Ronin-Katana
by Citadel

#605713

Ronin-Katana by Citadel

Good swords there are many, perfection, however rare. Samurai swords made by Citadel among the best available to buy -next a real Nihonto- on the market. Perfection without "if" and "but" down to the smallest detail. Each sword is completely made by hand. Each participating artisans is a master of his craft. The production of such a work of art takes up to three months and makes each piece unique.

Many samurai swords from mass production, only one strip Same (ray skin) is often glued to each page. In the Citadel complete handle is surrounded by the highest quality ray skin. The winding handle (Ito), made from the finest Japanese silk, is tight in Hineri Maki - fitted style. The strands of the nodes intersect it mutually. Underlaid is the winding (Tsuka Maki) of traditional, folded paper triangles, called Hishigami. The flat-shaped handle (Tsuka) was adjusted 100% to the Angel. A bamboo pen (Mekugi) holds handle and Angel together. As with the historical originals this is conical.

Butt end (Kashira) and grip ferrule (fuchi) are made of iron, covered with simple, but elegant, high-gloss black lacquer. Also iron is the tsuba, which was not cast but made by hand. Ornamental rate (Menuki) with silver plated bronze offer a nice contrast to the dark winding handle (Tsuka-Maki) and underline the graceful picture.

Both the handle (Tsuka), as well as the vagina (Saya) Jakwood dried was used.

In addition to the excellent strength properties, it is also because of its low acid fraction, since it does not damage the blade. Was painted the vagina in matte black, in so
mentioned Ishime style. Vaginal opening (Koiguchi), eye (kurigata) and vaginal degree (Kojiri) are made of water buffalo horn and were adapted in most elaborate handwork. The scabbard (saya) is made individually for each blade individually and ensures absolute fit. With light pressure allows the blade detached from the vagina, but it certainly holds otherwise.

The blade is made of 1075 carbon steel (not stainless). Under traditional Lehmbestrich this was differentiated to 60 HRC on the edge and about 40 HRC hardened at the back of the blade. Directly onto the blade, the blade collar (habaki) was forged. Only then is it possible to guarantee a perfect fit. Through the skills of the polisher the masterful work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result.

As each sword is unique, dimensions and weight may vary. Delivery without sword stand.

Made in Cambodia.

Yushu-Katana
by Citadel

#605711

Yushu-Katana by Citadel

Weight (without scabbard) 1050 g. Good swords there are many, perfection, however rare. Samurai swords made by Citadel among the best available to buy -next a real Nihonto- on the market. Perfection without "if" and "but" down to the smallest detail. Each sword is completely made by hand.
Each participating artisans is a master of his craft. The production of such a work of art takes up to three months and makes each piece unique.
Many samurai swords from mass production, only one strip Same (ray skin) is often glued to each page. In the Citadel complete handle is surrounded by the highest quality ray skin. The winding handle (Ito), made from the finest Japanese silk, is tight in Katate Maki - style attached. The strands of the nodes intersect it mutually. Underlaid is the winding (Tsuka Maki) of traditional, folded paper triangles, called Hishigami. The flat-shaped handle (Tsuka) was adjusted 100% to the Angel. A bamboo pen (Mekugi) holds handle and Angel together. As with the historical originals this is conical.
Butt end (Kashira) and grip ferrule (fuchi) are made of iron, covered with simple, but elegant, high-gloss black lacquer. Also iron is the tsuba, which was not cast, but made by hand. It shows a Japanese temple with Cherry blossom (Sakura no Hana) in the foreground. Ornamental rate (Menuki) with silver plated bronze offer a nice contrast to the dark winding handle (Tsuka-Maki) and underline the graceful picture.
Both the handle (Tsuka), as well as the vagina (Saya) Jakwood dried was used. In addition to the excellent strength properties, it is also because of its low acid fraction as starting material because it does not damage the blade. Was painted the vagina in glossy black, the so-called Kuroro style. Vaginal opening (Koiguchi), eye (kurigata) and vaginal degree (Kojiri) are made of water buffalo horn and were adapted in most elaborate handwork. The front part of the sheath (saya) is also surrounded by Roche skin. This was sanded and painted over later. The result is a smooth surface with a unique look. The scabbard (saya) is made individually for each blade individually and ensures absolute fit. With light pressure allows the blade detached from the vagina, but it certainly holds otherwise.
The blade is made of steel mono (1075er carbon steel, not stainless), but hardened differentiated. Under traditional Lehmbestrich this was differentiated to 60 HRC on the edge and about 40 HRC hardened at the back of the blade. Directly onto the blade, the blade collar (habaki) was forged silver-plated copper. Only in this way is possible the fuller play to the Tsuba and to guarantee a perfect fit. Through the skills of the polisher the masterful work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result.
As each sword is unique, dimensions and weight may vary. Delivery without sword stand

is mono steel (1075er carbon), but hardened differentiated:
Citadel Katana Yushu
The name Yushu (dt. "Perfection") carries this sword to right. The many intricate details make it a work of art of the highest class.
Butt end (Kashira) and grip ferrule (fuchi) are made of iron, covered with simple, but elegant, high-gloss black lacquer. Also iron is the tsuba, which is not cast, but made by hand. It shows a Japanese temple with Cherry blossom (Sakura no Hana) in the foreground. Ornamental rate (Menuki) with silver plated bronze offer a nice contrast to the dark winding handle (Tsuka-Maki) and underline the graceful picture.
- Sword in shinogi-zukuri style with groove (Bo-Hi).
- Situated Schmiedetes, the groove adapted Habaki silver-plated, engraved copper.
- Seppa silver-plated brass.
- Handle of black Japanese silk winding in Katate Maki style (war winding).
- Black, high-gloss lacquered scabbard with built-in ray skin (Same Kuroro style).
The razor sharp blades are made of 1075 carbon steel. Under traditional Lehmbestrich these are differentiated to approximately 60 HRC at the cutting edge and approximately 40 HRC hardened at the back of the blade. Through the skills of the polisher the masterful work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result.
For each sword belongs next to a production certificate, a quality sword bag and a padded Cordura bag for transport.
Handle length 28.5 cm
Blade length 74 cm
Total length (without scabbard) 102.5 cm
Weight (without scabbard) 1050 g

Made in Cambodia.

Citadel Keshi Wakizashi
by Citadel

#6010348

Citadel Keshi Wakizashi by Citadel

Citadel stands for superior quality, which can only be achieved by a masterly hand. All knives and swords are almost entirely made by hand. Minor variations in size and shape are the result of individual single production.

Keshi in German means "poppy", which is the subject of this sword. The Tsuba is blackened iron from the leaves of the poppy. Fuchi, Kashira and Menuki show the unique flowers. Another highlight is the handle wrapped in brown leather, which is wound tightly related to the ray skin handle.

