similar items like taschenmesser you will find here...
Eickhorn KM4000
by Eickhorn
#53825130
Eickhorn KM4000 by Eickhorn
The new KM4000 offers additional functions in relation to the advanced KM3000: wire cutter and back saw. It also features a new tanto blade design and a glass breaker at the end of the handle. Fiberglass enforced synthetic handle. Blade made of 55Si7 spring steel, with black Kalgard coating against corrosion. Synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
knives+knifes+daggers pocketknife travellerknife combat fighting camping survival
Eickhorn RECONDO III
by Eickhorn
#53825131
Eickhorn RECONDO III by Eickhorn
The new RECONDO III offers additional functions in relation to the advanced DESERT COMMAND II: wire cutter and back saw. It also features a new tanto blade design and a glass breaker at the end of the handle. Fiberglass enforced synthetic handle. Blade made of 55Si7 spring steel, with black Kalgard coating against corrosion. Synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
knives+knifes+daggers pocketknife travellerknife combat fighting camping survival
Neck Knife 40408
by Haller
#605819
Neck Knife 40408 by Haller
The blade is 420 stainless steel and comes fully through to the end of the handle.
The riveted handle is made of plastic. The Kydex sheath has a ball chain made of metal.
The idea of ​​a Neck Knife is simple. A knife with a sheath that you can hang around your neck. So the knife is independent to wear a belt or pocket and anytime ready for access.
This results in specific requirements of the knife:
- It must be easy, for hanging around your neck you can feel every gram of unnecessary
- It must be securely seated in the vagina, since it hanging upside down in the vagina
- It must at the same time can be drawn without much force required, as you could otherwise injure themselves
Therefore, especially Kydex sheaths have prevailed with a click or snap lock in this area. The weight in each case including vagina.
Eickhorn S.E.K.-P (Police)
by Eickhorn
#53825119
Eickhorn S.E.K.-P (Police) by Eickhorn
Special Emergency Knife, designed by Dietmar Pohl. Features: Special dagger blade. Emphasised cross guard on both sides for more safety. 10,5 cm long handle suitable also for use with gloves. Non-slip G-10 scales with rough grip surface. Large holes in the grip improve grip-safety and give better balance. Additional holes for optional safety cord. Solid steel construction made of stainless Boehler N695 steel (HRC 58). Two versions available. Blade with sand blasted dull finish. The special Kydex sheath allows lightning fast draw in emergency situations.
Neck Knife 80442
by Haller
#606006
Neck Knife 80442 by Haller
The single-edged dagger-shaped blade made of 420 stainless steel, the handle is made of non-slip rubber. The Kydex sheath has a ball chain made of metal.
The idea of ​​a Neck Knife is simple. A knife with a sheath that you can hang around your neck. So the knife is independent to wear a belt or pocket and anytime ready for access.
This results in specific requirements of the knife:
- It must be easy, for hanging around your neck you can feel every gram of unnecessary
- It must be securely seated in the vagina, since it hanging upside down in the vagina
- It must at the same time can be drawn without much force required, as you could otherwise injure themselves
Therefore, especially Kydex sheaths have prevailed with a click or snap lock in this area. The weight in each case including vagina.
BlackField tactical axe 2.0
by BlackField
#6010370
BlackField tactical axe 2.0 by BlackField
A strong tactical axe entirely in black. The axe blade is made of 420 stainless steel, black-coated, sturdy nylon fiber handle.
messer+dolche taschenmesser travellermesser fahrtenmesser camping jagdmesser axt beil outdoor
Switchblade knives
by Haller
#605401
Switchblade knives by Haller
mit heller Klinge
Switchblade knives made of 420 stainless steel. Handle scales made of plastic.
Made in China.
messer+dolche taschenmesser klappmesser einhandtaschenmesser einhandmesser springmesser springermesser einsatzmesser tactical knives
Eickhorn S.E.K.-M (Marine)
by Eickhorn
#53825113
Eickhorn S.E.K.-M (Marine) by Eickhorn
Special Emergency Knife, designed by Dietmar Pohl. Features: Special dagger blade. Emphasised cross guard on both sides for more safety. 10,5 cm long handle suitable also for use with gloves. Non-slip G-10 scales with rough grip surface. Large holes in the grip improve grip-safety and give better balance. Additional holes for optional safety cord. Solid steel construction made of stainless Boehler N695 steel (HRC 58). Two versions available. Extremely resistant DLC carbon coating (diamond-like-carbon) for sea water environment. Additional micro serration for fishing nets. A Cordura sheath with Kydex lining allows a variety of fastenings (forearm, M.O.L.L.E.).
