0 item in shopping cart
KWON Budobelt
by KWON
#803255
KWON Budobelt by KWON
100% Baumwolle
The belt is about 4 cm wide (+/- few millimeters)
Ronin-Katana
by Citadel
#605713
Ronin-Katana by Citadel
Good swords there are many, perfection, however rare. Samurai swords made by Citadel among the best available to buy -next a real Nihonto- on the market. Perfection without "if" and "but" down to the smallest detail. Each sword is completely made by hand. Each participating artisans is a master of his craft. The production of such a work of art takes up to three months and makes each piece unique.
Many samurai swords from mass production, only one strip Same (ray skin) is often glued to each page. In the Citadel complete handle is surrounded by the highest quality ray skin. The winding handle (Ito), made from the finest Japanese silk, is tight in Hineri Maki - fitted style. The strands of the nodes intersect it mutually. Underlaid is the winding (Tsuka Maki) of traditional, folded paper triangles, called Hishigami. The flat-shaped handle (Tsuka) was adjusted 100% to the Angel. A bamboo pen (Mekugi) holds handle and Angel together. As with the historical originals this is conical.
Butt end (Kashira) and grip ferrule (fuchi) are made of iron, covered with simple, but elegant, high-gloss black lacquer. Also iron is the tsuba, which was not cast but made by hand. Ornamental rate (Menuki) with silver plated bronze offer a nice contrast to the dark winding handle (Tsuka-Maki) and underline the graceful picture.
Both the handle (Tsuka), as well as the vagina (Saya) Jakwood dried was used.
In addition to the excellent strength properties, it is also because of its low acid fraction, since it does not damage the blade. Was painted the vagina in matte black, in so
mentioned Ishime style. Vaginal opening (Koiguchi), eye (kurigata) and vaginal degree (Kojiri) are made of water buffalo horn and were adapted in most elaborate handwork. The scabbard (saya) is made individually for each blade individually and ensures absolute fit. With light pressure allows the blade detached from the vagina, but it certainly holds otherwise.
The blade is made of 1075 carbon steel (not stainless). Under traditional Lehmbestrich this was differentiated to 60 HRC on the edge and about 40 HRC hardened at the back of the blade. Directly onto the blade, the blade collar (habaki) was forged. Only then is it possible to guarantee a perfect fit. Through the skills of the polisher the masterful work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result.
As each sword is unique, dimensions and weight may vary. Delivery without sword stand.
Made in Cambodia.
Budo Belt
by DanRho
#10341
Budo Belt by DanRho
DANRHO Budo-Gürtel ca. 4 cm breit
All our budo belts are made of heavy-duty, pure 100% cotton with multiple stitching, ca. 4 cm wide. color white, yellow, orange, green, blue, violet, brown, red and black
uniform belt
Gürtelbestickung positions
by Budoten
#591171
Gürtelbestickung positions by Budoten
Standard embroidery for name / text: horizontal
Standard embroidery for Asian characters: vertical
bestickungsservice stickservice individuelle bestickung motivbestickung embroidery option zusatzoption stickdesign design gürtel guertel budoguertel obi gürtelbestickung guertelbestickung anzuege namensbestickung textbestickung textilbestickung namen
Yushu-Katana
by Citadel
#605711
Yushu-Katana by Citadel
Weight (without scabbard) 1050 g. Good swords there are many, perfection, however rare. Samurai swords made by Citadel among the best available to buy -next a real Nihonto- on the market. Perfection without "if" and "but" down to the smallest detail. Each sword is completely made by hand.
Each participating artisans is a master of his craft. The production of such a work of art takes up to three months and makes each piece unique.
Many samurai swords from mass production, only one strip Same (ray skin) is often glued to each page. In the Citadel complete handle is surrounded by the highest quality ray skin. The winding handle (Ito), made from the finest Japanese silk, is tight in Katate Maki - style attached. The strands of the nodes intersect it mutually. Underlaid is the winding (Tsuka Maki) of traditional, folded paper triangles, called Hishigami. The flat-shaped handle (Tsuka) was adjusted 100% to the Angel. A bamboo pen (Mekugi) holds handle and Angel together. As with the historical originals this is conical.
Butt end (Kashira) and grip ferrule (fuchi) are made of iron, covered with simple, but elegant, high-gloss black lacquer. Also iron is the tsuba, which was not cast, but made by hand. It shows a Japanese temple with Cherry blossom (Sakura no Hana) in the foreground. Ornamental rate (Menuki) with silver plated bronze offer a nice contrast to the dark winding handle (Tsuka-Maki) and underline the graceful picture.
