some of our products in this category
incl. VAT + shipping
#6010452
Smith & Wesson Stiefeldolch
Kräftiger Stiefeldolch mit Klinge aus 8CR13MOV rostfreiem Stahl im stonewashed-finish. Als Griffbeschalung sind zwei G10 Schalen aufgeschraubt.
messer+dolche dolchmesser stiefeldolch stiefeldolche stiefelmesser bootknive bootknife kampfmesser tactical knife knives taktische taktisches messer einsatzmesser militaermesser einsatzmesser armeemesser
Eickhorn KM4000
by Eickhorn
incl. VAT + shipping
#53825130
Eickhorn KM4000 by Eickhorn
The new KM4000 offers additional functions in relation to the advanced KM3000: wire cutter and back saw. It also features a new tanto blade design and a glass breaker at the end of the handle. Fiberglass enforced synthetic handle. Blade made of 55Si7 spring steel, with black Kalgard coating against corrosion. Synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
Eickhorn KM2000
by Eickhorn
incl. VAT + shipping
#53825101
Eickhorn KM2000 by Eickhorn
Double sided Tanto blade made of Boehler N695 steel (HRC 57) with black Kalgard coating and half serrated cutting edge. Fiberglas enforced synthetic cross guard. Black synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Comes with diamond sharpener. Overall length 30.2 cm. Blade length 17,2 cm. Blade thickness 5 mm. Total weight 330 g.
Eickhorn S.E.K. II G-10
by Eickhorn
incl. VAT + shipping
#53825140
Eickhorn S.E.K. II G-10 by Eickhorn
Single-Edge version of the extraordinary successful S.E.K., with Spear-Point blade and reinforced blade back. Blade of Böhler N695 steel with dull finish. G-10 rough grip handle. Comes in Kydex sheath. Overall length 21,5 cm. Blade length 10 cm. Blade thickness 5 mm. Weight 140 g.
U.S.M.C. Fighting Knive
by KA-BAR
incl. VAT + shipping
#602613
U.S.M.C. Fighting Knive by KA-BAR
Messer der United States Marine Corps
The amerikansche knife manufacturer KA-BAR celebrates its 100th anniversary in 1998. The well-proven and well-known model is the USMC, the diameter of the United States Marine Corps, known from the second world war.
The blades are made of 1095 high-carbon steel and are hardened at subzero temperatures of 120 degrees, Rockwell hardness 56-58.
The blades have a black powder-Epoxydbeschcihtung. which serves both as corrosion protection, as well as protection from light reflection.
Made in USA.
Eickhorn KM2000-BW (German Arm ...
by Eickhorn
incl. VAT + shipping
#53825102
Eickhorn KM2000-BW (German Army Original Version) by Eickhorn
The official combat knife of the German armed forces with the NATO supply number 1095-12-355-6742. Double sided Tanto blade made of 1.4110 stainless steel with black Kalgard coating and half serrated cutting edge. Fiberglas enforced synthetic cross guard. Black synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Comes with diamond sharpener. Overall length 30.2 cm. Blade length 17,2 cm. Blade thickness 5 mm. Total weight 330 g.
BlackField tactical machete
by BlackField
incl. VAT + shipping
#606121
BlackField tactical machete by BlackField
A powerful machete with non-slip rubber grip for a secure hand position. The titanium-coated blade is made of 420 stainless steel, and has a thickness of 6.5 mm at its widest point.
What different carrier opportunities with strong Nylon Sheath.
Smith & Wesson 42766
by Smith & Wesson
incl. VAT + shipping
#603666
Smith & Wesson 42766 by Smith & Wesson
Stiefeldolch-H.R.T. Black Boot
Boot Dagger with a handle made of cast material with rubber coating. Blade of 440C stainless steel. With leather sheath with belt clip. Blade length 125 mm,
Total length 240 mm.
Made in China.