Jackknife Stiletto black
by Haller
#605342
Jackknife Stiletto black by Haller
Manufactured in Taiwan.
messer+dolche taschenmesser klappmesser einhandtaschenmesser einhandmesser springmesser springermesser einsatzmesser tactical knives stillet stllett stiletto stilletto
BlackField desert thorn
by BlackField
#6010371
BlackField desert thorn by BlackField
An extraordinary rescue Karambit is the BlackField DESERT THORN, with the typical ring at the end of the handle, which the knife is particularly safe in hand Pocket knife.
The blade is made of 440 stainless steel and black coated. The handle is made of light metal with a plastic coating. In addition, the knife is equipped with a belt cutter, a glass crusher and a belt clip.
Eickhorn S.E.K. II G-10
by Eickhorn
#53825140
Eickhorn S.E.K. II G-10 by Eickhorn
Single-Edge version of the extraordinary successful S.E.K., with Spear-Point blade and reinforced blade back. Blade of Böhler N695 steel with dull finish. G-10 rough grip handle. Comes in Kydex sheath. Overall length 21,5 cm. Blade length 10 cm. Blade thickness 5 mm. Weight 140 g.
Haller Select Springmesser Spr ...
#6010417
Haller Select Springmesser Sprogur Pakkaholz
Die 83 mm lange Klinge des Stiletto-Springmessers ist aus 440 rostfreiem Stahl. Die Sicherung im Griff verhindert ein unbeabsichtigtes Aufspringen der Klinge.
knives+knifes+daggers pocketknife camping hunting switch+blade+knife
BlackField night thorn
by BlackField
#6010365
BlackField night thorn by BlackField
An extraordinary rescue Karambit is the BlackField NIGHT THORN, with the typical ring at the end of the handle, which the knife is particularly safe in hand Pocket knife.
The blade is made of 440 stainless steel and black coated. The handle is made of light metal with a plastic coating. In addition, the knife is equipped with a belt cutter, a glass crusher and a belt clip.
Stiletto penknife XXL
by Haller
#6010245
Stiletto penknife XXL by Haller
With spring-assisted blade opening!
The titanium-coated dagger blade made of 420 stainless steel is secured with a liner lock. The blade is sharpened on one side only.
The handle is also made of light metal titanium coated and has a Pakka wood inlay.
#604385
Jackknife
The switchblade knife is equipped with an extremely powerful spring. The blade made of 420 stainless steel.
Made in China.
Stiletto Butterfly 83801
by Haller
#6010145
Stiletto Butterfly 83801 by Haller
A folding knife in the design of a butterfly knife. The handle is made of light metal with belt clip.
Eickhorn KM3000, plain blade
by Eickhorn
#53825122
Eickhorn KM3000, plain blade by Eickhorn
Upon request of experienced soldiers master designer Dietmar Pohl developed the KM3000 model with a spear point blade tip which offers the soldier a far wider application spectrum. Boehler N695 steel blade (HRC 57) with black Kalgard coating. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm. Weight 330 g.
Eickhorn DESERT COMMAND I
by Eickhorn
#53825115
Eickhorn DESERT COMMAND I by Eickhorn
To meet the conditions of desert-like operational areas, Eickhorn meanwhile offers the KM2000 in coyote colourings. In its version DESERT COMMAND I it perfectly adapts to the desert camouflage scheme. Double sided Tanto blade made of Boehler N695 steel (HRC 57) with black Kalgard coating and half serrated cutting edge. Fiberglas enforced synthetic cross guard. Coyote cultured synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Comes with diamond sharpener. Overall length 30.2 cm. Blade length 17,2 cm. Blade thickness 5 mm. Total weight 330 g.
Switchblade stiletto Red
by Haller
#605344
Switchblade stiletto Red by Haller
Manufactured in Taiwan.