Financial Statements (Kurigata, Kojiri, Koiguchi) from buffalo horn adorn the black, high gloss lacquered scabbard.

The razor-sharp blade is made of 1075 carbon steel. Under traditional Lehmbestrich this distinction was approximately 60 HRC at the cutting edge and around 40 HRC hardened at the back of the blade. A fuller (Bo-Hi), which also shows in the blacksmith ended up Habiki, reduces weight and provides an optimal balance. Due to the skills of the polisher masterful work of the blacksmith comes fully to bear and presents a beautiful hamon.

For each sword belongs next to a production certificate, a quality sword bag, a Sageo from silk, as well as a padded Cordura bag for transport.

Bamboo-Katana
by Citadel

#605712

Bamboo-Katana by Citadel

.

Fudoshin Samurai Suit
by Jean Fuentes

#651013

Fudoshin Samurai Suit by Jean Fuentes

The suit of armour is delivered in a black transport box which serves as a wooden base. This suit of armour can be drawn! Weight: 50.7 lbs.

John Lee Kappa Katana
by John Lee

#606110

John Lee Kappa Katana by John Lee

As Kappa (to German "river child") refers to a mythical creature of Japanese mythology. It is a water goblin, the people who come too close to its waters, tearing into the depths and drowned. But according to legend, they should have a weakness for pickles.

On its hand crafted decorative rates this extraordinary Katana shows a Kappa, and one unsuspecting hikers. Of particular note is next to the beautiful colors and the flute, which begins only about 10 cm above the tsuba.

- Sharp ausgeschliffene Damascus from 12 times folded 1045 carbon steel with more than 8,000 locations
- Sword in shinogi-zukuri style with stepped groove (Bo-Hi)
- Grip winding of red cotton classic Hineri Maki style
- Black, high-gloss lacquered scabbard (Kuroro-style) of wood
- With a long tang which with two bamboo pins (Mekugi) is fixed in the handle, the sword is thus fully separable
- No plastic, it only high-quality, authentic materials are used
- Blade collar (habaki) and washers (Seppa) are made of brass
- The traditional winding handle is highlighted with authentic ray skin
- All trim rate (Tsuba, Fuchi, Menuki, Kashira) are handmade from metal
- Supplied with protective cover made of fabric
- Each original John Lee sword is a seal and a certificate in

Katsumoto Katana
by John Lee

#605306

Katsumoto Katana by John Lee

Gerfertigt after Museum templates.

The sharply-carved blade of the sword (not stainless) is hand forged from 1095 carbon steel and was provided with a chamfer (Bo-Hi) to reduce weight

Traditional, sophisticated hardening of the blade with clay be stroke, creating a real, beautiful Hamon line. It is for cutting test suitable, by 60° Rockwell at the cutting edge, 40° on the back of the blade.

Blade in the Hon Sanmei built cross section (see figure)

Tsuba iron shows a Samurai handle (Tsuka) made of wood, coated with real, blackened fish skin (same), grip tight, winding made of black cotton, traditionally placed in the Katate Maki - style (war winding).

Blade clamp (Habaki) made of brass, sword fishing especially for holding and fixed with 2 bamboo rods (Mekugi) in the handle.

Scabbard made of wood, decorated with high-quality Sageo (winding). The sword is supplied with certificate which guarantees the authenticity. The delivery takes place in a wooden collector's box with a rack.

Dimensions and Gewichtsangeaben:

Blade length-Tsuba (Nagasa): 77.0 cm
Overall length: 109.5 cm
Total length with sheath: 113.0 cm
Handle length: 32.0 cm
Curvature (sori): 2.7 cm
Focus: approx. 13 cm above the Tsuba
Habaki blade width: 3.0 cm
Blade width at transition to the tip (Kisaki): 2,0 cm
Blade thickness: 0.75 cm
Scabbard weight: 1550 g
Weight without scabbard: 1220 g

Made in China.

asiatische+budowaffen katana shinken nihonto handgeschmiedet japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito iaido scharf john lee xwaffen scharfe schwerter damaststahl damaszener

Katana Practical Maga
by Fudoshin

#651310

Katana Practical Maga by Fudoshin

Handgeschmiedet

particularities: hand forged 1095er carbon steel, complex blade typ Soshu Kitae, blade hardness: HRC60, blade back: HRC40, lengh of the blade: 70cm, weight lengh: 102 cm, handle lengh: 27,5 cm, kassan: 8 / 6 mm, total katana: 1380 g, lacquered wood saya, handle is coated with authentic ray skin, handle is traditionally wrapped with cotton and silk thread, blade is razor-sharp, delivery includes katana, saya, cotton sword bag, gloss sword stands, easy cleaning and care kit and wooden box, authenticity certificate, for practical use / cut in training exercise designed

Katana Practical Mégumi
by Fudoshin

#651416

Katana Practical Mégumi by Fudoshin

Handgeschmiedet

Extras:
- Hand forged 1095 carbon steel
- Consuming of blade
- Blade Type soshu Kitae
- Blade: HRC60
- Back of the blade HRC40
- Length of the blade: 68 cm
- Total length: 102 cm
- Kassane: 7 / 4.5 mm
- Katana weight: 1000 g
- Saya weight: 230 g
- Brown lacquered wooden Saya is decorated with genuine mother of pearl
- Handle is coated with authentic ray skin
- Organic wrapping of cotton and silk is traditionally attached
- The sword is sharpened
- Included in delivery: katana, scabbard (saya), cloth sword bag, cleaning and care set, wooden box, and high-sword stand and certificate of authenticity..
- Designed for practical use in training / exercise section

John Lee - Golden Autumn
by John Lee

#605724

John Lee - Golden Autumn by John Lee

Hand forged, hot ausgeschliffene, 12x folded blade of 1095 carbon steel
- Blade assembly in Kobuse style * (Hard sheath steel, soft core)
- Differentiated cured with Lehmbestrich to 60HRC and 40HRC at the edge at the back of the blade
- Ornamental rate (Tsuba, Menuki, Fuchi and Kashira) are handmade and represent an autumn motif
- Grip winding is made of black silk, lined with traditional triangles of paper
(Hishigami), as well as authentic ray skin
- Two conical Mekugi (bamboo pins) connect the long-held tang to the handle
- Black, high-gloss lacquered wood scabbard with integral Roche skin inlay
- The financial statements of the vagina (Koiguchi, kurigata, Kojiri)
are made of genuine buffalo horn
- Supplied in a wooden box with cloth bag, seal and certificate
- Manufactured according to museum originals

Made in China.

