similar items like knife you will find here...
Eickhorn KM4000
by Eickhorn
#53825130
Eickhorn KM4000 by Eickhorn
The new KM4000 offers additional functions in relation to the advanced KM3000: wire cutter and back saw. It also features a new tanto blade design and a glass breaker at the end of the handle. Fiberglass enforced synthetic handle. Blade made of 55Si7 spring steel, with black Kalgard coating against corrosion. Synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
Neck Knife 80442
by Haller
#606006
Neck Knife 80442 by Haller
The single-edged dagger-shaped blade made of 420 stainless steel, the handle is made of non-slip rubber. The Kydex sheath has a ball chain made of metal.
The idea of ​​a Neck Knife is simple. A knife with a sheath that you can hang around your neck. So the knife is independent to wear a belt or pocket and anytime ready for access.
This results in specific requirements of the knife:
- It must be easy, for hanging around your neck you can feel every gram of unnecessary
- It must be securely seated in the vagina, since it hanging upside down in the vagina
- It must at the same time can be drawn without much force required, as you could otherwise injure themselves
Therefore, especially Kydex sheaths have prevailed with a click or snap lock in this area. The weight in each case including vagina.
messer+dolche taschenmesser klappmesser neckknife neck knife halsmesser halskette camping survival jugendmesser freizeitmesser
Eickhorn RECONDO III
by Eickhorn
#53825131
Eickhorn RECONDO III by Eickhorn
The new RECONDO III offers additional functions in relation to the advanced DESERT COMMAND II: wire cutter and back saw. It also features a new tanto blade design and a glass breaker at the end of the handle. Fiberglass enforced synthetic handle. Blade made of 55Si7 spring steel, with black Kalgard coating against corrosion. Synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
Eickhorn KM5000
by Eickhorn
#53825132
Eickhorn KM5000 by Eickhorn
Combat Knife with highly flexible blade of 55Si7 spring steel. Hollow-ground for better cutting performance and Kalgard coated against corrosion. Carrying system fits MOLLE and IdZ standard. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
knives+knifes+daggers daggers combat fighting army+daggers military+daggers military+knifes army+knifes
Eickhorn KM2000
by Eickhorn
#53825101
Eickhorn KM2000 by Eickhorn
Double sided Tanto blade made of Boehler N695 steel (HRC 57) with black Kalgard coating and half serrated cutting edge. Fiberglas enforced synthetic cross guard. Black synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Comes with diamond sharpener. Overall length 30.2 cm. Blade length 17,2 cm. Blade thickness 5 mm. Total weight 330 g.
Eickhorn S.E.K. II G-10
by Eickhorn
#53825140
Eickhorn S.E.K. II G-10 by Eickhorn
Single-Edge version of the extraordinary successful S.E.K., with Spear-Point blade and reinforced blade back. Blade of Böhler N695 steel with dull finish. G-10 rough grip handle. Comes in Kydex sheath. Overall length 21,5 cm. Blade length 10 cm. Blade thickness 5 mm. Weight 140 g.
Eickhorn KM3000, plain blade
by Eickhorn
#53825122
Eickhorn KM3000, plain blade by Eickhorn
Upon request of experienced soldiers master designer Dietmar Pohl developed the KM3000 model with a spear point blade tip which offers the soldier a far wider application spectrum. Boehler N695 steel blade (HRC 57) with black Kalgard coating. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm. Weight 330 g.
Eickhorn DESERT COMMAND I
by Eickhorn
#53825115
Eickhorn DESERT COMMAND I by Eickhorn
To meet the conditions of desert-like operational areas, Eickhorn meanwhile offers the KM2000 in coyote colourings. In its version DESERT COMMAND I it perfectly adapts to the desert camouflage scheme. Double sided Tanto blade made of Boehler N695 steel (HRC 57) with black Kalgard coating and half serrated cutting edge. Fiberglas enforced synthetic cross guard. Coyote cultured synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Comes with diamond sharpener. Overall length 30.2 cm. Blade length 17,2 cm. Blade thickness 5 mm. Total weight 330 g.
