0 item in shopping cart
Eickhorn KM2000
by Eickhorn
#53825101
Eickhorn KM2000 by Eickhorn
Double sided Tanto blade made of Boehler N695 steel (HRC 57) with black Kalgard coating and half serrated cutting edge. Fiberglas enforced synthetic cross guard. Black synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Comes with diamond sharpener. Overall length 30.2 cm. Blade length 17,2 cm. Blade thickness 5 mm. Total weight 330 g.
Boker Damascus Superior Chef's ...
by Böker
#542940
Boker Damascus Superior Chef's Knife by Böker
For the first time the extraordinary blade of our new Damascus chef knife Superior is a vierbahniger Torsionsdamast with separately forged Damascus cutting bar for use, which the German damascus forger Andreas Henrichs exclusive forged with fascinating precision for Boker.
In an extremely complex process single-layer Damascus steel by hand for differential to a massive square bar. This square is twisted 15 times in itself (twisted), whereby the unique pattern of Torsionsdamasts (300 layers) is formed. Four of these twisted Damaststränge and a fifth strand of not of twisted Lagendamast for the cutter bar are then forge welded to a complex Damastpaket and for differential.
The result of this time-consuming and strenuous manual labor is a blade blank of exceptional structure and unsuspected strength. The orientation of the non-twisted cutting edge ensures a homogeneous clip and ensures superior cutting performance.
This technique of damask originated in Europe and has already been used in the Middle Ages for producing high quality swords for the nobility. Swords with Torsionsdamast were so popular that the Viking raids have survived, in which specially those blades should be captured.
The Damastexperte Andreas Henrichs produced for Boker these exquisite material according to the historical model and provides the raw material for one of the most exclusive and most efficient cutting tools that are today inconceivable in a kitchen. In the Boker knife factory in Solingen the blade blank in over 150 operations is made to the complete diameter of hand.
For the balanced styled grip the African grenadilla hardwood is used, which perfectly harmonizes with its almost black and fine drawing with the fine blade. The high specific gravity of Blackwood provides an excellent balance of the knife. Due to its high oil content, it is also very moisture resistant, making it the first choice in the construction of first-class woodwind instruments. And is bordered by two of the noble wooden handle Damascus steel grips and a pommel, both made from 300 layers of stainless Damascus, which is produced by powder metallurgy. The handle must be individually adjusted by hand to each blade. They support the balance of the knife and put optically accent.
The Boker Damascus Superior combines history and highest Blacksmithing with a particularly fascinating appearance and provides a kind of markup for any aspiring chef. Each of these knife-art carries its own individual serial number to trace the respective production history in the Boker knife factory can. Supply includes a certificate of authenticity and care instructions for the non-stainless damascus in a wooden tray.
The Detail of the blade shows the exact course of four twisted by hand Damastbahnen with the extraordinary, star-like damask pattern. The linear grain of the extremely cut-containing damask cutter bar ensures superior cutting performance of the blade. The result is a work of art - a masterpiece of forging and knife maker-craft the Boker knife factory. The perfectly matched damask handle pieces from more than 300 layers of stainless Damascus steel set with the line form the fine structure of Grenadillholzes elegant and continued to show in the polished the beautiful pattern in the form of annual rings. In practice, they offer the blade a perfect fit and an excellent balance. The pommel is also made of 300 layers of stainless Damascus and sets with the ornate Damastmaserung in the form of annual rings not only a strong visual accent, but also protects the wood handle also effective against damage.
Boker Swiss dagger Torsionsdam ...
by Böker
#542920
Boker Swiss dagger Torsionsdamast by Böker
In the tradition of medieval European Dama's sword-Blacksmithing we present from our Knife Manufactory successful model Swiss dagger in a very exclusive Collector's Edition. Vierbahniger Torsionsdamast, consisting of a nickel-containing and manganese tool steel, forged in a complex and complicated forging process of a blade of perfect symmetry and beauty. Each track consists of a Damastpaket, the first for differential by hand and then fifteen times twisted (twisted in itself) is.
Four of these twisted shape Damaststäbe are then forge welded and forged into the final blade shape. The structure of the layers thus achieved not only guarantees the legendary strength of Damascus, but also produces the distinctive pattern that distinguishes a Torsionsdamast. Blades of Torsionsdamast were in the Middle Ages as the pinnacle of blacksmithing, which could only be afforded by the nobility.
In medieval royal tombs were daggers with multi-web Torsionsdamast found that were given as a special appreciation to the commander or ruler to the grave. This historical and very complex forging process, the master only a few damascus Miede is completed by Andreas Henrichs in perfection and exclusively for Boker. The beautiful shimmering black handle handpicked ebony is bordered by highly polished knob handle and the guard and forms a perfect union with the noble blade.
Designed specially for this model and sewn by hand, decorated leather sheath underlines the exclusivity of this sought-after collector's item. The dagger is equipped with an individual serial number and strictly limited (250 pieces. Europa and 250 pieces. America). Comes with collector certificate in a wooden box.