Tanto Flores
by Citadel

#6010215

Tanto Flores by Citadel

The Tanto made entirely by hand has a blade made DNH7-carbon steel (not stainless). This is traditionally cured with Lehmbeschichtung and thus has a real hamon line. The cutting edge has a hardness of 60 HRC, the back of the blade about 40 HRC.

The handle is complete with ray skin and wrapped in Japanese silk. The Menuki are made of bronze, in the form of a chrysanthemum.

The black lacquered scabbard holds degrees from buffalo horn.

Katana practical Shirakawa bla ...
by Musashi

#651525

Katana practical Shirakawa black Saya by Musashi

Here you will find the Katana Dragon of Musashi, the blade of the sword was made of 1060 carbon steel differenziall tempered. The Hamon of the sword is authentic in a Midare Gunome pattern. The blade has a blood Groove and is very sharp.
Included: Katana, scabbard (Saya), cloth sword sheath and Musashi Musashi authenticity certificate. Blade: differential gehärteteter 1060 carbon steel Saya: the saya is made of wood with a high-gloss finish, the Koiguchi from Bull's horn. The Sageo is made of black cotton. Tsuka: The Tsuba is made of blackened steel with a dragon motif. The Nakago is secured by two smoked bamboo of Mekugis in the handle. The handle is covered with Stingray skin imitation. The sword can be used for cutting exercises.

John Lee II - Katana Mount Fuj ...
by John Lee

#604644

John Lee II - Katana Mount Fuji by John Lee

Klinge 12-mal gefaltet

This sword comes with a certificate which guarantees the authenticity. It grinded sharp and comes in a coated fabric collector wooden box in which it can be kept surrounded by a fabric cover securely. The wooden handle is traditionally topped with real fish skin. The wooden scabbard is covered with high-gloss lacquer, the tsuba is made of brass and shows pictures of swordsmen and Chubu.
At the cutting edge, the sword has a hardness of 60 HRC and the back of the blade about 45 to 50 HRC. 2 Mekugi. Handle wrapped with cotton tape.
Multi-layer steel (folded blade) is also known as Damascus or Damascus blade, although European and Asian production methods differ slightly from one another. The fine pattern of the individual layers of the multi-folded steel give this product its special charm and are at the same time guarantees a long product life and high product quality.
This made according to museum originals masterpiece of Asian art of sword forging has been made in the traditional manner.

Made in China.

Hand Forged Samurai Sword DAMA ...
by MAGNUM

#543105

Hand Forged Samurai Sword DAMASCUS by MAGNUM

This high-quality sword impresses at first sight! The 71 cm long blade made of 200 layers of hand forged Damascus, the authentic, backed with authentic ray skin handle and the traditional winding make this piece of jewelry into a masterpiece.

In the execution of the sword you could previously recognize the social status of the samurai. The tsuba is decorated with Japanese motifs and has a slightly antique finish on. The subtle Saya is wooden covered with shiny black lacquer.

This sword is sharpened.

Iaito Ohane
by Fudoshin

#651299

Iaito Ohane by Fudoshin

mit schwarzer Tsuba

Particularities:
- Included in delivery are Iaito and sheath(saya)
- blade is made of aluminum alloy
total lengh: 100 cm
handle lengh: 27,5 cm
total weight laito: 820g
handle is coated with authentic ray skin
handle is traditionally wrapped with cotton thread
the blade is held in two bamboo handle Mekugis

the sword is blunt

Our Ohan Iaito is a perfect for both beginners and advanced students of Iaido. It is very easy and quick in learning the technique is helpful. The Ohan has a Bo-Hi and an aesthetically appealing etched hamon. The tsuba is steel. Ohan means: spring / light. The sword is designed for practical use in the normal Iaido training.

Ten Kei Katana
by John Lee

#605307

Ten Kei Katana by John Lee

-The sharply-carved blade of the sword (not stainless) is hand forged from 1095 carbon steel and was provided with a chamfer (Bo-Hi) to reduce weight
-Traditional, sophisticated hardening the blade with clay be stroke, creating a real, beautiful Hamon line
-Cut test suitable for - 60° Rockwell on the vagina, 40° on the back of the blade
-Rebuilt blade Kobus section (see figure)
-Fine, edited by hand fittings (Tsuba, Fuchi, Kashira, Menuki) which were plated with gold and silver
-Handle (Tsuka) made of wood, covered with real, fish skin (same)
-Tight handle wrap in green silk, traditionally in the Katate Maki - style (war winding) attached
-Blade clamp (Habaki) made of brass
-Sword Angel long held and fixed with 2 bamboo rods (Mekugi) in the handle
-Sheath made of wood, decorated with high-quality Sageo (winding)
-With certificate, which guarantees the authenticity
-Manufactured according to Museum template
-Delivery in wooden collectors box incl. stand

Dimensions and weights:

Tsuba (Nagasa) blade length: 71 cm
Total length: 100 cm
Total length with sheath: 104 cm
Handle length: 29 cm
Curvature (sori): 2 cm
Focus: approx. 11 cm above the Tsuba
Habaki blade width: 3.5 cm
Blade width at transition to the tip (Kisaki): 2.5 cm
Blade thickness: 0.75 cm
Scabbard weight: 1310 g
Weight without scabbard: 1045 g

Made in China.

Ninja swords with sheath N730
by Jean Fuentes

#652116

Ninja swords with sheath N730 by Jean Fuentes

The Ninja were recorded as warriors organization who practiced espionage and guerrilla warfare for the first time in the 15th century. The Ninja were hired for jobs that have the Samurai, which were tied to the Bushido, not accepted. The Ninja has been specializing in espionage, murder and infiltration. These tasks had to the Ninja warriors have a cool head, the ability to adapt and be able to rely on his arms. It was the ingenuity of the Ninjas, the certain about survival.

- Blade: 440 stainless steel - a cut along the blade reduces the weight of the leaves, blows can be performed faster. The swords are easily sharpened.
- Handle: The handle is made of steel with a winding made of cotton
- Sheath: The sheath of the sword is made of black nylon with adjustable shoulder strap. Snap fuses secure the swords in the scabbard.
- Total length: 69 cm
- Blade length: 50 cm
- Length: 18 cm
. - Total weight of both swords including scabbard: 938 g

Includes: 2 swords and Saya.

asiatische+budowaffen ninjutsu ninja japanische+schwerter schwert samurai samuraischwert samuraischwerter ninjato xwaffen

John Lee Kei Ben Iaito
by John Lee

#605310

John Lee Kei Ben Iaito by John Lee

The lai-do sports deals with the art of sword drawing and fixed attack techniques (kata), however as a formal exercise. This uses usually the Iaito, a blunt practice sword. The development of the unity of body, mind, and sword (Ki-Ken-Tai-ichi) is in the foreground. The highest degree of master unless you know any combat situation without having to pull the sword ever achieved. Kei-Ben stands for the simple and practical design of the sword. Masterpiece of Asian art of the silversmith.