Smith & Wesson 42769
by Smith & Wesson
incl. VAT + shipping
#603669
Smith & Wesson 42769 by Smith & Wesson
Stiefeldolch-H.R.T. Boot
Boot dagger with handle in non-slip rubber. Blade of 440C stainless steel. With scabbard. Blade length 90 mm, overall length 190 mm.
Made in China.
incl. VAT + shipping
#603555
Boot Dagger 80737
Stiefeldolch
Boot Dagger with Holzbeschahlung and stainless steel blade, cross guard and butt cap made of brass.
With scabbard. Blade is sharp.
Made in Pakistan.
Eickhorn DESERT COMMAND II
by Eickhorn
incl. VAT + shipping
#53825123
Eickhorn DESERT COMMAND II by Eickhorn
Upon request of experienced soldiers master designer Dietmar Pohl developed the KM3000 model with a spear point blade tip which offers the soldier a far wider application spectrum. In order to hold its own in desert-like surroundings Eickhorn additionally offers the DESERT COMMAND II in a coyote-coloured version. Boehler N695 steel blade (HRC 57) with black Kalgard coating and half serrated cutting edge. Carrying system as per model DESERT COMMAND I. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm. Weight 330 g.
Eickhorn KM5000
by Eickhorn
incl. VAT + shipping
#53825132
Eickhorn KM5000 by Eickhorn
Combat Knife with highly flexible blade of 55Si7 spring steel. Hollow-ground for better cutting performance and Kalgard coated against corrosion. Carrying system fits MOLLE and IdZ standard. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
Military line carrier F22 clip ...
by BlackField
incl. VAT + shipping
#6010361
Military line carrier F22 clip point by BlackField
Survival knives with coated blade, 1070-high-carbon steel (not stainless). Various bits are inserted into the screw-on hollow metal handle.
The Nylon Sheath has a plastic holder for mounting of the blade, as well as a front pocket.
Black KA-BAR
by KA-BAR
incl. VAT + shipping
#602616
Black KA-BAR by KA-BAR
Messer der United States Marine Corps
The amerikansche knife manufacturer KA-BAR celebrates its 100th anniversary in 1998. The well-proven and well-known model is the USMC, the diameter of the United States Marine Corps, known from the second world war. The blades are made of 1095 high-carbon steel and are hardened at subzero temperatures of 120 degrees, Rockwell hardness 56 - 58 The blades have a black powder-Epoxydbeschcihtung. which serves both as corrosion protection, as well as protection from light reflection.
The legendary KA-BAR is now available in all black. Handle Material Kraton G elastomer with metal end. A black leather sheath is one of them.
Made in USA.
Muela Mouse
by Muela
incl. VAT + shipping
#603017
Muela Mouse by Muela
Muela Jagdmesser
The Spanish tradition manufacturer Muela hunting knife. All blades are as flat fishing by the end of the handle fully, so that no vulnerabilities exist. The blades are, like all Muela knives, molybdenum vanadium high-performance steel 440 C stainless steel. A strong belt sheath belongs to any knife.
This knife is a credit to his name. It is small and has a very unusual shape of the blade. But maybe this is it cutting work ideally suited for many and is very good and secure in the hand. The handle is made of impregnated wood.
Manufactured in Spain.
knives+knifes+daggers military+knifes camping survival muela
incl. VAT + shipping
#603556
Boot Dagger 80738
Boot Dagger with black Kunststoffbeschalung and stainless steel blade, cross guard and butt cap made of brass. Comes complete with sheath including belt clip.
Made in Pakistan.
Gurkha
by Haller
incl. VAT + shipping
#605389
Gurkha by Haller
Made in India.
messer+dolche militaer militaermesser militärmesser armeemesser kampfmesser tactical knife knives taktische taktisches messer einsatzmesser kukri khukri ghurka gurka gurkha machete buschmesser
Survival Knife
by Haller
incl. VAT + shipping
#605430
Survival Knife by Haller
Made in China.
Black Ka-Bar
by Ka-bar
incl. VAT + shipping
#605647
Black Ka-Bar by Ka-bar
Blade of 1095 carbon steel coated with black epoxy powder, Kraton handle.