Böker Damast Superior
by Böker
#542722
Böker Damast Superior by Böker
The extraordinary blade of our new Damascus chef's knife, Superior, is made of a four-band Torsion Damascus and a separately forged Damascus cutting edge, forged exclusively for Boker. This four-sided Damascus band is twisted 15 times in itself, to create a unique pattern of the 300 layers of Torsion Damascus. In our Boker knife manufactory in Solingen, Germany, the blanks are hand made into a complete knife using more than 150 working steps. This technique of Damascus fabrication originated in Europe and was used in the Middle Ages to create high performance sword blades for nobility. The handle is framed by two Damascus bolsters and a Damascus end cap, both manufactured of 300 layers of stainless steel Damascus. The handles are individually hand fitted to the blade, and provide a visual presentation worthy of a piece of art. For the handle, we use African Grenadill wood. The weight of this Grenadill wood provides an excellent balance to the knife. With its high content of oil, it is naturally moisture resistant. The Boker Damascus Superior II is the smaller version of our Torsion Damascus kitchen knife. Get the unique feeling of working with one of the most valuable kitchen tools in a more handy size, especially ideal for paring and peeling.
Eickhorn KM5000
by Eickhorn
#53825138
Eickhorn KM5000 by Eickhorn
Combat Knife KM5000 with highly flexible blade of 55Si7 spring steel. Hollow-ground for better cutting performance and Kalgard coated against corrosion. Carrying system fits MOLLE and IdZ standard. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
Damask Pure Chef Knives
by Böker
#5455046
Damask Pure Chef Knives by Böker
Pure pleasure by cutting a purely function-oriented design. Scandinavian design, clear style, perfect grip.
Stainless steel blade forged from 250 layers of stainless Damascus steel. High quality grips from centuries-old bog oak.
messer+dolche europaeische kuechenmesser kueche küchenmesser kochmesser
Küchenmesserset Damask Olive
by Böker
#543325
Küchenmesserset Damask Olive by Böker
Bestückter Boker Knife Block Olive with seven knives of the series Boker Damascus Olive with a price advantage of 10% compared to a single order. Set consisting of: vegetable knife, paring knife, all purpose knife, small chef's knife, santoku, bread knife, large chef's knife
Citadel Keshi Tanto
by Citadel
#6010349
Citadel Keshi Tanto by Citadel
Citadel stands for superior quality, which can only be achieved by a masterly hand. All knives and swords are almost entirely made by hand. Minor variations in size and shape are the result of individual single production.
Keshi in German means "poppy", which is the subject of this Tanto. Fuchi, Kashira and Menuki show the unique poppy flowers or seed pods. Another highlight is the handle wrapped in brown leather, which is wound tightly related to the ray skin handle.
Financial Statements (Kurigata, Kojiri, Koiguchi) from buffalo horn adorn the black, high gloss lacquered scabbard.
The razor-sharp blade is made of 1075 carbon steel. Under traditional Lehmbestrich this distinction was approximately 60 HRC at the cutting edge and around 40 HRC hardened at the back of the blade. Due to the skills of the polisher masterful work of the blacksmith comes fully to bear and presents a beautiful hamon.
For each article belongs next to a production certificate, a quality sword bag, a black Sageo from silk, as well as a padded Cordura bag for transport.
Compound Abel rifle 30320
by Haller
#6010377
Compound Abel rifle 30320 by Haller
The limbs are fiberglass, the plastic scored shaft and the barrel and the pulleys are in aluminium CNC machined.
Including rifle scope 4 x 32, 4 20 "aluminum arrows, arrow quiver, shoulder strap, clamp and tendons wax.
Eickhorn S.E.K.-M (Marine)
by Eickhorn
#53825113
Eickhorn S.E.K.-M (Marine) by Eickhorn
Special Emergency Knife, designed by Dietmar Pohl. Features: Special dagger blade. Emphasised cross guard on both sides for more safety. 10,5 cm long handle suitable also for use with gloves. Non-slip G-10 scales with rough grip surface. Large holes in the grip improve grip-safety and give better balance. Additional holes for optional safety cord. Solid steel construction made of stainless Boehler N695 steel (HRC 58). Two versions available. Extremely resistant DLC carbon coating (diamond-like-carbon) for sea water environment. Additional micro serration for fishing nets. A Cordura sheath with Kydex lining allows a variety of fastenings (forearm, M.O.L.L.E.).
knives+knifes+daggers pocketknife travellerknife combat fighting camping survival
Küchenmesserset Damask Black
by Böker
#543324
Küchenmesserset Damask Black by Böker
Bestückter Boker Knife Block Black with seven knives Boker Damascus Black Series with a price advantage of 10% compared to a single order. Set consisting of: vegetable knife, paring knife, all purpose knife, small chef's knife, santoku, bread knife, large chef's knife
Forge Knife
by Böker
#5454078
Forge Knife by Böker
Bestückter Boker knife block FORGE with six knives of the series Boker FORGE: paring knife (Art. No. 5,454,076), utility knife (Art. No. 5,454,075), ham knife (Art. No. 5,454,077), Santoku (Art. No. 5,454,073), head diameter ( Art-Nr. 5454072), bread knife (Item no. 5454074)
The price advantage over the single order is 11%
Knife block:
Overall height 22.4 cm, width 19.5 cm, depth 35 cm, Black solid wood (ash) and stainless steel. The blades are secured by strong magnets. Suitable for cooking all types of knives.