The blade is made of stainless steel, hand-forged and hardened.
-The blade is dull and provided with a chamfer (Bo-Hi).
-The handle (Tsuka) is made of wood and with real blackened fish skin (same).
-The handle wrap (Tsuka-ITO) is traditionally made from cotton.
-The Tsuba cast zinc aluminium shows a floral motif.
-On the handle, two Menukis in the form of Mitsudomoe are inserted.
-The scabbard (Saya) is made of wood.
-The blade clamp (Habaki) is made of brass.
-With certificate and seal, which guarantees the authenticity
-Made after Museum templates

-Tsuba blade length 73.5 cm
-Total length without scabbard 101 cm
-Blade bending 19 mm
-Blade back width 5-6 mm
-Max blades width 30 mm
-Weight without scabbard 1100 g
-Weight with sheath 1350 g. Fuchi and Kashira are made of cast metal, the Menuki and the Shitodome are made of brass.


Made in China.

Dragon Wakizashi
by John Lee

#6010107

Dragon Wakizashi by John Lee

The tsuba of this remarkable sword formed a dragon surrounded the sword. The other ornamental rate show the mystical mythical creatures.

- Dull blade in shinogi-zukuri style with groove (Bo-Hi), hand forged from 1045 carbon steel
- Grip winding black cotton classic Hineri Maki style
- Black, high-gloss lacquered scabbard (Kuroro-style) of wood
- Supplied with protective cover in fabric and in an attractive collector's box

Katana practical Sora 100_K994 ...

#652221

Katana practical Sora 100_K9948

The Katana practical Sora is an entry-level model for practical use. It is designed to cut without any problems of tatami. The saya is glossy black with a Buffalo Horn Koiguchi. The sword has a good presence in the wings and is a perfect piece for the daily practice in the Dojo, and when cutting.

The blade steel is folded from 1070 (3200 layers) and has hundreds of layers, which are beautifully visible. The blade is hardened with a double imitation Hamon. The blade has a long or O-kissaki tip. The saya has a gloss black finish with Buffalo Horn Koiguchi. A black Deluxe synthetic Sageo was bound along the saya. The Habaki is made of brass with a crossed pattern of springs. The Seppa is made of brass. The Tsuba is made of iron with Sakura Sukashi snippets and filled copper Centre. The Fuchi and Kashira are made of alloys and have a structured vine motif. The handle is wrapped with black synthetic (ITO) closely about white Samegawa Hineri Maki style. The Menukis are made of alloy as Pentecostal Rosenblatt.


Blade material: 1070 steel, folded (3200 layers)
Blade is sharp
-Gesamtlänge: 103 cm
Length blade - Nagasa length: 71.5 cm / 72.5 cm with Habaki
Length handle: 26 cm
Blade geometry: Shinogi Zukuri
-Balance point: 14 cm
Weight incl. Saya: 1356 g
Weight without Saya: 1084 g
Tsuba material: Iron
-Blade polishing: hand mirror polishing with Japanese Waterstones
-for cutting exercises (Tameshigiri)

Details on the Tsuka or Menuki are easy to recognize in the detail photos. Around the noble swords for explanation, see.

Scope of delivery: Katana, Saya.

Katana Practical Shirasaya Chi
by Fudoshin

#651053

Katana Practical Shirasaya Chi by Fudoshin

Handgeschmiedet

handmade - folded Damast Blade, blade lenght: 27.56, total lenght: 39.97, weight Saya: 14.81 oz, total weight: 31.75 oz, lacquered wooden Saya (scabbard), blade is razor-sharp

Katana Practical Rei
by Fudoshin

#651309

Katana Practical Rei by Fudoshin

Handgeschmiedet

Besonderheiten:
- von Hand geschmiedeter 1095er Kohlenstoffstahl
- aufwendiger Klingentyp Soshu Kitae
- Klingenhärte: HRC60
- Klingenrücken: HRC40
- Länge der Klinge: 68 cm
- Gesamtlänge: 102 cm
- Kassane: 7/4,5 mm
- Gesamtgewicht Katana: 1230 g
- braun lackierte Holz Saya, verziert mit echtem Perlmutt
- Griff ist mit echter Rochenhaut belegt
- Griffumwicklung aus Baumwolle und Seide ist traditionell angebracht
- das Schwert ist scharf geschliffen
- Lieferumfang: Katana, Scheide (Saya), Stoffschwerthülle, Hochglanz-Schwertständer, Reinigungs- und Pflegeset und Holzbox, Echtheitszertifikat.
- zum praktischen Gebrauch/Schnittübung im Training konzipiert

asiatische+budowaffen katana shinken nihonto handgeschmiedet soshu kitae fudoshin japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito scharf

Ten Kei-Wakizashi
by John Lee

#605720

Ten Kei-Wakizashi by John Lee

Blade with groove (Bo-Hi) from 1095 carbon steel (not stainless) hand forged.
made in Kobuse-style, traditionally cured with Lehmbestrich
- Real hamon
- 60 HRC at vagina
- 40 HRC on the back
- Blade collar (habaki) brass
Fittings (Tsuba, Fuchi, Menuki, Kashira) handmade, finished with gold and silver.
Handle wrapped in Katate Maki style (war winding) of silk, lined with
authentic ray skin
Fixed blade with 2 wooden dowels (Mekugi) under control
Delivery in wooden box

Made in China.

Practical katana Yoma
by Fudoshin

#651305

Practical katana Yoma by Fudoshin

Handgeschmiedet

particularities: hand forged 1095er carbon steel, blade typ Maru, blade hardness: HRC60, blade back:HRC40, blade lengh: 72,5 cm, total lengh 104 cm, weight katana: 1500 g, lacquered wooden Saya, handle is coated with authentic ray skin, handle is traditionally wrapped with cotton and silk thread, blade is razor-sharp, Delivery includes Katana, Saya, cotton sword bag, gloss sword stands, easy cleaning and care kit and woodent box, authenticity certificate, for practical use / cut in training exercise designed

Tanto Fudoshin Zatoichi
by Fudoshin

#651009

Tanto Fudoshin Zatoichi by Fudoshin

Handgeschmiedet

hand forged 1095 carbon steel, blade type Maru, blade: HRC60, blade back: HRC40, blade lenght: 9.45, total lenght: 15.35, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton thread, blade is razor-sharp

John Lee III - Dragon Katana
by John Lee

#604653

John Lee III - Dragon Katana by John Lee

This sword comes with a certificate which guarantees the authenticity. It grinded sharp and comes in a fabric cover. The wooden handle is a tra occupied with real fish skin. The wooden scabbard is covered with high-gloss lacquer and made the tsuba ornate bronze. It is delivered in a
fabric-covered wooden box collector. This sword is removable. The Tsuba can replace. The sword is suitable for training. Made of non-folded steel.