Eickhorn KM2000-BW (German Arm ...
by Eickhorn
#53825102
Eickhorn KM2000-BW (German Army Original Version) by Eickhorn
The official combat knife of the German armed forces with the NATO supply number 1095-12-355-6742. Double sided Tanto blade made of 1.4110 stainless steel with black Kalgard coating and half serrated cutting edge. Fiberglas enforced synthetic cross guard. Black synthetic sheath with lanyard, fits all U.S. - M.O.L.L.E. and German IDZ carrying systems. Comes with diamond sharpener. Overall length 30.2 cm. Blade length 17,2 cm. Blade thickness 5 mm. Total weight 330 g.
Eickhorn S.E.K.-P (Police)
by Eickhorn
#53825119
Eickhorn S.E.K.-P (Police) by Eickhorn
Special Emergency Knife, designed by Dietmar Pohl. Features: Special dagger blade. Emphasised cross guard on both sides for more safety. 10,5 cm long handle suitable also for use with gloves. Non-slip G-10 scales with rough grip surface. Large holes in the grip improve grip-safety and give better balance. Additional holes for optional safety cord. Solid steel construction made of stainless Boehler N695 steel (HRC 58). Two versions available. Blade with sand blasted dull finish. The special Kydex sheath allows lightning fast draw in emergency situations.
knives+knifes+daggers pocketknife travellerknife combat fighting camping survival
Eickhorn S.E.K. II WOOD
by Eickhorn
#53825141
Eickhorn S.E.K. II WOOD by Eickhorn
Single-Edge version of the extraordinary successful S.E.K. , with Spear-Point blade and reinforced blade back. Blade of Böhler N695 steel with satin finish. Darkbrown Ziricote wood handle. Dark brown boot knife sheath with clip. Overall length 21,5 cm. Blade length 10 cm. Blade thickness 5 mm. Weight 140 g.
Eickhorn KM3000, part serrated ...
by Eickhorn
#53825116
Eickhorn KM3000, part serrated blade by Eickhorn
Upon request of experienced soldiers master designer Dietmar Pohl developed the KM3000 model with a spear point blade tip which offers the soldier a far wider application spectrum. Boehler N695 steel blade (HRC 57) with black Kalgard coating. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm. Weight 330 g.
Neck Knife 40408
by Haller
#605819
Neck Knife 40408 by Haller
The blade is 420 stainless steel and comes fully through to the end of the handle.
The riveted handle is made of plastic. The Kydex sheath has a ball chain made of metal.
The idea of ​​a Neck Knife is simple. A knife with a sheath that you can hang around your neck. So the knife is independent to wear a belt or pocket and anytime ready for access.
This results in specific requirements of the knife:
- It must be easy, for hanging around your neck you can feel every gram of unnecessary
- It must be securely seated in the vagina, since it hanging upside down in the vagina
- It must at the same time can be drawn without much force required, as you could otherwise injure themselves
Therefore, especially Kydex sheaths have prevailed with a click or snap lock in this area. The weight in each case including vagina.
Eickhorn S.E.K.-M (Marine)
by Eickhorn
#53825113
Eickhorn S.E.K.-M (Marine) by Eickhorn
Special Emergency Knife, designed by Dietmar Pohl. Features: Special dagger blade. Emphasised cross guard on both sides for more safety. 10,5 cm long handle suitable also for use with gloves. Non-slip G-10 scales with rough grip surface. Large holes in the grip improve grip-safety and give better balance. Additional holes for optional safety cord. Solid steel construction made of stainless Boehler N695 steel (HRC 58). Two versions available. Extremely resistant DLC carbon coating (diamond-like-carbon) for sea water environment. Additional micro serration for fishing nets. A Cordura sheath with Kydex lining allows a variety of fastenings (forearm, M.O.L.L.E.).
Eickhorn POHL ONE G10 DE
by Eickhorn
#53804231
Eickhorn POHL ONE G10 DE by Eickhorn
The POHL ONE G-10 (see above) in a version that can be carried without restriction in Germany. The knife can only be opened using both hands.