Both the handle (Tsuka), as well as the vagina (Saya) Jakwood dried was used. In addition to the excellent strength properties, it is also because of its low acid fraction as starting material because it does not damage the blade. Was painted the vagina in glossy black, the so-called Kuroro style. Vaginal opening (Koiguchi), eye (kurigata) and vaginal degree (Kojiri) are made of water buffalo horn and were adapted in most elaborate handwork. The front part of the sheath (saya) is also surrounded by Roche skin. This was sanded and painted over later. The result is a smooth surface with a unique look. The scabbard (saya) is made individually for each blade individually and ensures absolute fit. With light pressure allows the blade detached from the vagina, but it certainly holds otherwise.
The blade is made of steel mono (1075er carbon steel, not stainless), but hardened differentiated. Under traditional Lehmbestrich this was differentiated to 60 HRC on the edge and about 40 HRC hardened at the back of the blade. Directly onto the blade, the blade collar (habaki) was forged silver-plated copper. Only in this way is possible the fuller play to the Tsuba and to guarantee a perfect fit. Through the skills of the polisher the masterful work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result.
As each sword is unique, dimensions and weight may vary. Delivery without sword stand
is mono steel (1075er carbon), but hardened differentiated:
Citadel Katana Yushu
The name Yushu (dt. "Perfection") carries this sword to right. The many intricate details make it a work of art of the highest class.
Butt end (Kashira) and grip ferrule (fuchi) are made of iron, covered with simple, but elegant, high-gloss black lacquer. Also iron is the tsuba, which is not cast, but made by hand. It shows a Japanese temple with Cherry blossom (Sakura no Hana) in the foreground. Ornamental rate (Menuki) with silver plated bronze offer a nice contrast to the dark winding handle (Tsuka-Maki) and underline the graceful picture.
- Sword in shinogi-zukuri style with groove (Bo-Hi).
- Situated Schmiedetes, the groove adapted Habaki silver-plated, engraved copper.
- Seppa silver-plated brass.
- Handle of black Japanese silk winding in Katate Maki style (war winding).
- Black, high-gloss lacquered scabbard with built-in ray skin (Same Kuroro style).
The razor sharp blades are made of 1075 carbon steel. Under traditional Lehmbestrich these are differentiated to approximately 60 HRC at the cutting edge and approximately 40 HRC hardened at the back of the blade. Through the skills of the polisher the masterful work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result.
For each sword belongs next to a production certificate, a quality sword bag and a padded Cordura bag for transport.
Handle length 28.5 cm
Blade length 74 cm
Total length (without scabbard) 102.5 cm
Weight (without scabbard) 1050 g
Made in Cambodia.
Citadel Keshi Wakizashi
by Citadel
#6010348
Citadel Keshi Wakizashi by Citadel
Citadel stands for superior quality, which can only be achieved by a masterly hand. All knives and swords are almost entirely made by hand. Minor variations in size and shape are the result of individual single production.
Keshi in German means "poppy", which is the subject of this sword. The Tsuba is blackened iron from the leaves of the poppy. Fuchi, Kashira and Menuki show the unique flowers. Another highlight is the handle wrapped in brown leather, which is wound tightly related to the ray skin handle.
Financial Statements (Kurigata, Kojiri, Koiguchi) from buffalo horn adorn the black, high gloss lacquered scabbard.
The razor-sharp blade is made of 1075 carbon steel. Under traditional Lehmbestrich this distinction was approximately 60 HRC at the cutting edge and around 40 HRC hardened at the back of the blade. A fuller (Bo-Hi), which also shows in the blacksmith ended up Habiki, reduces weight and provides an optimal balance. Due to the skills of the polisher masterful work of the blacksmith comes fully to bear and presents a beautiful hamon.
For each sword belongs next to a production certificate, a quality sword bag, a Sageo from silk, as well as a padded Cordura bag for transport.
Bamboo-Katana
by Citadel
#605712
Bamboo-Katana by Citadel
.
asiatische+budowaffen katana shinken nihonto handgeschmiedet japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito scharf
Tatami Kano
by DanRho
#101467
Tatami Kano by DanRho
Raumgewicht RG 235 oder RG 260
Consisting of foam composite panels. Top and sides laminated with heavy-duty vinyl fabric in rice-straw pattern. Base laminated with non-slip fabric and sealed. Wipe-down, easycare. 3-year warranty against tearing.