Made in China.

John Lee Waqar Katana
by John Lee

#6010316

John Lee Waqar Katana by John Lee

Know the colours of Captain John Lee Gunto on.

• Sharp, hand forged blade from 1045 carbon steel (not stainless)
• The Shinogi-Zukuri style blade
• Traditional handle is made of wood with real ray skin layer and lock button
• Handle wrap Brown cotton Hineri Maki style
• Brown lacquered wooden scabbard
• High-quality, two-coloured Sageo
• Is delivered in an attractive collector's box
• Made after historical models
• Each original John Lee loves a seal as well as a certificate in

Waqar is the Japanese military sword. At the end of the 19th century was the design of the French military Sabre.

To bring the spirit of the Samurai code of honor (Bushido) forces, it was decided in 1934 to a, the Katana inspired look. The swords of the ordinary soldiers were usually industrially manufactured and therefore simple quality.

However, senior military swords were often equipped with traditional blades from the family heritage. The rank of an officer was seen in the colors of the Sageos. In contrast to the Katana, the Sageo was mounted at the handle end of the Waqar.

John Lee - MUSASHI ICHI Wakiza ...
by John Lee

#605136

John Lee - MUSASHI ICHI Wakizashi by John Lee

handgeschmiedet und traditionell gehärtet

Miyamato Musashi has gone down as one of the most impressive samurai in Japanese history, and lived from 1584 and 1645, he is referred to as the best swordsman in Japan. He was an artist and craftsman at the same time. Unforgettable is his creation of a school for the stitch blade manufacturing (tsuba). His best-known, very simple tsuba consists of two oval rings.
The blades of the swords are hand forged from carbon steel and hardened in traditional style with fine harmony line. The sharp ground out blades were provided for weight reduction with a Bo-hi (channel). The handles (tsuka) are made of wood and are equipped with real fish skin (Same) occupied. The handle wrap (Tsuka-Ito) is traditionally mounted from black Baumwole. On handle two Menukis are inserted. The sword fishing are particularly long and held with two bamboo pins (Mekugi) mounted in the handle. The sheath (saya) is made of wood. The blade collar (habaki) are made of brass and were manufactured by museum originals.
Each sword comes with a seal, which guarantees authenticity. You get every sword in a cloth bag and a high quality collector wooden cassette.
This made according to museum originals masterpiece of Asian art of sword forging has been made in the traditional manner.

Made in China.

Ninja sword command
by Fudoshin

#651078

Ninja sword command by Fudoshin

of hand forged 1095 carbon steel
Blade Type Maru (Black Blade)
Blade: HRC60
Back of the blade: HRC40
Length of the blade: 73 cm
Overall length: 106 cm
lacquered saya
Handle is coated with authentic ray skin
Organic wrapping of cotton is traditionally attached
the sword is sharpened
including a mateable blowgun with 10 arrows
- The sword is for practical use (eg cutting exercises) designed in Training

Commando sword, black blade

#601516

Commando sword, black blade

420s stainless high-grade steel. Solidly made of one piece and sharpened. A combination Kydexscabbard which permits to carry this sword at the back, belt or at the leg is contained in the scope of supply.

Those swords come from the foundry VERY sharp. Caution when first handling is mandatory.

Katana Practical Teki
by Fudoshin

#651311

Katana Practical Teki by Fudoshin

Handgeschmiedet

particularities: hand forged 1095er carbon steel, complex blade typ Soshu Kitae, blade hardness: HRC60, blade back: HRC40, lengh of the blade: 70cm, weight lengh: 102 cm, handle lengh: 27,5 cm, kassan: 8 / 6 mm, total katana: 1340 g, black lacquered wood saya, handle is coated with authentic ray skin, handle is traditionally wrapped with cotton, blade is razor-sharp, delivery includes katana, saya, cotton sword bag, gloss sword stands, easy cleaning and care kit and wooden box, authenticity certificate, for practical use / cut in training exercise designed

Ten Kei Tanto
by John Lee

#6010302

Ten Kei Tanto by John Lee

The term "Ten Kei" can be translated as "gift from heaven", and stands as a symbol of the beauty of nature. Thus inspired, fine floral motifs are reflected in the hand-crafted, finished with gold and silver mountings again.

The blade is forged by hand in elaborate Kobuse style. Here, surrounded by a hard shell made of 1095 carbon steel a core of softer, low carbon steel.

Like its historic predecessor also connects this Tanto grace and benefits in a unique way.

The curing is differentiated to about 60 ° Rockwell to the edge and about 40 ° Rockwell at the back of the blade. Visible is the hardness difference in a genuine, finely worked out Hamon line.

- Sword in shinogi-zukuri style with chamfer
- Blade assembly in Kobuse style.
- In Aikuchi style, traditionally without hilt (tsuba)
- Grip winding of green silk in Hineri Maki style (war winding)
- Backed by Roche skin.
- Black, high-gloss lacquered scabbard (Kuroro style) with degrees (Kojiri, kurigata, Koiguchi) from buffalo horn
- Blade collar (habaki) and washers (Seppa) are made of brass.
- Is fixed with long tang which with two bamboo pins (Mekugi) under control
- Tanto is thus fully separable
- All trim rate (Fuchi, Menuki, Kashira) are handmade from metal and give each sword his personal touch.
- Supplied in a wooden box.
- Each original John Lee sword is a seal and a certificate.

Weapons Bag Universal
by Budoten

#551503

Weapons Bag Universal by Budoten

Beautiful weapons carrying bag with about 110 cm total length, outer material washable synthetic leather, lined inside and padded.

With adjustable strap, suitable as a handle or shoulder strap as.

Red Samurai
by MAGNUM

#543104

Red Samurai by MAGNUM

Inexpensive Dekoartionskatana. A true premium sword. The traditional grip, the white, rochehaut-like pad that Menukis and the two Mekugis, fix the blade in the handle, are just some of the strong features of this masterful sword. The hand forged blade of 1045 carbon steel is sharpened and is separated from the decoratively designed Tsuba from the handle. The tsuba is two fighting Samurai. The slightly antique finish makes the sword look even more authentic. This sword can be dismantled.

Hannya Katana
by John Lee

#605446

Hannya Katana by John Lee

- Sharp blade hand forged 1095 carbon steel (not stainless)
- Differentiating with Lehmbestrich hardened, real hamon
- Suitable for cutting tests, 60 HRC at the cutting edge, HRC 40 on the back
- Blade collar (habaki) brass tsuba, zinc-aluminum cast
- Winding handle made of black cotton, lined with authentic ray skin
Fixed blade with 2 wooden dowels (Mekugi) under control -
- Matt lacquered scabbard
- Delivery in collector with fabric bag


The Hannya mask dates back to the
Japanese Noh theater and probably
be the most famous mask at all.
It stands for the woman in front of anger and
Jealousy has turned into a demon.