Diameter:
Chef knife: Overall length: 34.5 cm Blade length: 20.0 cm Blade thickness: 2.4 mm
Santoku: Overall length: 29.2 cm Blade length: 16.0 cm Blade thickness: 2.5 mm
Bread Knife: Overall length: 36.0 cm Blade length: 22.0 cm Blade thickness: 2.7 mm
Utility knife: Overall length: 22.0 cm Blade length: 11.0 cm Blade thickness: 1.5 mm
Paring Knife: Overall length: 20.0 cm Blade length: 9,0 cm Blade thickness: 1.5 mm
Carving Knife: Overall length: 32.0 cm Blade length: 20.0 cm Blade thickness: 2.5 mm
The stainless steel (chrome-molybdenum-vanadium) forged knives are perfectly balanced and are the ergonomic handle design perfectly in the hand.
Black handles made of special high-quality plastic traditionally associated with three stainless steel rivets permanently and without joints with full-length full tang.
The design of the blade, including the transition to crop allows for easy resharpening and guarantees in combination with proper care (fill in the knife only by hand and not wash in the dishwasher!) Long-term perfect function of the cutter.
Moreover, convinced the series Boker Forge with a very attractive price-performance ratio. Delivery of the knife he follows in a high quality gift packaging.
messer+dolche japanische kuechenmesser kueche küchenmesser hocho messerblock messerset messerständer kochmesser
Pure Damask Santoku
by Böker
#5455047
Pure Damask Santoku by Böker
Pure pleasure by cutting a purely function-oriented design. Scandinavian design, clear style, perfect grip.
Stainless steel blade forged from 250 layers of stainless Damascus steel. High quality grips from centuries-old bog oak.
messer+dolche japanische kuechenmesser kochmesser hocho kueche deba sashimi sushi santoku santuko nakiri useba küchenmesser ajikiri usuba funaki hackmesser usuba damast damastzener
Training knife 29 cm with alum ...
by Budoten
#551206
Training knife 29 cm with aluminum blade by Budoten
With black-white cottonbandwrapping on the handle.
Mathusalem Damascus Cocobolo
by Viper
#5454781
Mathusalem Damascus Cocobolo by Viper
The champagne saber of superlatives for the very fine drops or the special occasions in life.
To create the very impressive and fascinating Blade (33 cm long, 4 cm high and 4 mm thick) by hand, the damask forging of factory Viper from the Northern Italian Maniago have on your overall experience and skills. The blade that is deliberately not sharply honed for the specific purpose of use (not stainless) forged from 200 layers of carbon steel traditional way on an open fire by hand.
The beautifully shaped hand guard together with Parry element also consists of hand-forged 200-ply damask steel and wearing decorative ornaments, which are milled into the steel.
Matching the exclusive blade very finely grained and beautifully polished Cocoboloholz was chosen for the handle. Made from a solid block of wood and ergonomically shaped handle is very comfortable in the hand and allows an absolutely safe and comfortable carrying of the sword.
The handle shells screws made of polished stainless steel, securely connecting blade and handle, as well as a dark red handle cord together with the Quast are particularly decorative. The champagne Saber Mathusalem damask convinced absolutely in form and function.
The champagne Saber limited strictly to world's 200 copies will be supplied in a decorative solid wooden box and certificate of authenticity.
Special run Merlin damask mast ...
by Böker
#5455195
Special run Merlin damask masterpiece by Böker
A real masterpiece, and a real treat for all lovers of exclusive material damask! Damascus steel blades have a long tradition at Boker, and many of our customers appreciate the variety we offer even in this material. With the Merlin damask masterpiece goes Böker yet one step further and offers for the first time a complete Pocket knives, made of forged stainless Damascus's.
Chad Nichols from Mississippi, United States, is best known for the extremely high quality and the absence of the damask steel forged by him. So, its blades are not only a feast for the eyes, but also fully everyday use.
To the Merlin damask really the predicate "100% Damascus" to give masterpiece, has spared Böker trouble, why not only handles and blade are made of damask, but also the spacer in the back of the handle and the blade locking safety clip.
Merlin presents damask masterpiece a further milestone in the series of exclusive collectors knives from the Boker Solingen knife manufactory for the design of the Solingen of knifemaker Wilfried Gorski.
They are delivered with certificate of authenticity in a high-quality and innovative gift packaging.