Shortcuts in menue Made:
RD: Relative densities
PS: Panel size
T: Thicknesses
Rhode tatami Kasei judo, 4 cm ...
by DanRho
#102442
Rhode tatami Kasei judo, 4 cm RG 200 by DanRho
This is a high-quality foam material composite panel Made-in-Germany:
- Tatami KASEI environment with solvent free, permanently elastic adhesive bonded
- top and side edges with heavy vinyl-coated fabric in rice straw pattern.
bottom with slip resistant fabric laminated and sealed.
- The interior material of the mat is made of a super-light foam material, which allows the athletes safe traps / unwinding.
- kg, its low weight (1 x 1 m-mat about 9 kg, 1 x 2 m-mat about 18) can be the mat surface easy / fast to install and remove.
- using a damp cloth to clean and washable.
- Perfect for the fitness training and good competition, but by the IJF (International Judo Federation) is not approved for official competitions.
- KASEI judo mat is the direct successors of the Supralitematte.
- Odourless (safe / dangerous)
- Designed for many sports suitable, mainly for judo, jujitsu, Jiujutsu, Aikido.
- On request, we send you like a little free Matt pattern pieces.
Fudoshin Samurai Suit
by Jean Fuentes
#651013
Fudoshin Samurai Suit by Jean Fuentes
The suit of armour is delivered in a black transport box which serves as a wooden base. This suit of armour can be drawn! Weight: 50.7 lbs.
Belt embroidery / name embroid ...
by Budoten
#591169
Belt embroidery / name embroidery Latin letters by Budoten
We of Budoten are aware that achieving a graduation in the martial arts, especially your black belt is something very special. It is the totality of all the years of hard work, constant training, self-discipline and often pain.
That is why we do everything, that the belt is something to be really proud and which at the same time stands as a distinctive trade mark of your martial arts. We embroider your belt in a variety of colors such as silver or gold, what distinguishes the belt from the masses.
Of course, we also consider that many have their own belt or specific belt embroider a belt would allow. We are pleased to be able to offer us also embroidery on such belts. We cannot guarantee but unfortunately the material quality of this belt. The embroidery is done so at your own risk. Experience has shown that there are no problems however with belts.
The belt is embroidered by Budoten last but not least enjoy due to the high quality of embroidery popular. All embroideries are by embroidered by Budoten through the belt (so that the material is enhanced rather than weaken it). This is the embroidery on the front of the belt to see clearly and is not covered by ugly seams, which would be required to sew the belt embroidered in the open state again. The back (bottom thread) is your choice either in the same color as the design on the top, or by default simply out blackened.
As we carry out the embroidery in own House, we can implement virtually any desired design in a variety of colors. We enhance also the textiles of other manufacturers with the embroidery of your choice.
If you do not provide information, the embroidery is done horizontally. Thereby, we can embroider up to 20 cm on each side of the belt. Surcharge longer embroideries that are "disappear then but mostly in the node". -An ugly effect.
Optionen für Text-Bestickungen
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
Sonder-Optionen
hier nur € 4.10
schon ab € 1.75
Bestickungsposition
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
Geeignete Stick-Textilien finden Sie hier. Wenn Sie noch Fragen haben, beraten wir Sie natürlich gern.
Stick for Arnis Kali Eskrima t ...
by Budoten
#501302
Stick for Arnis Kali Eskrima training by Budoten
Carved and fire hardened. Rounded ends. Ideal for Arnis, Kali and Eskrima training. Imported directly from the Philippines.
Katsumoto Katana
by John Lee
#605306
Katsumoto Katana by John Lee
Gerfertigt after Museum templates.
The sharply-carved blade of the sword (not stainless) is hand forged from 1095 carbon steel and was provided with a chamfer (Bo-Hi) to reduce weight
Traditional, sophisticated hardening of the blade with clay be stroke, creating a real, beautiful Hamon line. It is for cutting test suitable, by 60° Rockwell at the cutting edge, 40° on the back of the blade.
Blade in the Hon Sanmei built cross section (see figure)
Tsuba iron shows a Samurai handle (Tsuka) made of wood, coated with real, blackened fish skin (same), grip tight, winding made of black cotton, traditionally placed in the Katate Maki - style (war winding).
Blade clamp (Habaki) made of brass, sword fishing especially for holding and fixed with 2 bamboo rods (Mekugi) in the handle.