Made in China.

Practical Iaito Musashi
by Fudoshin

#651297

Practical Iaito Musashi by Fudoshin

particularities:
- Blade is made of carbon steel
- total lengh: 99 cm
- blade lengh: 71 cm
- handle lengh: 27,5 cm
- total weight laito: 1190 g
- lacquered wooden saya
- handle is coated with authentic ray skin
- handle is traditionally wrapped with cotton thread
- the blade is held in two bamboo handle Mekugis
- the sword is blunt
- The sword is designed for practical use in the normal Iaido training.

Maintenance kit for Samurai sw ...

#601588

Maintenance kit for Samurai swords

mit dekorativer Holzkiste

Set for cleaning and maintenance of high quality blades. Cleaning should be done in a humid climate every two weeks in dry climates once a month. The purification of a katana is a ceremony and symbolic means at the Samurai, the purification of the soul. A samurai sword wont be for a lifetime.

asian+budoweapon swordpflege swordset japanese+swords accessories

Katana Super Bitch in pink K99 ...
by ONIKIRI

#651835

Katana Super Bitch in pink K9970 by ONIKIRI

Katana Super Bitch pink in color - the modern version of a traditional Katana and a great gift idea!

- Hand forged 1045 carbon steel
- Blade Type Maru
- Length of the blade: 72 cm
- Total length: 103 cm
- Total weight Katana: 1105 g
- Saya weight: 234 g
- Lacquered wooden Saya
- Handle is coated with authentic ray skin
- Organic wrapping of cotton and silk is traditionally attached
- The sword is sharpened
- The tang is 2 Mekugi held and secured in the handle
- Manufacturer: Onikri

For details on the Tsuka Menuki or are very easy to see on the photos for. Definitions around the noble swords, see About.

Included: katana, scabbard (saya), sword cloth bag and certificate of authenticity.

asiatische+budowaffen katana shinken nihonto handgeschmiedet maru fudoshin japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito scharf

Katana Practical Choukin
by Fudoshin

#651036

Katana Practical Choukin by Fudoshin

Handgeschmiedet

hand forged 1045 carbon steel, blade type Maru, blade: HRC60, blade back: HRC40, blade lenght: 27.16, total lenght: 49.76, weight Katana: 34.92 oz, weight Saya: 11.29 oz, blade back: 0.28/0.20 oz, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton and silk thread, blade is razor-sharp

Half-Handmade Samurai Sword

#605127

Half-Handmade Samurai Sword

Our blacksmith called this sword as a "Half-Handmade". This means that the forged blade is ground carefully sharp carbon steel on modern machines. The blade surface is polished by hand and has a fine structure. The back of the blade with 7 mm thickness corresponds to old originals. The Rockwell hardness of the blade is about 50 degrees. The sword has a very handy and long handle, which is made of wood, as well as the traditional applied by hand winding. A strong and on both sides elaborately decorated tsuba and scabbard paint from wood (high gloss finishes) complete this sword. The sword is not suitable for cutting tests. The blade is ground, suitable for Kata exercises.

Made in China. Without certificate, made about 5 years ago

Samurai premium damask
by MAGNUM

#5455189

Samurai premium damask by MAGNUM

The myth of forged samurai swords is legendary.

In addition to the Samurai premium series presents Böker an exclusive Katana, which the collector's heart beat faster.

The forging process, each blade receives their individual character. The handle is secured with genuine Ray skin and then artfully wrapped. The clean lacquered wooden scabbard fits the color of the handle wrap. Tsuba and fittings are in antique brass.

The sword in a traditional wooden box which is lined with Asian materials is delivered. Preserve the value of your collector piece also, a tote bag and an original cleaning and care set is the sword.

80 layers hand forged Damascus Steel-carbon steel give this luxury Katana his extraordinary charisma. A vision, one which can no longer escape.

Akito
by MAGNUM

#5454732

Akito by MAGNUM

Real function sword. Well suited not only for katas (forms of exercise) or for Iaito (pull exercises), but also for Temeshigiri (cutting tests).

To perform cutting test, requires a particularly high quality, sharp and cutting containing blade. The blade of the Akito is made of clay-tempered 1045 carbon steel, with real Hamon (temper line).

The overall design is particularly robust, in order to avoid injuries. So the blade is continuously almost until the end of the handle and is held in place by two Mekugis. The function sword with a beautiful painted wooden sheath together with traditional eye (Kurigata and shito-Dome) is delivered.

Katana Practical Zatoichi
by Fudoshin

#651031

Katana Practical Zatoichi by Fudoshin

Handgeschmiedet

hand forged 1045 carbon steel, blade type Maru, blade: HRC60, blade back: HRC40, blade lenght: 28.34, total lenght: 41.73, blade back: 2.36/1.97, weight Katana: 27.51 oz, weight Saya: 13.75 oz, matt lacquered wooden Saya (scabbard), blade is razor-sharp

John Lee I - Katana Musashi I ...
by John Lee

#604645

John Lee I - Katana Musashi Ichi by John Lee

The sword includes a certificate proofing the authenticity. It is sharpend and delivered in a decorative wooden, fabric covered collectors box where it may be stored in the included fabric wrapper. The handle (tsuka) is made of wood and covered in real fish skin (same). The saya is made of wood and covered with mirrorfinish lacquer.

The tsuba is made of casted iron in the traditional double ring form which is said to route back to Miyamoto Musashi. Museum originals had been the source for this masterpiece of asian swordcraft.

The hardness is approx. 50 to 52 degrees rockwell. Since the cutting edge thinner, it cools down faster then the thicker sword back so it will be harder. The softer, less hardened sword back guarantees the necessary flexibility of the blade. The blade has a brass collar (habaki) so it won't rattle in the scabbard.

asiatische+budowaffen katana shinken nihonto handgeschmiedet japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito iaido scharf john lee xwaffen scharfe schwerter damaststahl damaszener

John Lee Shirasaya Katana blac ...
by John Lee

#606109

John Lee Shirasaya Katana black by John Lee

As Shirasaya refers to a special sword mount, which was formerly used for gentle storage of the blade. Especially in times of peace, the blades were kept therein for optimum protection. The unpainted Magnolia wood absorbs the moisture inside the vagina on, it leads to the outside and thus protects the blade from rust.

Many Shirasaya were provided with a "Sayagaki", an inscription, which gave information about smith, origin and classification. On the streets of Japan, the inconspicuous outfit was no handle and hilt especially towards the end of the 19th century use.