The knife is made in two strictly limited series by 199 pieces each, one for Europe, one for the United States, with each appropriately coded serial number.
Chef's knife display stand 202 ...
#603837
Chef's knife display stand 20200
Display with 36 Japanese kitchen knives.
Content: 12x20210
12x20214
12x20394
Traditional Japanese cook's knife manufactured in traditional style.
The blades are made of high quality stainless steel and therefore very edge retention. The models Deba and Sashimi are traditionally provided with a flat grind on one side and with a bevel grinding on the other hand, what a much more precise cutting effect.
Manufactured in Japan.
#53299312
Rehwappen Steak set
36 knives and 6 forks, genuine stag handles. Mirror polished stainless metal parts. In jewel case.
Gorm knife set, black
by Böker
#543344
Gorm knife set, black by Böker
Even today are the Vikings for exceptional skills. They were not only courageous and brave sailors and warriors, but also very capable blacksmith. In contrast to the Japanese tradition, inherited the quality blades of the North men not from generation to generation, but lost for posterity by her grave goods at fire and sea burials. Designed by the renowned Knifemaker of Jesper Voxnaes from Denmark, the home of the Vikings, and hand-crafted in the Boker factory in Solingen, the Gorm, named after the first Danish King combines the home of high-quality blades, virtues that are timeless and this knife series to a masterpiece of kitchen instruments will allow. The choice of material is as exceptional as the design. Equipped with extremely cut-containing stainless steel 440 C with a hardness of 58-59 degrees Rockwell, Gorm is vastly superior to conventional kitchen knife blades and is a credit to the Vikings in terms of hardness. The striking hole in the blade you recognise your Gorm knife at first glance. This characteristic feature is not only a striking design element, but also have high functional value. The hole ensures an intuitive and secure execution of the knife if you front attack it like the professional chefs. In addition, it ensures a safe seat with storage in the newly developed knife block. Also on the subject of ergonomic design sets new standards of Gorm. The special shape of the handle is designed for a long, fatigue-free and pleasant feeling of cutting. Also reliably prevents slipping off the edge. The grips consist of specially milled canvas Micarta with its natural looking fabric structure that is not only robust but is also fantastic in the hand. The grip of the Micartaschalen increases significantly with moisture and humidity. Each Gorm knife is an expression of high cuisine culture. So you get your personal Gorm knives with individual serial number and certificate in a high quality gift box.
#53298412
Steak set Series 2
36 knives and 6 forks, genuine stag handles. Stainless metal parts. In jewel case.
messer+dolche küche kueche haushalt besteck tafelbesteck steakmesser steakgabel
#53299412
Table set Series 2
36 knives and 6 forks, genuine stag handles. Stainless metal parts. In jewel case.
#53298012
Steak set Series 3
36 knives and 6 forks, genuine stag handles with nickel silver parts. In jewel case.
#53298512
Steak set Series 4
36 knives and 6 forks, genuine stag handles with nickel silver parts. In jewel case.
#53299012
Table set Series 3
36 knives and 6 forks, genuine stag handles with nickel silver parts. In jewel case.
#53299512
Table set Series 4
36 knives and 6 forks, genuine stag handles with nickel silver parts. In jewel case.
#53299612
Rehwappen Steak set
36 knives and 6 forks, genuine stag handles. Nickel silver butt plate. In jewel case.
BÖKER Tirpitz Damascus
by Böker
#542664
BÖKER Tirpitz Damascus by Böker
Especially for Boker, Norwegian divers have retrieved parts of the special armor of the Tirpitz, from the Fjord. These pieces of living history are being exclusively forged by our Damascus forger to an extraordinary Damascus steel with an exciting background. The pattern Great Pyramids, with more than 300 layers, adorns the mighty 4 blade, and makes this piece the highlight of any collection. The combination of the Tirpitz steel and carbon tool steels also creates an extremely rugged Damascus steel, which has a hardness of 61 HRC, and can handle any cutting task with ease. The handle, made of high strength AlMgSi1 aluminum (with Silicium, making it a much higher quality than standard AlMg3), is hardcoat anodized and provides a firm and secure grip. The reversible clip allows for tip-up or tip-down carry. For the handle inlay we chose domestic walnut, which has a long history as shaft wood for German rifles due to its superior characteristics. This eye-catching inlay also features the original Tirpitz crest. This knife combines history, tradition and modern technology in a more than unique way, and is handmade in the Boker manufacturing facility in Solingen, Germany. Comes complete in a wooden presentation box with a certificate of authenticity, and is serial numbered.
Leopard III Damascus 42 collec ...
by Böker
#5455192
Leopard III Damascus 42 collection by Böker
By Boker Leopard Damascus, the legendary blade steel, which thrills the knife scene worldwide.
The artfully forged blades of the tank gun barrel steel Leopard are true gems in every demanding knife collection. We are glad to open up a new chapter for you. The new Boker Leopard Damascus III collection 42 is now equipped with a pure two-hand operation.
