eickhorn

#53825119

Eickhorn S.E.K.-P (Police) by Eickhorn

Special Emergency Knife, designed by Dietmar Pohl. Features: Special dagger blade. Emphasised cross guard on both sides for more safety. 10,5 cm long handle suitable also for use with gloves. Non-slip G-10 scales with rough grip surface. Large holes in the grip improve grip-safety and give better balance. Additional holes for optional safety cord. Solid steel construction made of stainless Boehler N695 steel (HRC 58). Two versions available. Blade with sand blasted dull finish. The special Kydex sheath allows lightning fast draw in emergency situations.

knives+knifes+daggers pocketknife travellerknife combat fighting camping survival

Eickhorn KM1000
by Eickhorn

#53825118

Eickhorn KM1000 by Eickhorn

KM1000 (Combat Knife 1000) - Tanto combat knife with laser cut dull finish blade made of corrosion free 440-A steel (HRC 56), presenting an especially attractive price/performance ratio. Fiberglas reinforced polyamide handle grip and sheath with lanyard fits all US - MOLLE and IDZ-carrying systems of the German Bundeswehr. Comes with diamond sharpener. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm. Weight 330 g.

Smith & Wesson 42766
by Smith & Wesson

#603666

Smith & Wesson 42766 by Smith & Wesson

Stiefeldolch-H.R.T. Black Boot

Boot Dagger with a handle made of cast material with rubber coating. Blade of 440C stainless steel. With leather sheath with belt clip. Blade length 125 mm,
Total length 240 mm.

Made in China.

Trench Knife
by Böker

#541101

Trench Knife by Böker

It was 1915 when Heinrich Boker & Co. Solingen received the government order to develop a compact fighting knife that would be especially useful for trench warfare. After 90 years, we are reproducing the original knife blade out of high carbon steel with 0.75% carbon. The pronounced steel crossguard, the wood forearm handle, (designed for a firm and safe grip), and the official tang stamp are identical to the original - as is the cowhide leather sheath. On the back of the blade, each knife shows its serial number.

Black KA-BAR
by KA-BAR

#602616

Black KA-BAR by KA-BAR

Messer der United States Marine Corps

The amerikansche knife manufacturer KA-BAR celebrates its 100th anniversary in 1998. The well-proven and well-known model is the USMC, the diameter of the United States Marine Corps, known from the second world war. The blades are made of 1095 high-carbon steel and are hardened at subzero temperatures of 120 degrees, Rockwell hardness 56 - 58 The blades have a black powder-Epoxydbeschcihtung. which serves both as corrosion protection, as well as protection from light reflection.

The legendary KA-BAR is now available in all black. Handle Material Kraton G elastomer with metal end. A black leather sheath is one of them.

Made in USA.

knives+knifes+daggers military+knifes combat fighting kabar

M16-14 CRKT Special Forces
by CRKT

#541650

M16-14 CRKT Special Forces by CRKT

The large version of the proven use knife. PVD-coated AUS-8 blade and both sides molded Carson Flippers. The knife is of course also equipped with the LAWKS backup. Black hardanodisierter aluminum handle. With pocket clip.
The knives are made from CRKT for a simple business philosophy: uncompromising function without fatigue in materials and technology. With the knife makers Jim Hammond, Ed Halligan and Harold "Kit" Carson CRKT real experts could win for themselves in the field of Tactical Knives. Their designs are among the top creations from CRKT.
Important! CRKT reserves the right to alter steel alloys without notice.

Eickhorn PRT X Tactical Tanto
by Eickhorn

#53802147

Eickhorn PRT X Tactical Tanto by Eickhorn

PRT X - Rescue knife with Tanto blade. Pocket rescue knife with black anodised AIMg3 aluminum grip, rubber lining and trousers clip (tip down attachment). Blade from stainless Böhler N695 steel (HRC 58) with black Kalgard coating and half serrated blade. Liner lock with safety stop, integrated safety-belt cutter and glass breaker. Overall length 20,5 cm. Blade 8,4 cm. Blade thickness 2,5 mm. Weight 125 g.

Karambit

#604379

Karambit

A new design of knives on the market. The pocket knife has a lockable blade made of 420 stainless steel. Through the ring at the end of the handle can not slip off the handle you. The handle is made of light metal. With clip.

Made in China.