Haller Tanto Neck Knife
by Haller
#603119
Haller Tanto Neck Knife by Haller
Neck Knives
Blade length 75 mm, overall length 175 mm
A Neck Knife is always useful if the traditional ways a knife with him to wear is not feasible. This problem also occurs at the sport. Obviously you have a knife in such certain requirements: it must be easy, it must be flat, it should not apply too much and also it should be handy. A skeletal knife with black coated Tanto blade made of 420 stainless steel. With only 68 grams, it is very easy. On the blade is fully through a black plastic wrap upset. The Tanto Neck Knife is distinguished with a Kydex whistle delivered.
BlackField tactical machete
by BlackField
#606121
BlackField tactical machete by BlackField
A powerful machete with non-slip rubber grip for a secure hand position. The titanium-coated blade is made of 420 stainless steel, and has a thickness of 6.5 mm at its widest point.
What different carrier opportunities with strong Nylon Sheath.
messer+dolche militaer militaermesser militärmesser armeemesser kampfmesser tactical knife knives taktische taktisches messer einsatzmesser kukri khukri ghurka gurka gurkha machete buschmesser
Eickhorn RECONDO IV
by Eickhorn
#53825133
Eickhorn RECONDO IV by Eickhorn
Combat Knife with highly flexible blade of 55Si7 spring steel. Hollow-ground for better cutting performance and Kalgard coated against corrosion. Carrying system fits MOLLE and IdZ standard. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm.
knives+knifes+daggers daggers combat fighting army+daggers military+daggers military+knifes army+knifes
Neck Knife 80441
by Haller
#606005
Neck Knife 80441 by Haller
Made of 420 stainless steel, black coated. The Kydex sheath has a ball chain made of metal.
The idea of ​​a Neck Knife is simple. A knife with a sheath that you can hang around your neck. So the knife is independent to wear a belt or pocket and anytime ready for access.
This results in specific requirements of the knife:
- It must be easy, for hanging around your neck you can feel every gram of unnecessary
- It must be securely seated in the vagina, since it hanging upside down in the vagina
- It must at the same time can be drawn without much force required, as you could otherwise injure themselves
Therefore, especially Kydex sheaths have prevailed with a click or snap lock in this area. The weight in each case including vagina.
Eickhorn DESERT COMMAND II
by Eickhorn
#53825123
Eickhorn DESERT COMMAND II by Eickhorn
Upon request of experienced soldiers master designer Dietmar Pohl developed the KM3000 model with a spear point blade tip which offers the soldier a far wider application spectrum. In order to hold its own in desert-like surroundings Eickhorn additionally offers the DESERT COMMAND II in a coyote-coloured version. Boehler N695 steel blade (HRC 57) with black Kalgard coating and half serrated cutting edge. Carrying system as per model DESERT COMMAND I. Overall length 30,2 cm. Blade 17,2 cm. Blade thickness 5 mm. Weight 330 g.
knives+knifes+daggers pocketknife travellerknife combat fighting camping survival
Zero Tolerance Model 0350
by Zero Tolerance
#53470350
Zero Tolerance Model 0350 by Zero Tolerance
Blade of S30V stainless steel with Tungsten DLC coating. SpeedSafe® quick-opening, frame lock. Blade length 3.25, thickness .121. G-10 handle. Weight 5.6 oz. (159 g). The Zero Tolerance knife range is adjusted to the high demands of police, military, rescue and special forces.
Red Karambit
by Haller
#6010105
Red Karambit by Haller
The black coated blade is made of 420 stainless steel and locked by means of liner lock.
The handle is made of light metal. With belt clip and belt cutter.
The blade shape originated in the Indonesian Karambit space and can be traced back to the 11th century. The curved blade shape is excellent for drawing cuts. Be locked by means of the blade Liner lock.
Black KA-BAR
by KA-BAR
#602616
Black KA-BAR by KA-BAR
Messer der United States Marine Corps
The amerikansche knife manufacturer KA-BAR celebrates its 100th anniversary in 1998. The well-proven and well-known model is the USMC, the diameter of the United States Marine Corps, known from the second world war. The blades are made of 1095 high-carbon steel and are hardened at subzero temperatures of 120 degrees, Rockwell hardness 56 - 58 The blades have a black powder-Epoxydbeschcihtung. which serves both as corrosion protection, as well as protection from light reflection.
The legendary KA-BAR is now available in all black. Handle Material Kraton G elastomer with metal end. A black leather sheath is one of them.
Made in USA.