Switchblade stiletto heel blue
by Haller
#605345
Switchblade stiletto heel blue by Haller
Manufactured in Taiwan.
#53210513
Dagger
Dagger with white perlex handle, brass guard and pommel. 440 stainless blade. Leather sheath.
Damascus pocket knife
by Haller
#605223
Damascus pocket knife by Haller
The blade of the lockable pocket knife is made from 39 layers of stainless steel. This is the core layer of 440C steel.
Noble Backlock pocket knife with nickel silver bolsters and handle made of burl wood. The gift box is made of wood.
Made in China.
Eickhorn S.E.K.-M (Marine)
by Eickhorn
#53825114
Eickhorn S.E.K.-M (Marine) by Eickhorn
Special Emergency Knife, designed by Dietmar Pohl. Features: Special dagger blade. Emphasised cross guard on both sides for more safety. 10,5 cm long handle suitable also for use with gloves. Non-slip G-10 scales with rough grip surface. Large holes in the grip improve grip-safety and give better balance. Additional holes for optional safety cord. Solid steel construction made of stainless Boehler N695 steel (HRC 58). Two versions available. Extremely resistant DLC carbon coating (diamond-like-carbon) for sea water environment. Additional micro serration for fishing nets. A Cordura sheath with Kydex lining allows a variety of fastenings (forearm, M.O.L.L.E.).
#53215715
Kris blade dagger
Dagger with kris blade, 420 steel stainless. Grenadill wood handle with nickel silver mountings. Special sheath.
Dream Scorpion
by Magnum
#545256
Dream Scorpion by Magnum
This slim and extremely elegant rescue knife is a real eye-catcher. Decorated in colors of the rainbow knife is decorated with a very detailed scorpion on the grip. The flipper opens the spring support 440 stainless steel blade quickly. Of course, with glass breaker, seat belt cutter and clip.
Coubi bone
by Citadel
#6010044
Coubi bone by Citadel
The model Coubi is the smallest of the Citadel Pocket knives.
The blade is hand forged from N690Co stainless steel with a hardness of 58-60 ° Rockwell.
The back of the blade is finely decorated on the approach. The handle scales is boned with red trim inserts between boards and handles.
The lock of the blade via a liner lock.
Italian Switchblade Classic wi ...
#53303821
Italian Switchblade Classic with Buffalo Horn Handle
Classic original italian switchblade knife with lockable 420 stainless steel blade. 8 1/4 overall.
Eickhorn PARA COMMANDO
by Eickhorn
#53825111
Eickhorn PARA COMMANDO by Eickhorn
PARA COMMANDO - With an overall length of 31,3 cm and a wire cutter it is excellently suited for all tasks in active service. Blade made of 55Si7 spring steel (HRC 53), Kalgard coated. Grip made of fibre-glass reinforced polyamide. The polyamide sheath with strap fits all U.S.-M.O.L.L.E. and IDZ carrying systems of the German Bundeswehr. Diamond blade sharpener. Blade 18,3 cm. Blade thickness 3,6 mm. Weight 270 g.
knives+knifes+daggers pocketknife travellerknife combat fighting camping survival
Stiletto Ebony
by Haller
#6010011
Stiletto Ebony by Haller
A classic as Lockback design.
The blade is 420 stainless steel, the handle made of ebony.
Switchblade stiletto white
by Haller
#605343
Switchblade stiletto white by Haller
Manufactured in Taiwan.
Einhandmesser - Zombie 7008
by Jean Fuentes
#651992
Einhandmesser - Zombie 7008 by Jean Fuentes
Blade lock-locked system. The knife has a black blade with biohazard symbols. With belt clip and window breaker.
- Pocket knife with a blade
- Metal-plastic handle
Technical data:
Weight: 205 g
Handle Length: 125 mm
Blade length: 90 mm
Length open: 215 mm
Damascus pocket knife
by Haller
#605222
Damascus pocket knife by Haller
The blade of the lockable pocket knife is made from 39 layers of stainless steel. This is the core layer of 440C steel.
Noble Backlock pocket knife with nickel silver bolsters and handle made of burl wood. The gift box is made of wood.
Made in China.
BlackField carbon
by BlackField
#606115
BlackField carbon by BlackField
An elegant Switchblade with a single-sided polished 440 stainless steel blade. Highlight of this knife is the handle scales made of light metal with a core made of carbon fiber.