Scabbard made of wood, decorated with high-quality Sageo (winding). The sword is supplied with certificate which guarantees the authenticity. The delivery takes place in a wooden collector's box with a rack.
Dimensions and Gewichtsangeaben:
Blade length-Tsuba (Nagasa): 77.0 cm
Overall length: 109.5 cm
Total length with sheath: 113.0 cm
Handle length: 32.0 cm
Curvature (sori): 2.7 cm
Focus: approx. 13 cm above the Tsuba
Habaki blade width: 3.0 cm
Blade width at transition to the tip (Kisaki): 2,0 cm
Blade thickness: 0.75 cm
Scabbard weight: 1550 g
Weight without scabbard: 1220 g
Made in China.
Tai Chi Sword 100 cm black woo ...
by Ju-Sports
#721141
Tai Chi Sword 100 cm black wooden scabbard by Ju-Sports
Great metal sword and scabbard, approx 76 cm long blade, total length approx 100 cm, wooden scabbard with metal fittings, handle made of wood (painted black) with metal embellishments.
Weight without scabbard approx 0.500 kg
Kaiten Farbgurt
by Kaiten-Kamikaze
#771013
Kaiten Farbgurt by Kaiten-Kamikaze
Karate beinhaltet Dynamik, Mystik, Faszination - Werte, die man auch bei Kaiten Karate Gi wiederfindet. Das Wissen um die Kampfkunst, die Begeisterung und Leidenschaft dafür spürt man bei Kaiten-Produkten.
Bokken
by Sportimex
#301257
Bokken by Sportimex
The Tsuba is made of plastic. If they are not slipping, it is with a rubber ring attached on bokken. The Tsuba can therefore easily be removed. Of course, the bokken can also be used without Tsuba.
Dan beam embroidery
by Budoten
#591190
Dan beam embroidery by Budoten
A Danbalkenstrich is approx. 5.0 mm thick and is individually adjusted to the width of the belt, so that a Danbalken is approx. 3 cm long with an approx. 4 cm wide belt and approx. 5.0 mm wide. On request we can check also how we can make your Danbalken individually (wide/thin).
We have always supported the embroidery with Dan bar on the belts. Like, we're ready to add later more Dan bar on your submitted belt.
Please note that under certain circumstances the embroidery with our standard colors is possible and we must use a colour of choice at an additional cost. Finally, the new Dan bar of even the color of your previous Dan bar should correspond to
Please select the number of the desired Dan beam. Price = price per Dan beam.
Optionen für Text-Bestickungen
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
Sonder-Optionen
hier nur € 4.10
schon ab € 1.75
Bestickungsposition
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
Geeignete Stick-Textilien finden Sie hier. Wenn Sie noch Fragen haben, beraten wir Sie natürlich gern.
Katana Practical Maga
by Fudoshin
#651310
Katana Practical Maga by Fudoshin
Handgeschmiedet
particularities: hand forged 1095er carbon steel, complex blade typ Soshu Kitae, blade hardness: HRC60, blade back: HRC40, lengh of the blade: 70cm, weight lengh: 102 cm, handle lengh: 27,5 cm, kassan: 8 / 6 mm, total katana: 1380 g, lacquered wood saya, handle is coated with authentic ray skin, handle is traditionally wrapped with cotton and silk thread, blade is razor-sharp, delivery includes katana, saya, cotton sword bag, gloss sword stands, easy cleaning and care kit and wooden box, authenticity certificate, for practical use / cut in training exercise designed
Katana Practical Mégumi
by Fudoshin
#651416
Katana Practical Mégumi by Fudoshin
Handgeschmiedet
Extras:
- Hand forged 1095 carbon steel
- Consuming of blade
- Blade Type soshu Kitae
- Blade: HRC60
- Back of the blade HRC40
- Length of the blade: 68 cm
- Total length: 102 cm
- Kassane: 7 / 4.5 mm
- Katana weight: 1000 g
- Saya weight: 230 g
- Brown lacquered wooden Saya is decorated with genuine mother of pearl
- Handle is coated with authentic ray skin
- Organic wrapping of cotton and silk is traditionally attached
- The sword is sharpened
- Included in delivery: katana, scabbard (saya), cloth sword bag, cleaning and care set, wooden box, and high-sword stand and certificate of authenticity..