Linder Kukri Set
by Linder
#53450006
Linder Kukri Set by Linder
Linder Kukri Set. 440A stainless steel. Set includes main knife and two small knives. Blade length of main knife 7 3/4. Handle and sheath with metal parts.
Combat dagger
by Haller
#6010232
Combat dagger by Haller
The blade is made of black coated 420 stainless steel. The handle is made of non-slip rubber. With Nylon Sheath.
PRT I - Pocket rescue knife
by Linder
#53802214
PRT I - Pocket rescue knife by Linder
PRT I - Pocket rescue knife with remarkable features: anodised AIMg3 aluminum grip, synthetic resin lining and trousers clip (tip-down attachment). Spear point blade from stainless Boehler N695 steel (HRC 58) with semi gloss finish and half serrated cutting edge. Liner lock-device with safety-stop, integrated belt cutter and glass breaker. Overall length 20,5 cm. Blade 8,4 cm. Blade thickness 2,5 cm. Weight 125 g.
Muela knife 61646
by Muela
#603690
Muela knife 61646 by Muela
Messer-Typhoon
Another Military series developed from quality manufacturers Muela
Spain. The knife has a good size ratio between grip and
Blade. The blade is made of high quality steel 440C, goes fully through to the end of the handle, where it has an eyelet for a lanyard. As Griffbeschalung rugged Micarta is screwed. Belongs to Messer
a quality sheath. Blade length 145 mm, overall length 270 mm.
Made in Spain.
Linder Military Knife
by Linder
#53448218
Linder Military Knife by Linder
6420 stainless blade with groove. Metal handle with non-slip rubber coating. Special cordura sheath with sharpening stone. Blade length 7.
Survival knives junior adventu ...
by Haller
#606029
Survival knives junior adventurer Camo by Haller
A survival knives for teenagers with rounded safety tip.
The black-coated blade is made of 420 stainless steel, handle made of light alloy. The handle end cap is unscrewed, is inserted a compass. Survivalutensilien is located in the hollow handle.
Each knife is a Nylon Sheath.
messer+dolche taschenmesser travellermesser fahrtenmesser kampfmesser tactical knife knives taktische taktisches messer camping jugendfreizeitmesser jugendmesser
#603556
Boot Dagger 80738
Boot Dagger with black Kunststoffbeschalung and stainless steel blade, cross guard and butt cap made of brass. Comes complete with sheath including belt clip.
Made in Pakistan.
#603555
Boot Dagger 80737
Stiefeldolch
Boot Dagger with Holzbeschahlung and stainless steel blade, cross guard and butt cap made of brass.
With scabbard. Blade is sharp.
Made in Pakistan.
Apache
by BlackField
#6010116
Apache by BlackField
A powerful use knives.
The black coated blade is constructed from 440 stainless steel and with a part serrated edge. The handle is made of non-slip plastic, the back of the blade is an extra thumb rest to increase the pressure sheath.
Due to the strong guard and the finger grips can grab the knife securely even when wearing gloves.
The nylon sheath provides versatility and features a patch front pocket.
BlackField carrier F22 drop po ...
by BlackField
#6010362
BlackField carrier F22 drop point blade by BlackField
Survival knives with coated blade, 1070-high-carbon steel (not stainless). Various bits are inserted into the screw-on hollow metal handle.
The Nylon Sheath has a plastic holder for mounting of the blade, as well as a front pocket.
Raptor
by BlackField
#6010311
Raptor by BlackField
The BlackField Raptor is bringing the knife is particularly safe in hand at the end of the handle, a vigorous Karambit knife with the typical ring.
Completely made from 440 stainless steel in a stonewash finish. As handle scales, two G10 cups are screwed up. On the back of the blade, a sharp, coarse serrated blade is located in addition.
Including Kydexscheide with belt clip.
messer+dolche travellermesser fahrtenmesser kampfmesser tactical knife knives taktische taktisches messer camping survival einsatzmesser taschenmesser klappmesser arnis escrima kali asiatische+budowaffen springmesser springermesser kerambit karambit
#6010452
Smith & Wesson Stiefeldolch
Kräftiger Stiefeldolch mit Klinge aus 8CR13MOV rostfreiem Stahl im stonewashed-finish. Als Griffbeschalung sind zwei G10 Schalen aufgeschraubt.