With belt clip.
knives+knifes+daggers pocketknife camping hunting switch+blade+knife
Haller Tanto Neck Knife
by Haller
#603119
Haller Tanto Neck Knife by Haller
Neck Knives
Blade length 75 mm, overall length 175 mm
A Neck Knife is always useful if the traditional ways a knife with him to wear is not feasible. This problem also occurs at the sport. Obviously you have a knife in such certain requirements: it must be easy, it must be flat, it should not apply too much and also it should be handy. A skeletal knife with black coated Tanto blade made of 420 stainless steel. With only 68 grams, it is very easy. On the blade is fully through a black plastic wrap upset. The Tanto Neck Knife is distinguished with a Kydex whistle delivered.
Karambit
by Fox
#604344
Karambit by Fox
A new pocket knife with curved blade and handle idea and with finger hole at the end of the handle. This knife is very secure in the hand and the risk of slipping. The blade is made of 440C stainless steel. With belt clip. The handle is made of G10, the black coated blade .. The lockable blade can be quickly opened with one hand.
Made in Italy.
R.A.K..
by BlackField
#6010367
R.A.K.. by BlackField
The rescue automatic knife is the first rescue Switchblade by BlackField.
The powerful blade is 440 black coated stainless steel, and partial. The handle scales is made of machined G10.
The R.A.K.. is equipped with safety device to prevent an accidental popping up the blade. It also features a belt clip, a belt cutter and a glass Crusher.
#6010465
Schrade Karambit Neck Knife
Karambit Messer mit Klinge aus 9Cr18MoV rostfreiem Stahl.
Mit Kydexscheide und Kugelkette aus Metall.
Blackfield switchblade Rhino
by BlackField
#6010305
Blackfield switchblade Rhino by BlackField
The Jackknife Rhino is equipped with a very broad and strong blade.
The blade is 440 stainless steel, titanium-coated and provided with a part serrated edge. The handle is made of indestructible G10. To prevent accidental jump up the blade fuse is installed. On the back of the handle, a clip is attached.
The knife is designed so that it can be used easily with gloves and is good in the hand.
BlackField R.P.K. 04
by BlackField
#6010317
BlackField R.P.K. 04 by BlackField
This BlackField Rescuemesser is equipped with a black coated blade made of 440 stainless steel, which is equipped with a partial scalloped edge, and is secured with a liner lock.
Through the spring supported opening of blade, the knife is instantly ready for use. The handle scales is made of light alloy. Of course, a belt cutter and a glass Crusher are integrated in the handle.
With belt clip.
#603484
Key Chain 84210
Schlüsselanhänger
Cheap Key Chain for the young clientele.
Stainless steel blade. In the form of miniature pistols / revolvers.
Made in China.
Haller Select Springmesser Spr ...
#6010416
Haller Select Springmesser Sprogur Olive
Die 83 mm lange Klinge des Stiletto-Springmessers ist aus 440 rostfreiem Stahl. Die Sicherung im Griff verhindert ein unbeabsichtigtes Aufspringen der Klinge.
Smith & Wesson Military & Poli ...
#6010457
Smith & Wesson Military & Police Stiletto Taschenmesser
Ein Stiletto Taschenmesser mit Liner-Lock Arretierung und Gürtelclip. Die Klinge ist aus 8CR13 MoV rostfreiem Stahl und schwarz beschichtet. Die Griffbeschalung ist aus Kunststoff.
Eickhorn KM3000, part serrated ...
by Eickhorn
#53825116
Eickhorn KM3000, part serrated blade by Eickhorn
Upon request of experienced soldiers master designer Dietmar Pohl developed the KM3000 model with a spear point blade tip which offers the soldier a far wider application spectrum. Boehler N695 steel blade (HRC 57) with black Kalgard coating. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm. Weight 330 g.
knives+knifes+daggers pocketknife travellerknife combat fighting camping survival
Extreme OPS Karambit
by Smith & Wesson
#604307
Extreme OPS Karambit by Smith & Wesson
An identifiable cover pocket knife. Through the ring at the end of the handle you can not slide off of the handle. With belt clip. The handle scales is made of G10.
Made in China.