- Designed for practical use in training / exercise section
Hand Forged Samurai Sword DAMA ...
by MAGNUM
#543105
Hand Forged Samurai Sword DAMASCUS by MAGNUM
This high-quality sword impresses at first sight! The 71 cm long blade made of 200 layers of hand forged Damascus, the authentic, backed with authentic ray skin handle and the traditional winding make this piece of jewelry into a masterpiece.
In the execution of the sword you could previously recognize the social status of the samurai. The tsuba is decorated with Japanese motifs and has a slightly antique finish on. The subtle Saya is wooden covered with shiny black lacquer.
This sword is sharpened.
John Lee - Golden Autumn
by John Lee
#605724
John Lee - Golden Autumn by John Lee
Hand forged, hot ausgeschliffene, 12x folded blade of 1095 carbon steel
- Blade assembly in Kobuse style * (Hard sheath steel, soft core)
- Differentiated cured with Lehmbestrich to 60HRC and 40HRC at the edge at the back of the blade
- Ornamental rate (Tsuba, Menuki, Fuchi and Kashira) are handmade and represent an autumn motif
- Grip winding is made of black silk, lined with traditional triangles of paper
(Hishigami), as well as authentic ray skin
- Two conical Mekugi (bamboo pins) connect the long-held tang to the handle
- Black, high-gloss lacquered wood scabbard with integral Roche skin inlay
- The financial statements of the vagina (Koiguchi, kurigata, Kojiri)
are made of genuine buffalo horn
- Supplied in a wooden box with cloth bag, seal and certificate
- Manufactured according to museum originals
Made in China.
Wakizashi Bokken BO17
by Jean Fuentes
#651766
Wakizashi Bokken BO17 by Jean Fuentes
The Bokken is a weapon for the Japanese sword arts. In the hands of an experienced kendo master a bokken can be just as exact and devastating as an actual sword. In any case, a bokken is essential for training in most Japanese sword arts.
This is the newest style of bokken. In previous Bokken the problem occurred, that the hands slipped when they were sweaty. Now this problem has been solved by a nylon winding around the handle of the bokken. This addition, although small, has changed many aspects of the bokken. In practice, the close is added to the real sword more.
- Total length: 80 cm
- Material: Wood
- Including plastic tsuba
- Total weight: 470 g
This Bokken is designed for practicing traditional forms of movement. For combat exercises with Contact this Bokken is not enabled.
John Lee Kappa Katana
by John Lee
#606110
John Lee Kappa Katana by John Lee
As Kappa (to German "river child") refers to a mythical creature of Japanese mythology. It is a water goblin, the people who come too close to its waters, tearing into the depths and drowned. But according to legend, they should have a weakness for pickles.
On its hand crafted decorative rates this extraordinary Katana shows a Kappa, and one unsuspecting hikers. Of particular note is next to the beautiful colors and the flute, which begins only about 10 cm above the tsuba.
- Sharp ausgeschliffene Damascus from 12 times folded 1045 carbon steel with more than 8,000 locations
- Sword in shinogi-zukuri style with stepped groove (Bo-Hi)
- Grip winding of red cotton classic Hineri Maki style
- Black, high-gloss lacquered scabbard (Kuroro-style) of wood
- With a long tang which with two bamboo pins (Mekugi) is fixed in the handle, the sword is thus fully separable
- No plastic, it only high-quality, authentic materials are used
- Blade collar (habaki) and washers (Seppa) are made of brass
- The traditional winding handle is highlighted with authentic ray skin
- All trim rate (Tsuba, Fuchi, Menuki, Kashira) are handmade from metal
- Supplied with protective cover made of fabric
- Each original John Lee sword is a seal and a certificate in
Tanto Flores
by Citadel
#6010215
Tanto Flores by Citadel
The Tanto made entirely by hand has a blade made DNH7-carbon steel (not stainless). This is traditionally cured with Lehmbeschichtung and thus has a real hamon line. The cutting edge has a hardness of 60 HRC, the back of the blade about 40 HRC.
The handle is complete with ray skin and wrapped in Japanese silk. The Menuki are made of bronze, in the form of a chrysanthemum.
The black lacquered scabbard holds degrees from buffalo horn.
Stick Gun Rosewood
by KWON
#803389
Stick Gun Rosewood by KWON
Rosewood (bright and untreated wood for training)
Budo belt plain
by Ju-Sports
#721455
Budo belt plain by Ju-Sports
Judo-, Karate-, Taekwondo-, Ju-Jutsu-, ..belt made of cotton. Specials: 4 cm wide
uniform belt
Case for Bo staffs
by Budoten
#551218
Case for Bo staffs by Budoten
Gun bag for up to 4 bars of Bo.