#6010465
Schrade Karambit Neck Knife
Karambit Messer mit Klinge aus 9Cr18MoV rostfreiem Stahl.
Mit Kydexscheide und Kugelkette aus Metall.
U.S. M3 fighting knife
by Jean Fuentes
#651771
U.S. M3 fighting knife by Jean Fuentes
The M3 fighting knife developed in 1943 and should be issued to all US during the second World War American soldiers, carried no bayonets with. The carbon steel blade is phosphated and 17 inches long.
The handle is made of pressed leather rings just like the original. A knife sheath is included in the scope of delivery.
-stable fighting knives
-Carbon steel blade
-Blade length: 17 cm
-Total length: 29.5 cm
-Weight: 340 g
-with knife sheath
-hot ground
-non-slip leather handle
Scope of delivery: fighting knives and Knife Sheath
Sale only to persons over 18 years. For purchase, we require proof of age.
#6010454
Smith & Wesson Neck Knife
Ein Neck Knife mit titanbeschichteter Klinge aus 8CR13MoV rostfreiem Stahl. Der Griff ist aus robustem Grivory Kunststoff. Mit Kunststoffscheide und Kugelkette aus Metall.
messer+dolche taschenmesser klappmesser neckknife neck knife halsmesser halskette camping survival jugendmesser freizeitmesser
Military line tank
by BlackField
#6010315
Military line tank by BlackField
The Tantoklinge with half serrated blade makes the tank to a stable usage meter. The blade is made of 440 stainless steel and spring supports are opened. The powerful flipper serves as a hand guard in the open position and can be easily operated even with gloves.
The alloy handle is equipped with a glass breaker, a belt cutter and an eyelet for a safety strap.
#6010460
Smith & Wesson Taschenmesser
Ein Einhandtaschenmesser mit Liner-Lock Arretierung, beidseitigem Daumenpin und Gürtelclip. Die Klinge ist aus 8CR13 MoV rostfreiem Stahl und mit einem Teilwellenschilff versehen, die Griffbeschalung ist aus Kunststoff.
Smith & Wesson Military & Poli ...
#6010457
Smith & Wesson Military & Police Stiletto Taschenmesser
Ein Stiletto Taschenmesser mit Liner-Lock Arretierung und Gürtelclip. Die Klinge ist aus 8CR13 MoV rostfreiem Stahl und schwarz beschichtet. Die Griffbeschalung ist aus Kunststoff.
#6010466
Smith & Wesson H.R.T. Boot
Ein Stiefeldolch mit beidseitig geschliffener Klinge aus 7CR17MOV rostfreiem Stahl. Der Griff ist aus rutschfestem Gummi. Die Kydexscheide hat einen Clip, zusätzlich wird eine Kugelkette aus Metall mitgeliefert, mit der das Messer auch um den Hals getragen werden kann.
Linder Commander
by Linder
#53445020
Linder Commander by Linder
Linder Commander. Combat knife with black coated 420 stainless blade (part-serrated blade back). Non-slip leather handle. Comes in leather sheath. Blade length 8.
BlackField night thorn
by BlackField
#6010365
BlackField night thorn by BlackField
An extraordinary rescue Karambit is the BlackField NIGHT THORN, with the typical ring at the end of the handle, which the knife is particularly safe in hand Pocket knife.
The blade is made of 440 stainless steel and black coated. The handle is made of light metal with a plastic coating. In addition, the knife is equipped with a belt cutter, a glass crusher and a belt clip.
BlackField desert thorn
by BlackField
#6010371
BlackField desert thorn by BlackField
An extraordinary rescue Karambit is the BlackField DESERT THORN, with the typical ring at the end of the handle, which the knife is particularly safe in hand Pocket knife.
The blade is made of 440 stainless steel and black coated. The handle is made of light metal with a plastic coating. In addition, the knife is equipped with a belt cutter, a glass crusher and a belt clip.
#603536
Knife 32526
Einsatzmesser
Tactical Knife with black coated stainless steel blade 420. The handle is made
non-slip plastic. With Kydex sheath.
Manufactured in Japan.
Smith & Wesson Multi Neck Knif ...