At that time, the guiding Samurai swords was prohibited by the Emperor. The Shirasaya mount, which looked very similar to a wooden sword and wooden stick, was a clever way yet unnoticed to carry the sword.

- Sword in shinogi-zukuri style with groove (Bo-Hi), hand forged from 1045 carbon steel
- The blade is sharpened with incorporated Hamon-line for a very authentic look.

Goemon Practical Katana
by John Lee

#6010108

Goemon Practical Katana by John Lee

Ishikawa Goemon (* 16th century - + August 10, 1594) is a Japanese folk hero. Much like Robin Hood, he is said to have robbed the rich and given to the poor.

Even today there are many myths and legends about him, such as the failed assassination attempt on Toyotomi Hideyoshi, after which he was sentenced with other members, and executed them alive in boiling oil.

Heroic he should have while still trying to save his son by keeping him out of the boiler.

The John Lee Goemon Katana addresses this issue. The tsuba shows, among other Goemon when he was executed by a wood engraving by Toyokuni Ichiyoai. Among other designs also his name is found on the Fuchi in Japanese characters.

- Sharp blade of 9260 carbon spring steel (not stainless), suitable for cutting tests
- Sword in Unokubi-zukuri style
- Hand-painted Tsuba with traditional woodcut art
- Grip winding brown suede, lined with blackened Roche skin
- Black, high-gloss lacquered scabbard with degrees from buffalo horn
- High-quality, two-colored sageo
- Supplied with protective cover in fabric and in an attractive collector's box

47 Ronin Katana
by John Lee

#6010303

47 Ronin Katana by John Lee

Product features include:

- Sharp, hand forged blade of 9260 carbon spring steel (not stainless), suitable for cutting tests (about 55 HRC).
- Blade in the Shobu-zukuri style.
- Handle of wood, with authentic ray skin inlay.
- Grip winding black leather classic Hineri Maki style.
- Black, high gloss lacquered wooden scabbard (Kuroro style) with degrees from (Kojiri, kurigata, Koiguchi) from buffalo horn.
- High-quality, two-colored sageo.
- Supplied in an attractive collector's box.
- Manufactured according to historical models.

Beginning of the 18th century were the two princes Kamei Korechika and Asano Naganori from Shogun commissioned to prepare a reception ceremony for the envoys of the emperor.

Dependence were the two on the corrupt ceremony champion Kira Kozuke who should teach in terms of courtly etiquette. This expected however this generous gifts and offerings. Unlike Kamei Asano refused this, whereupon he was from the ceremony master particularly ill-informed, insulted and provoked.

After some time of Erduldens Asano finally burst the collar and he attacked Kira with his knife. Although he was injured this only slightly, stood on this offense the death penalty and Asano committed seppuku, the ritual suicide.

Under Asano's followers there were 47 Samurai, which were by the death Ronin (masterless samurai). Although they knew that the blood revenge would mean the own death, she devised a plan to the ceremony master to murder. After months of preparation did you manage to finally break into Kira's property to execute him and then remove him on the head.

After they had laid his head down on Asano's grave, the Ronin revealed. Since they had avenged their master and thus acted within the code of honor of the samurai, the shogun allowed to commit suicide by seppuku, which they were not executed as ordinary criminals. This event is an outstanding example of the unconditional loyalty and fidelity of the samurai against their Lord.

The John Lee 47 Ronin Katana is designed to reflect the strength and loyalty of the masterless samurai.

Katana und Wakizashi Practical ...
by Fudoshin

#651043

Katana und Wakizashi Practical Koroki by Fudoshin

Handgeschmiedet

hand forged 1095 carbon steel, blade type Maru, blades: HRC60, blades back: HRC40, blade lenght Wakizashi:, total lenght Wakizashi: blade lenght Katana: 26.77, total lenght Katana: 40.95, total weight Katana: 42.33 oz, weight Saya: 3.53 oz, total weight Wakizashi: 35.28 oz, lacquered wooden Sayas (scabbard), handles are coated with authentic ray skin, handles are traditionally wrapped with cotton thread, blades are razor-sharp

Magnum Iaito Sword
by MAGNUM

#542696

Magnum Iaito Sword by MAGNUM

The extremely stable construction and far-reaching in the blade grip offer a very high functional value. The blade is held by two Mekugis grip. The traditionally wrapped handle is highlighted with authentic ray skin and with two menuki, a thoroughly authentic battle sword. The round tsuba is provided with very decorative perforations to achieve a perfect balance. The sword is not suited for battle blade against blade.
The Iaito has the following individual components:
Tsuka: Cotton
Menuki: Bronze
Habaki: Brass
Tsuba: pressure-cast
Mekugi: Wood
Saya: Wood

Samurai sword set zombie dead
by Haller Zombie De ...

#6010153

Samurai sword set zombie dead by Haller Zombie Dead

The blades are made of carbon steel (not stainless) and black coated. With sheaths made of wood, painted black.

Katana: blade length approx.: 69.0 cm, total length approx.: 98.0 cm
Wakizashi: blade length approx.: 50.0 cm, total length approx.: 74.0 cm

The zombie boom is not stopping!
Long ago, the undead drive well beyond Halloween mischief.
"World War Z", "the walking dead", "Dead Space" or "Resident Evil" are just a few examples, lets the entertainment industry that resurrects the myth of "Zombie".

In the knife line DEAD HALLER ZOMBIE are finding numerous Verteidungsmöglichkeiten against zombies.

Whether blades failed to prepare the Apocalypse, or for fans, HALLER ZD - impression and a sharp article anyway!

Blind Samurai
by MAGNUM

#543110

Blind Samurai by MAGNUM

This sword belonged to a blind wanderer. A peaceful living man, but he is in danger, is his sword for him. Through his courage and skill he overcomes his enemies. His sword comes out without Tsuba and reminds the style of a Shirasaya. On one side of the handle two inconspicuous notches are attached by its wearer always knows in which direction does the cutting. The blade made of 1045 carbon steel is kept straight and not traditional curved. Handle and sheath are made of wood and are painted elaborately. The sword is not battle ready. There is ground, characterized in injury. It is intended for decorative purposes.

Transporttasche Katana Munetos ...
by Jean Fuentes

#651964

Transporttasche Katana Munetoshi F26 by Jean Fuentes

Transporttasche für alle Arten von Katanas. Die Tasche ist groß genug, um mehrere Schwerter zu transportieren. Sie ist aus strapazierfähigem schwarzen Nylon und einem verstärktem Boden aus Wildleder konstruiert.