Pocket Knives Karambit
by Haller

#604948

Pocket Knives Karambit by Haller

Pocket knife with a curved blade have an amazing cutting performance. These blades, which are known to gardeners for a long time, cutting through almost everything through butter. The blades of the lockable pocket knives are made of 420 stainless steel.
Through the ring at the end of the handle can not slip off the handle and the knife is safe in the hand. The handle is made of light metal with clip.

Made in China.

Eickhorn PRT VIII Tactical
by Eickhorn

#53802145

Eickhorn PRT VIII Tactical by Eickhorn

PRT VIII - Official equipment of the SEK Brandenburg (Special Task Force, Brandenburg). Spear point blade. Pocket rescue knife with black anodised AIMg3 aluminum grip, rubber lining and trousers clip (tip down attachment). Blade from stainless Böhler N695 steel (HRC 58) with black Kalgard coating and half serrated blade. Liner lock with safety stop, integrated safety-belt cutter and glass breaker. Overall length 20,5 cm. Blade 8,4 cm. Blade thickness 2,5 mm. Weight 125 g.

messer+dolche einhandtaschenmesser einhandmesser survival rettungsmesser klappmesser einsatzmesser tools tool outdoor camping kampfmesser tactical knife knives taktische taktisches messer freizeitmesser

Eickhorn S.E.K.-M (Marine)
by Eickhorn

#53825114

Eickhorn S.E.K.-M (Marine) by Eickhorn

Special Emergency Knife, designed by Dietmar Pohl. Features: Special dagger blade. Emphasised cross guard on both sides for more safety. 10,5 cm long handle suitable also for use with gloves. Non-slip G-10 scales with rough grip surface. Large holes in the grip improve grip-safety and give better balance. Additional holes for optional safety cord. Solid steel construction made of stainless Boehler N695 steel (HRC 58). Two versions available. Extremely resistant DLC carbon coating (diamond-like-carbon) for sea water environment. Additional micro serration for fishing nets. A Cordura sheath with Kydex lining allows a variety of fastenings (forearm, M.O.L.L.E.).

Eickhorn S.E.K. II WOOD
by Eickhorn

#53825141

Eickhorn S.E.K. II WOOD by Eickhorn

Single-Edge version of the extraordinary successful S.E.K. , with Spear-Point blade and reinforced blade back. Blade of Böhler N695 steel with satin finish. Darkbrown Ziricote wood handle. Dark brown boot knife sheath with clip. Overall length 21,5 cm. Blade length 10 cm. Blade thickness 5 mm. Weight 140 g.

messer+dolche dolchmesser stiefeldolch stiefeldolche stiefelmesser bootknive bootknife kampfmesser tactical knife knives taktische taktisches messer einsatzmesser militaermesser einsatzmesser armeemesser

Eickhorn POHL TWO G-10
by Eickhorn

#53825145

Eickhorn POHL TWO G-10 by Eickhorn

The fixed-blade version of the POHL ONE. Blade of Boehler K110 tool steel (HRC 59) with titanium-color Kalkgard coating to shield the blade against corrosion. G-10 handle with non-slip rough grip surface and glass-breaker. Overall length 26 cm. Blade thickness 5 mm. Weight 290 g.

Applegate-Fairbairn Combat II
by Böker

#541003

Applegate-Fairbairn Combat II by Böker

Boker's reissue of the Applegate-Fairbairn Fighting Knife uses fiberglass-reinforced Delrin handle, thickened in the center for a sure grip. A lanyard hole adds convenience. The handle meets a short, forward-bending cross guard that protects the fingers. Boker achieved the knife's preferred rearward balance by inserting steel weights into the handle - a beautifully ergonomic design. The 6 blade on this 10 3/4 knife has effective reach, with a 1 wide blade that's beefy all the way to the tip. Struck of Solingen 440C stainless steel hardened to a Rockwell of 58, the blade has the signatures of Rex Applegate and W.E. Fairbairn etched into the bead-blasted finish. Sheathed in durable Cordura.