It is refined with an inlay stainless damask steel (180 positions, rose), which is intricately fitted by hand in the grips. The knife is given a completely new look because the powder-metallurgy damask deposit excellently harmonize with the hand-forged Blade (300 layers).
A must for the connoisseur of Leopard Damascus knives. This collector knife is numbered and comes in an elegant wooden box with certificate.
Including to link clip (tip-up/tip-down).
FKMD bellum daga
by FKMD
#544007
FKMD bellum daga by FKMD
Make firewood, food Cook, carve, chop, dig, hammer, lever - if you have nodded approvingly at each of these usage examples, then the bellum daga is definitely the wrong knife for you. But if you are looking for an uncompromising dagger, who makes no secret of his determination, you have found it now.
The slim, double-edged blade with a thickness of 6 mm joins a needle tip. The handle with the G10 skins offers its milled structure grip in both directions.
The pommel is designed as a striker and can be used also defensively.
The dagger had a soul, she would be probably as black as its exterior. Blade steel N690. Complete with elaborate sheath made of Kydex and Cordura for carrying ways. The hardness of the dagger is 58-60 Rockwell.
Eickhorn S.E.K.-M (Marine)
by Eickhorn
#53825114
Eickhorn S.E.K.-M (Marine) by Eickhorn
Special Emergency Knife, designed by Dietmar Pohl. Features: Special dagger blade. Emphasised cross guard on both sides for more safety. 10,5 cm long handle suitable also for use with gloves. Non-slip G-10 scales with rough grip surface. Large holes in the grip improve grip-safety and give better balance. Additional holes for optional safety cord. Solid steel construction made of stainless Boehler N695 steel (HRC 58). Two versions available. Extremely resistant DLC carbon coating (diamond-like-carbon) for sea water environment. Additional micro serration for fishing nets. A Cordura sheath with Kydex lining allows a variety of fastenings (forearm, M.O.L.L.E.).
Steak set, stainless
by Linder
#53290412
Steak set, stainless by Linder
6 knives and 6 forks. Genuine stag handles with stainless butt caps. In presentation case.
Desert Fox Damast
by Fox Knives
#5455212
Desert Fox Damast by Fox Knives
The Israeli instructors, engineering, gunsmithing and Krav Maga specialist Boris Manasherov sets with the Desert Fox against a further impressive penknife.
The sleek, low-cut handle houses a massive blade that is versatile to use in everyday life as well as in use. The deep finger grooves guarantee an extremely safe handling, and the milled handles support safe and quick change of grip position.
An expressive utility knife, which combines practicality with spectacular lines. The blue anodized handle shells of titanium Framelocks give the knife not only a touch of refinement, but also reduce the weight considerably.
The blade is made of stainless powder metallurgical Damasteel in pattern "Björkmans Twist" and not only scores with its beautiful grain, but also with the typical Damasteel high hardness and edge retention. Abandoning glass breaker and Flipper leaves the closed knife be more compact.
Damscus III 42
by Böker
#545131
Damscus III 42 by Böker
The 3rd generation. In pure handiwork of the gun barrel steel is with a tool steel (chromium, manganese and vanadium-alloyed) and the bearing steel 1.3505 to about 300 layers for differential damask.
This creates a Leopard Damascus blade with unparalleled cut features and a hardness of HRC 61-63. Clearly shows the three different steels can be seen in each blade. The handle made from CNC machined aluminum AlMgSi1 is olive gray hardcoat anodized and is in striking contrast to the dark grenadilla wood inlay.
Without pinball, with Nail nick. With moveable clip. Delivered in a wooden box with certificate.
Made in GERMANY.
DAMASCUS II
by Böker
#541079
DAMASCUS II by Böker
The successor of our first knife with a Damascus blade forged out of the barrel. The edge holding ability is much higher compared to what other steel can achieve. A hardness of 65-67 HRC gives you an indication what to expect. Our forger's capabilities are proven by his Damascus pattern: Large Pyramid. Handle material is hardcoated 6061-T6 aluminum with Ziracote wood insets. The clip can be switched for tip-up or tip-down carry. The knife includes a certificate of authenticity and a wooden presentation box.
messer+dolche travellermesser fahrtenmesser taschenmesser jagdmesser klappmesser schließmesser schliessmesser
Eickhorn RT-I-TAC
by Eickhorn
#53820116
Eickhorn RT-I-TAC by Eickhorn
RT-I-TAC - Especially for rescue teams the RT-I-TAC - model was developed on the basis of the legendary Eickhorn LL80 knife for paratroopers. Among the most important characteristics of the knife is the blade with the half serrated cutting edge. Clothing, belts, straps or core coated ropes up to 11 mm present no problem for this blade. The blade can be opened onehandedly even with gloves, without any danger to the hand. A glass breaker facilitates rescue through window panes. The fold-out thorn sensibly widens the field of action of the RT-I-TAC. For cleaning purposes the RT-I-TAC can be completely dismantled. The blade is made of stainless 440-A steel (HRC 56). Fibre glass reinforced polyamide grip. Overall length 22,2 cm. Blade 8,5 cm. Blade thickness 3,3 mm. Weight 210 g.