Spanish folders
by Linder
#53524042
Spanish folders by Linder
Decorated brass handles. 440 stainless steel blades. Pakka wood handle.
Zombie Bat
by Haller Zombie De ...
#6010270
Zombie Bat by Haller Zombie Dead
This interesting pocket knife has two blades that can be opened on the flipper or the Einhandpin thanks spring support flash.
The blades are made of 420 stainless steel, black coated and can be locked with a liner lock. The handle is made of light metal and has a belt clip on the back.
Eickhorn RT-I-TAC
by Eickhorn
#53820116
Eickhorn RT-I-TAC by Eickhorn
RT-I-TAC - Especially for rescue teams the RT-I-TAC - model was developed on the basis of the legendary Eickhorn LL80 knife for paratroopers. Among the most important characteristics of the knife is the blade with the half serrated cutting edge. Clothing, belts, straps or core coated ropes up to 11 mm present no problem for this blade. The blade can be opened onehandedly even with gloves, without any danger to the hand. A glass breaker facilitates rescue through window panes. The fold-out thorn sensibly widens the field of action of the RT-I-TAC. For cleaning purposes the RT-I-TAC can be completely dismantled. The blade is made of stainless 440-A steel (HRC 56). Fibre glass reinforced polyamide grip. Overall length 22,2 cm. Blade 8,5 cm. Blade thickness 3,3 mm. Weight 210 g.
Pocket knife
by Haller
#605410
Pocket knife by Haller
Pocket knife with Backlock closure and engraving plate in the handle. The handle scales is pakka - and layer of wood. incl. gift box
Made in China.
Damascus knives
by Haller
#605221
Damascus knives by Haller
The blade is made from 39 layers of stainless Damascus. The core layer is made of 440C steel. With handle made of burl wood, the guard and the Endknauf are made of nickel silver. With leather sheath.
Made in China.
Neck Knife Black 80444
by Haller
#606008
Neck Knife Black 80444 by Haller
Made entirely of 420 stainless steel, black coated and broken on the handle. With Kydex sheath and ball chain made of metal.
One-hand knife KY211
by Kyu Line
#651363
One-hand knife KY211 by Kyu Line
- blade of Lock system locked
- plastic handle
Red Karambit
by Haller
#6010105
Red Karambit by Haller
The black coated blade is made of 420 stainless steel and locked by means of liner lock.
The handle is made of light metal. With belt clip and belt cutter.
The blade shape originated in the Indonesian Karambit space and can be traced back to the 11th century. The curved blade shape is excellent for drawing cuts. Be locked by means of the blade Liner lock.
Stiletto pocket knife 83216
by Haller
#606051
Stiletto pocket knife 83216 by Haller
Particularly interesting is this pocket knife is its partially black coated blade with decorative holes.
The blade in stiletto form is not polished 420 stainless steel and the back of the blade. The locking of the blade by means of liner lock.
The handle is made of light metal with clip.
Jackknife
by Haller
#605416
Jackknife by Haller
A small, yet very powerful flick knife with securing. The blade is 420 stainless steel, black coated. The handle is made of light metal and G10, with clip.
Made in China.
Linder Zac
by Linder
#53305712
Linder Zac by Linder
Nice little switchblade knife with cordura pouch. Metal/wood handle, 420 stainless steel blade.
#53210613
Dagger
Dagger with cocobola wood handle, brass guard and pommel. 440 stainless blade. Leather sheath.
Essential
by BlackField
#605330
Essential by BlackField
This small multi-function tool has a bottle opener, hex wrench, a seat belt cutter and a screwdriver.
Made in China.
Eickhorn PRT VIII Tactical
by Eickhorn
#53802145
Eickhorn PRT VIII Tactical by Eickhorn
PRT VIII - Official equipment of the SEK Brandenburg (Special Task Force, Brandenburg). Spear point blade. Pocket rescue knife with black anodised AIMg3 aluminum grip, rubber lining and trousers clip (tip down attachment). Blade from stainless Böhler N695 steel (HRC 58) with black Kalgard coating and half serrated blade. Liner lock with safety stop, integrated safety-belt cutter and glass breaker. Overall length 20,5 cm. Blade 8,4 cm. Blade thickness 2,5 mm. Weight 125 g.