Applegate-Fairbairn Black
by Böker

#541004

Applegate-Fairbairn Black by Böker

Boker's reissue of the Applegate-Fairbairn Fighting Knife uses fiberglass-reinforced Delrin handle, thickened in the center for a sure grip. A lanyard hole adds convenience. The handle meets a short, forward-bending cross guard that protects the fingers. Boker achieved the knife's preferred rearward balance by inserting steel weights into the handle - a beautifully ergonomic design. The 6 blade on this 10 3/4 knife has effective reach, with a 1 wide blade that's beefy all the way to the tip. Struck of Solingen 440C with a black coated blade and black guards.stainless steel hardened to a Rockwell of 58, the blade has the signatures of Rex Applegate and W.E. Fairbairn etched into the bead-blasted finish. Sheathed in durable Cordura.

Böker Schweizer Dolch
by Böker

#542489

Böker Schweizer Dolch by Böker

Swiss daggers usually were not as a piece of equipment issued, but mostly privately procured by the soldiers and then served as a secondary weapon. The design of hand protection and closing knob is characteristic for the Swiss dagger.
The handles of the Boker Swiss dagger are made from handpicked cherry wood. The sharpened on both sides and tapering blade of the dagger had a cross-section in the shape of a diamond historical models. This design turned out to be extremely stable and effective. Blade material carbon steel C75 is processed as the present model with an impressive blade length 21.9 cm.
The blade is satin and bears the original Boker blade drawing from the 1930s. The logo and the individual serial number guarantee the authenticity of the knife and stand for a consistently high production quality.
Delivery incl. elaborate metal sheath historical model.

knives+knifes+daggers daggers combat fighting army+daggers military+daggers military+knifes army+knifes

Magnum Bailey Ziel 3 PC. Set
by Magnum

#542893

Magnum Bailey Ziel 3 PC. Set by Magnum

John Bailey's newest throwing knife design for beginners and professionals. The 360 ​​g heavy all-steel construction 420 stainless steel is well balanced and guaranteed fun and pleasure each throw. The grooves and depressions were made according to a strict set of Bailey pattern.

messer+dolche militaer militaermesser militärmesser armeemesser kampfmesser tactical knife knivestaschenmesser klappmesser einsatzmesser divers

Survivor
by MAGNUM

#543082

Survivor by MAGNUM

The massive blade made of 440 stainless steel with a thickness of 6 mm is continuous at full strength until the end of the handle and opens into a massive hammer surface. The lederumwickelte handle fits comfortably and securely in your hand. The extremely stable blade shape the blade when cutting, carving or other work is indestructible.

messer+dolche kampfmesser tactical knife knives taktische taktisches messer tanto waffen laender+regionen einsatzmesser

Pocket Khukri
by Magnum

#543460

Pocket Khukri by Magnum

Who knows the Nepalese model, will be thrilled with how well the Pocket Khukri not only the appearance but also to some extent shows the original dimensions. If the 440 stainless blade is extended and shows its impressive length of about 12 cm, the potential of the jackknife is clear.

It is suitable for hervorrasgend spirited work for carving or for all outdoor activities. The Linerlock secures the blade in the open position. The G10 handle is lined with steel plates and ensures the necessary stability.

Boker A-F 4.5 (four-five)
by Böker

#5455116

Boker A-F 4.5 (four-five) by Böker

Already since the beginning of the series, it is a matter of course, the classic Applegate Fairbairn a smaller version to the page to the place. It was high time to make this project finally for the very successfully by Bill Harsey revised updated version 5.5 on the legs.

The four and a half inch blade length 4.5 has all the virtues of its big brother, but enjoys a greater manageability, controllability and an increased comfort. The proportions were carefully adapted a new scale, the undoubted strengths of this concept to maintaining restrictions.

The blade from N690 and Parry elements have a durable finish of Stonewash-. Radiated canvas Micartagriffschalen. Supplied with high-quality Cordura Sheath.

knives+knifes+daggers pocketknife travellerknife combat fighting camping survival

Military & Police MP6 handle s ...
by Smith & Wesson

#6010191

Military & Police MP6 handle sand color / black by Smith & Wesson

Pocket knife with patented spring-assisted opening mechanism and locking lever. The blade is made of 4034 stainless steel. Locking takes classic to a liner lock.

The handle is made of light metal with clip.

Boot Dagger 40406

#603558

Boot Dagger 40406

Dolch

This dagger can be worn horizontally or vertically on the arm, leg and belt.
The blade is black oxide.

Manufactured in Taiwan.

Integral knife
by BlackField

#605328

Integral knife by BlackField

This knife is provided with an anti-reflection coating, has finger grooves and a sanitary pad. Sheath with additional cord for winding handle.

Made in China.