Military Fluted Titanium Heat ...
by Spyderco
#543986
Military Fluted Titanium Heat Flamed by Spyderco
The youngest scion of the legendary series of Spyderco Military. The handles are made of solid titanium anodized individually and fall of different colors, the range goes from blue through violet tones to bronze tones.
This makes every knife unique specimen. The fine milling of the grip reminiscent of the rays of the rising sun. Blade Steel CPM S6V.
knives+knifes+daggers pocketknife travellerknife combat fighting camping survival
Damask Pure Utility Knife
by Böker
#5455048
Damask Pure Utility Knife by Böker
Pure pleasure by cutting a purely function-oriented design. Scandinavian design, clear style, perfect grip.
Stainless steel blade forged from 250 layers of stainless Damascus steel. High quality grips from centuries-old bog oak.
messer+dolche europaeische kuechenmesser kueche küchenmesser kochmesser
Stiletto Butterfly
by Haller
#606053
Stiletto Butterfly by Haller
A folding knife in the design of a butterfly knife.
The blade in stiletto form in black coated 420 stainless steel blade is not sharpened on the back. The locking of the blade by means of liner lock.
The handle is made of light metal with belt clip.
Helios Damascus
by Böker
#541080
Helios Damascus by Böker
The Damascus is forged out of the German battle tank Leopard I. This specialty steel is not available to the market because it was only used for the military. Our Damascus forger was fortunate to acquire some for Boker exclusively. A chromium-manganese and vanadium tool steel alloy was added to this extremely wear-resistant barrel steel. The result is a remarkably high hardness for Damascus steel (63-65 HRC). The pattern provided on the blade is labeled Small Pyramid. Handle material is 6061-T6 aluminum and features Ziracote wood inlays. Knife includes a certificate of authenticity and gift box. Serialized.
Norrsken Damask
by Karesuando
#5455186
Norrsken Damask by Karesuando
Precious, valuable and thoroughly Nordic - this is the Norrsken Damask Karesuando.
The blade is made from stainless Damasteel from Sweden, which is not only to look extraordinarily beautiful, but its validity is in use for many years steadfastly demonstrated.
Norrsken is Swedish and means "northern lights" or "aurora", so says the Aurora Borealis. The aurora is created in the sky over the magnetic poles of the earth by electrically charged particles, driven by solar winds hitting the Earth's atmosphere and so let the incomparable play of color occur in the night polar sky.
The Norrsken Damask is made of Damasteel exclusively for Karesuando, and its pattern is inspired by the veils, the arc-shaped and multicolored looming in the night sky.
The handle is made of curly birch and reindeer horn and with a small horn plaque embedded in the wood.
The delivery takes place in a box with reindeer fur lining and a leather sheath with plastic insert.
Mokume Damascus imbuia
by Böker
#543851
Mokume Damascus imbuia by Böker
Particularly exquisite collectible we present the Boker Mokume Damascus.
Two exceptional materials from the forging of the American damascus Miedes Rob Thomas together in a knife to a stunning combination of stainless Damascus (150 layers) in the pattern -Typhoon- has an unusually delicate drawing, which is the result of a very controlled forging process.
The jaws of this knife are made according to an old Japanese model of Mokume, a combination of various non-ferrous metals, the partially fused in a complex process together and for differential and thus also obtain a former star scale drawing.
Handles made of selected wood Imbuia complete the classy look.
A lockback locking mechanism ensures secure locking of the blade.
Comes in a collector's box made of wood and with certificate.
Eickhorn S.E.K.-P (Police)
by Eickhorn
#53825119
Eickhorn S.E.K.-P (Police) by Eickhorn
Special Emergency Knife, designed by Dietmar Pohl. Features: Special dagger blade. Emphasised cross guard on both sides for more safety. 10,5 cm long handle suitable also for use with gloves. Non-slip G-10 scales with rough grip surface. Large holes in the grip improve grip-safety and give better balance. Additional holes for optional safety cord. Solid steel construction made of stainless Boehler N695 steel (HRC 58). Two versions available. Blade with sand blasted dull finish. The special Kydex sheath allows lightning fast draw in emergency situations.
Stiletto Butterfly 83801
by Haller
#6010145
Stiletto Butterfly 83801 by Haller
A folding knife in the design of a butterfly knife. The handle is made of light metal with belt clip.
messer+dolche taschenmesser klappmesser einhandtaschenmesser einhandmesser springmesser springermesser einsatzmesser tactical knives stillet stllett stiletto stilletto
Saga Grenadill Set
by Böker
#5455210
Saga Grenadill Set by Böker
With the kitchen knife series Boker Saga, made by hand in the factory in Solingen, Boker takes a bridge and raises the issue of "cutting in the kitchen" to a new level.