- Farbe: schwarz
- Material: Nylon
- mit Reißverschluss
- mit 2 Innentaschen (88 cm lang, 15 cm breit), verschließbar mittels Reißverschluss
- eine aufgesetzte Tasche mit Reißverschluss auf der Frontseite (22 x 12 x 7 cm)
- Tragegriff
- mit verstellbarem Rückengurt
- das Katana ist nicht enthalten
- Maße (L x Bx H): ca. 128 x 20 x 3 cm

asian+budoweapon swordpflege asian+budoweapontasche japanese+swords swordcover swordwrap

John Lee IV - Katana Golden Fl ...
by John Lee

#604700

John Lee IV - Katana Golden Flower by John Lee

Klinge 12-mal gefaltet

This sword is a masterpiece of Asian blacksmithing, hand forged and hardened in the traditional way. Manufactured according to museum originals. The blade is 12-times folded, provided with Bo-Hi and ground out sharply. The wooden handle is traditionally wrapped occupied with applied Menuki and real fish skin. It is supplied in a high quality collector wooden cassette.
Multi-layer steel (folded blade) is also known as Damascus or Damascus blade, although European and Asian production methods differ slightly from one another. The fine pattern of the individual layers of the multi-folded steel give this product its special charm and are at the same time guarantees a long product life and high product quality.
This made according to museum originals masterpiece of Asian art of sword forging has been made in the traditional manner.

Made in China.

Katana Shirasaya Chouku
by Fudoshin

#651601

Katana Shirasaya Chouku by Fudoshin

This katana is hand forged Shirasaya Chouku with a blade of 1060 carbon steel - Blade Type Maru. The saya is made from wood and fitted with white high gloss lacquer. The blade has a universal hardness and continuous Blurtrille (Bo-Hi). Through the blood groove, the weight of the blade is reduced. The blade is ground completely sharp. The blade of the katana is secured by a piece of brass habaki. The kurigata is wooden with a bright copper ring. On one side of the Saya is an integrated attachment holster for a mini Tanto. The Mini Tanto is made of stainless steel with a patterned steel handle with golden flowers. The Tsuka core is wooden with an imitation of black ray skin (Same). The Angel is secured by two bamboo Mekugis. On each side of the Tsuka are two golden dragon Menuki.

- Handforged
- Material Blade: 1060 Carbon Steel
- Blade Type: Maru
- Blade with blood groove
- Blade to the handle end through
- Length blade: 73 cm
- Length Katana complete: 103 cm
- Weight incl Katana Saya: 1092 g.
- Saya weight: 240 g
- Glossy white lacquered Holzsaya
- Handle with black imitation ray skin (Same) proves winding: off white cord Ito
- Angel is supported by two bamboo Mekugis
- Blade is sharp
- Comes with a Mini Tanto made of stainless steel
- Manufacturer: Musha


Definitions around the noble swords, see About.

Included: katana, scabbard (saya), Katana cloth bag and certificate of authenticity.

Sales only to persons over 18 years. With this acquisition, we will need proof of age.

It is a product of the practical use in training (Cutting) was conceived.

Katana Practical Aka
by Fudoshin

#651050

Katana Practical Aka by Fudoshin

12-Fach-Faltung Handgeschmiedet

handmade - folded Damast Blade, blade lenght: 28.93, total lenght: 40.55, weight Katana: 34.92 oz, weight Saya: 8.47 oz, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton thread, blade is razor-sharp

Katana Practical Rikou
by Fudoshin

#651051

Katana Practical Rikou by Fudoshin

12-Fach-Faltung Handgeschmiedet

handmade - folded Damast Blade, blade lenght: 28.93, total lenght: 40.55, lacquered wooden Saya (scabbard), handle is coated with authentic ray skin, handle is traditionally wrapped with cotton thread, blade is razor-sharp

John Lee - Shintai KATANA
by John Lee

#605132

John Lee - Shintai KATANA by John Lee

handgeschmiedet und traditionell gehärtet, Klinge 12 mal gefaltet

The blades of the swords are hand forged from carbon steel and hardened in the traditional way. The blade is folded 12 times (yields approximately 8,000 positions) and have a beautiful damascene structure. The sharp ground out blades were provided for weight reduction with a Bo-hi (channel). The handles (tsuka) are made of wood and are equipped with real fish skin (Same) occupied. The handle wrap (Tsuka-Ito) is traditionally mounted from black Baumwole. On handle two Menukis are inserted. The sword fishing are particularly long and held with two bamboo pins (Mekugi) mounted in the handle. The sheath (saya) is made of wood. The blade collar (habaki) are made of brass and were manufactured by museum originals.
Shintai are physical objects which play the role of relics in religious sites. They were not conceived in Japanese mythology as places of residence of the gods (kami). The sword is next to mirror and gem (jap. Throne Insignia) a typical Shintai. On the Tsuba Japanese gods are depicted.
Each sword comes with a seal, which guarantees authenticity. You get every sword in a cloth bag and a high quality collector wooden cassette.
Multi-layer steel (folded blade) is also known as Damascus or Damascus blade, although European and Asian production methods differ slightly from one another. The fine pattern of the individual layers of the multi-folded steel give this product its special charm and are at the same time guarantees a long product life and high product quality.
This made according to museum originals masterpiece of Asian art of sword forging has been made in the traditional manner.

Made in China.

Shirasaya Katana
by Ju-Sports

#722004

Shirasaya Katana by Ju-Sports

Fine Wakizashi in a simple wooden scabbard. When decorating very nice. Steel blade sharp.

asiatische+budowaffen katana nihonto shinken schwertset japanische+schwerter schwert samurai samuraischwert samuraischwerter bambus shirasaya einzelset xwaffen

Walking dead: Michonne Katana
by USMC

#5454729

Walking dead: Michonne Katana by USMC

In the third season of the hit series from America is a new character, the sword fighter Michonne, which this impressive sword skillfully leads.

The blade is made from 1045 carbon steel. The typical form of the sword resembles a traditional Katana with a wrapped handle and gold-coloured Menukis. The sheath can be worn on the back and very successfully completes the overall picture of the limited and numbered sword.

With certificate of authenticity.

John Lee - Zaza laito
by John Lee

#605722

John Lee - Zaza laito by John Lee

Zaza is Japanese for bamboo. Due to its straight growth and its fresh, green
Color he stands for growth and purity. In Japanese culture, besides, he is also considered a good luck symbol.
- Hand Forged dull blade 420 stainless steel, with suffix of Hamon-line
- Well-balanced blade, which was provided for weight reduction with a chamfer
- Traditional winding handle made of black cotton, lined with authentic ray skin
- Ornamental rate (Tsuba, Fuchi, Kashira, Menuki) show bamboo motifs
- Black, high-gloss lacquered scabbard also decorated with golden bamboo leaves
- The financial statements of the vagina (Koiguchi, kurigata, Kojiri) are made of genuine buffalo horn
- Delivery in collector with cloth bag, seal and certificate

Made in China.