#6010453
Smith & Wesson Multi Neck Knife
Ein Neck Knife ganz aus schwarz beschichtetem 8CR13MoV rostfreiem Stahl. Am Klingenrücken befindet sich ein Flaschenöffner. Mit Kunststoffscheide und Kugelkette aus Metall.
Throwing Knife Pro Thro
by Linder
#53990121
Throwing Knife Pro Thro by Linder
Solingen made throwing knife in 1980s style. C60 carbon steel blade. Riveted leather handle.
messer+dolche militaer militaermesser militärmesser armeemesser kampfmesser tactical knife knivestaschenmesser klappmesser einsatzmesser divers
#6010428
Neck Knife G10 Griff
Die Klinge ist im Stonewashinish aus 420 rostfreiem Stahl und geht bis zum Griffende durch. Die aufgenietete Griffbeschalung ist aus G10. Die Kunststoffscheide hat eine Kugelkette aus Metall.
Neck Knife
by Haller
#6010552
Neck Knife by Haller
Ein sehr leichtes und kleines Neck Knife. Die schwarz beschichtete Klinge ist aus 420 rostfreiem Stahl und geht bis zum Griffende durch. Als Griffbeschalung sind beidseitig strapazierfähige G10 Platten aufgenietet. Die Kunststoffscheide hat eine Kugelkette aus Metall.
Tanto Neck Knife rot eloxiert
by Haller
#6010554
Tanto Neck Knife rot eloxiert by Haller
Die Tantoklinge ist rot eloxiert, aus 420 rostfreiem Stahl gefertigt und geht voll bis zum Griffende durch. Am Griff ist eine Kunststoffauflage angebracht.
Tanto Neck Knife blau eloxiert
by Haller
#6010555
Tanto Neck Knife blau eloxiert by Haller
Die Tantoklinge ist blau eloxiert, aus 420 rostfreiem Stahl gefertigt und geht voll bis zum Griffende durch. Am Griff ist eine Kunststoffauflage angebracht.
messer+dolche taschenmesser klappmesser neckknife neck knife halsmesser halskette camping survival jugendmesser freizeitmesser
Pocket Knives Karambit
by Haller
#604948
Pocket Knives Karambit by Haller
Pocket knife with a curved blade have an amazing cutting performance. These blades, which are known to gardeners for a long time, cutting through almost everything through butter. The blades of the lockable pocket knives are made of 420 stainless steel.
Through the ring at the end of the handle can not slip off the handle and the knife is safe in the hand. The handle is made of light metal with clip.
Made in China.
Boot Knife B.K.10
by Linder
#53219910
Boot Knife B.K.10 by Linder
Rugged belt / boot knife with stainless blade of Kalgard-coated 420 steel. Green pakka wood handle, kydex sheath.
messer+dolche dolchmesser stiefeldolch stiefeldolche stiefelmesser bootknive bootknife kampfmesser tactical knife knives taktische taktisches messer einsatzmesser militaermesser einsatzmesser armeemesser
Panda 5
by Linder
#53442509
Panda 5 by Linder
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10.
Linder G-MAN 1
by Linder
#53443714
Linder G-MAN 1 by Linder
Tactical fixed blade knife with titanium-nitride coated 420 stainless steel blade. Green G-10 handle. Comes in textile belt sheath.
440C DEATH ADDER
by Down Under Knive ...
#53446015
440C DEATH ADDER by Down Under Knives
With the power and chopping ability pretty well covered by the OutbackT and Red Rock RaptorT, we turned our attention to speed. We set out to create the flat out fastest and best handling fighting knife we could come up with, with just the right balance and reach to compromise nothing. The result is the new Death AdderT - like its reptilian namesake, capable of delivering a devastating strike in the blink of an eye. The Australian Death Adder can strike, deliver its venom and go back to strike position in 0.15 seconds, and with this dagger a properly trained knife fighter won't be far behind. The full tang 440C construction and uniquely contoured solid ebony grip makes the Death AdderT exceptionally strong and easy to handle in either hand, in any position. We consulted martial arts experts and hunters to find just the right blade dimensions to reach what needs to be reached with no sacrifices in speed and agility. The genuine leather scabbard is also thick and rigid enough to guarantee the blade can be acces