The decades of experience in outdoor knives as well as the inventiveness and creativity of the Danish Knife maker Jesper Voxnaes have been incorporated into the concept and design of Saga to set ergonomic and tapping new technical standards. Careful transfer this common know-how in the culinary field guarantees that working with Boker Saga is a unique experience.
The gently curved handles are made of exclusive grenadilla. With its high hardness and density Grenadill among others firmly established in the European woodwind. Already at first contact with the knife series Boker Saga its accomplished ergonomics is clear: Each arc, every turn in the line clings to its place in the hand and provides a total control and superior cutting experience. The dovetail widened handle end of the larger models brings additional grip. The high stability owes Boker Saga the completely continuous Erl, which runs through the knife (in the same design as many hunting knife) from the blade tip to the handle end.
For optimum cutting performance is not only the complete flat cut of the blade with stonewashed finish, but also the choice of 440C blade steel, the usual kitchen knife steels far surpasses regarding edge retention and corrosion resistance. This surface finish produced in a special grinding method is characterized by excellent sliding properties in the cut, thus promoting the already excellent cutting performance. Furthermore, the microstructure of stonewashed finish is extremely resistant to scratches, as these visually lose often in the structure.
The special accent put the large rivets, unmistakably bear the handwriting of Jesper Voxnaes.
Gurkha-Knife
by Citadel
#605669
Gurkha-Knife by Citadel
Hand-forged blade from DNH7 carbon steel, with forged tracks differentiated hardened - visible temper line.
Handle made of rosewood, Knauf and jaw stainless steel.
High-quality leather sheath and Corduramappe.
Made in Cambodia.
#605804
Crossbow Rifle
With skeleton shaft, fiberglass bow and stirrup.
Includes two arrows.
messer+dolche europaeische+waffen armbrustschiessen waffen ninjutsu armbrustpistole armbrustgewehr
Linder Switchblade - ebony woo ...
by Linder
#53302221
Linder Switchblade - ebony wood by Linder
Linder switchblade knife with lockable 420 stainless steel blade. Ebony wood handle. 8 1/4 overall.
Eickhorn KM4000
by Eickhorn
#53825130
Eickhorn KM4000 by Eickhorn
The new KM4000 offers additional functions in relation to the advanced KM3000: wire cutter and back saw. It also features a new tanto blade design and a glass breaker at the end of the handle. Fiberglass enforced synthetic handle. Blade made of 55Si7 spring steel, with black Kalgard coating against corrosion. Synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
knives+knifes+daggers pocketknife travellerknife combat fighting camping survival
Eickhorn RECONDO III
by Eickhorn
#53825131
Eickhorn RECONDO III by Eickhorn
The new RECONDO III offers additional functions in relation to the advanced DESERT COMMAND II: wire cutter and back saw. It also features a new tanto blade design and a glass breaker at the end of the handle. Fiberglass enforced synthetic handle. Blade made of 55Si7 spring steel, with black Kalgard coating against corrosion. Synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
Rubber Knife Special
by DanRho
#1021
Rubber Knife Special by DanRho
This rubber knife has a form of Tanto. Ideal for self-defense training.
Lantalainen Damascus
by Karesuando
#5455187
Lantalainen Damascus by Karesuando
Preferred from Sweden produced powder metallurgically and characterized not only by its beautiful grain, but also by the atypical for Damascus Steel corrosion resistance which makes the Lantalainen Damascus not only an exquisite collector's item, but also to a quality utility knife.
With the pattern "Thor" preferred has outdone themselves however. The fascinating location history creates an incredibly complex pattern reminiscent of flickering flames, which is unparalleled in the broadcast.
The dark-stained handle made of curly birch joins an intermediate piece of reindeer horn, which is concluded by the hand guard made from brass.
The Lantalainen is provided with puncture protection and classical belt loop damask in a casket with a deposit from real reindeer fur and with a leather sheath.
Mammut I
by Böker
#544324
Mammut I by Böker
About the unbelievable period of 4 million years ago, populous huge herds of mammoths large parts of our prehistoric earth.
It was not until about 4000 years ago, the last specimens of this majestic species are extinct. Preferred Jadgbeute of early man, the mammoth played an important role at that time.
In the Siberian ice almost completely preserved mammoths are found again and again that are perfectly preserved by the constant freezing temperatures.
A molar tooth of such a mammoth is the handle material for this fine collector's knife. The unique structure of these teeth as well as their extreme hardness, designed a handling extremely demanding, provide an almost unsurpassable exclusivity in Serienmesserbau. With certificate of authenticity.
Forge Wood Set
by Böker
#5455208
Forge Wood Set by Böker
Knife block:
Overall height 22.4 cm, width 19.5 cm, depth 35 cm, solid wood (maple) and stainless steel. the blades are secured by strong magnets. Fits cooking all types of knives.
knife:
Chef knife: Overall length: 34.5 cm, blade length: 20,0 cm, blade thickness: 2.4 mm
Santoku: Overall length: 29.2 cm, blade length: 16,0 cm, blade thickness: 2.5 mm
Bread knife: Overall length: 36,0 cm, blade length: 22,0 cm, blade thickness: 2.7 mm
Utility knife: Overall length: 22,0 cm, blade length: 11,0 cm, blade thickness: 1.5 mm
Paring Knife: Overall length: 20,0 cm, blade length: 9,0 cm, Blade thickness: 1.5 mm
Carving knife: Overall length: 32.0 cm, blade length: 20,0 cm, blade thickness: 2.5 mm
The stainless steel (chrome molybdenum vanadium) forged knives are perfectly balanced and lie by the ergonomic handle design perfectly in the hand.
Black handles made of high-quality special plastic traditionally associated with three stainless steel rivets permanently and without joints to the completely continuous tang.
The design of the blade, including the transition to the bolster allows for easy resharpening and guarantees in combination with proper maintenance (please knives only by hand washing and not cleaned in the dishwasher!) A long term perfect function of the cutter.
Moreover, convinced the series Boker Forge with an extremely attractive price-performance ratio.
Laguiole knife with Damascus B ...
by Laguiole
#605942
Laguiole knife with Damascus Blade by Laguiole
Traditional Laguiole Pocket knife with blade, hand forged Damascus Steel (not stainless) from France.
The handle scales is made of Horn, the spring and the bee are also forged. Delivered in an elegant collector's box.
Special run 67 Damascus
by Böker
#5454787
Special run 67 Damascus by Böker
The model 67 by Jens AnsØ is convinced of the genes produced while designed as a pure-bred utility knife has however also several times as a precious collector's item. Now, the time was ripe for a damask version that breaks new ground with its skillful blend of classic and modern elements in this model.
As usual, the handle, where for the first time a dual titanium Board is used, houses the sturdy Framelock. The rear Board of the Titan is, as well as the actionable clip.
The stainless damask pattern Boomerang comes from Chad Nichols in Mississippi and impressed not only with his high-contrast pattern, but also its practicality. The warm colour of the anterior scales from stabilized curly maple and the noble idea of this wood offers an exceptional look and feel not only the eye, but not behind the rest of the knife through the stabilization in terms of resistance.
A unique design that is equally enthusiastic collectors and users of high-quality and unusual knife. Delivery in noble collectors box and certificate.
Muela Colibri Damask
by Muela
#604971
Muela Colibri Damask by Muela
The knife blades are made of stainless Daaststahl RWL34 and PMC27. These steels are forged together at 1,150 degrees Celsius and under very high pressure. This steel is characterized by its high hardness, strength and fracture insensitivity. As a special feature Muela sets each blade in the rest of the steel piece from which the blade was cut. Each knife comes with a leather pouch and a premium gift box.
The popular Colibri by Muela is now available with high-quality, full tang Damascus blade. A handy, small knife with stag.
Multi-layer steel (folded blade) is also known as Damascus or Damascus blade, although European and Asian production methods differ slightly from one another. The fine pattern of the individual layers of the multi-folded steel give this product its special charm and are at the same time guarantees a long product life and high product quality.
Made in Spain.
Kalashnikov damask
by Böker Plus
#5454839
Kalashnikov damask by Böker Plus
A particularly fine collector version with Damascus steel blade (carbon steel) enriched the very successful k Pocket knife series.
The Spearpointklinge of the automatic knife inspires with the finely drawn damask (192 positions forged!), making it an exclusive but affordable collectible.
Scout Amboyna damask
by Böker
#5455196
Scout Amboyna damask by Böker
An elegant Lockback Knife with beautiful Amboinabeschalung. In contrast to the traditional construction with brass plates and JAWS welded-on, the massive nickel silver body consists of one piece.
It is manufactured in a complex sintering process and lies perfectly in the hand. The Damascus hand forged by Ched Nichols makes this knife with its fine structure to the desired collectible.
Delivered in an elegant gift box and with damask certificate.
Eickhorn FS2000 British Comman ...
by Eickhorn
#53825147
Eickhorn FS2000 British Commando by Eickhorn
Limited Edition Fairbairn Sykes Dagger FS2000 of only 999 pieces. Each knife is serial numbered. Kalgard coated 55Si7 spring steel blade is double edged.
Same classic handle design (hard-anodised aluminum) as was on the original 1941 British Special Forces knife. Black leather belt sheath with snap retainer, paracord retainer, and paracord leg ties.
Eickhorn FS2000 British Comman ...
by Eickhorn
#53825148
Eickhorn FS2000 British Commando by Eickhorn
Limited Edition Fairbairn Sykes Dagger FS2000 of only 999 pieces. Each knife is serial numbered.
Kalgard coated 55Si7 spring steel blade is double edged. Same classic handle design (hard-anodised aluminum) as was on the original 1941 British Special Forces knife. Black leather belt sheath with snap retainer, paracord retainer, and paracord leg ties.