Small extra bag for a short weapon (such as a short sword) on the side of the bag. Small extra pocket on the opening.
With a long, adjustable handle. Strap with buckle.
The bag without contents will be delivered.
Samurai Training Sword
by Haller
#605288
Samurai Training Sword by Haller
Supplied with a tsuba and rubber ring for securing the Tsuba is included.
Made in China.
Katana practical Shirakawa bla ...
by Musashi
#651525
Katana practical Shirakawa black Saya by Musashi
Here you will find the Katana Dragon of Musashi, the blade of the sword was made of 1060 carbon steel differenziall tempered. The Hamon of the sword is authentic in a Midare Gunome pattern. The blade has a blood Groove and is very sharp.
Included: Katana, scabbard (Saya), cloth sword sheath and Musashi Musashi authenticity certificate. Blade: differential gehärteteter 1060 carbon steel Saya: the saya is made of wood with a high-gloss finish, the Koiguchi from Bull's horn. The Sageo is made of black cotton. Tsuka: The Tsuba is made of blackened steel with a dragon motif. The Nakago is secured by two smoked bamboo of Mekugis in the handle. The handle is covered with Stingray skin imitation. The sword can be used for cutting exercises.
asiatische+budowaffen katana shinken nihonto handgeschmiedet soshu kitae fudoshin japanische+schwerter schwert samurai samuraischwert samuraischwerter iaido iai+do iaito scharf
John Lee II - Katana Mount Fuj ...
by John Lee
#604644
John Lee II - Katana Mount Fuji by John Lee
Klinge 12-mal gefaltet
This sword comes with a certificate which guarantees the authenticity. It grinded sharp and comes in a coated fabric collector wooden box in which it can be kept surrounded by a fabric cover securely. The wooden handle is traditionally topped with real fish skin. The wooden scabbard is covered with high-gloss lacquer, the tsuba is made of brass and shows pictures of swordsmen and Chubu.
At the cutting edge, the sword has a hardness of 60 HRC and the back of the blade about 45 to 50 HRC. 2 Mekugi. Handle wrapped with cotton tape.
Multi-layer steel (folded blade) is also known as Damascus or Damascus blade, although European and Asian production methods differ slightly from one another. The fine pattern of the individual layers of the multi-folded steel give this product its special charm and are at the same time guarantees a long product life and high product quality.
This made according to museum originals masterpiece of Asian art of sword forging has been made in the traditional manner.
Made in China.
Baton / Kubotan Mini telescopi ...
#604882
Baton / Kubotan Mini telescopic baton
When closed, like a Kubotan usable open as baton used.
Manufactured in Taiwan.
Note: This article may be imported only with a special permit in Switzerland. Information, please contact the Canton Police Department.
Budogürtel with streaks cente ...
by Tornado
#551060
Budogürtel with streaks centered by Tornado
100% cotton.
The belt is on the front in two colors (with a stitched colored lines) - on the back of one color.
Budogürtel DAX einfarbig
by DAX
#751005
Budogürtel DAX einfarbig by DAX
Mehrfach abgesteppt, aus 100% Baumwolle.
Name embroidery Japanese for b ...
by Budoten
#591167
Name embroidery Japanese for belt / textiles by Budoten
Please keep in mind that European names usually rendered Latin alphabet or katakana with the.
Her name can be rendered in katakana. Please note, however, that an exact match is difficult to achieve because of a Japanese syllable system simplified in comparison. However, foreign words are transferred by the Japanese almost always in katakana. To transfer your name as exactly as possible, we need, if necessary, a phonetic transcription or the correct pronunciation of your name.
Quite a few customers want a Kanji translation of her name. Although this is possible, you should note that the transfer in Japanese according to the phonetic sound. The Japanese pronunciation of your name doing mostly a bit differs from your actual name. Each kanji has a meaning. Therefore, it may be that the Kanji used in your name do not make sense. In addition, it can be due to the nature of the Kanji that some kanji have a negative meaning in your name. We will try to avoid this, what will be but not always possible in some exceptional cases under all circumstances.
For this reason, we recommend the transfer in kanji for translations of names according to the meaning of the name. Here we ask however to note that it is identical to the reading of course not with the pronunciation of your name. Take, for example, the name of 'Judge'. Judges now once again in Japanese means 'Judge' such as in English, but "Hou-Kan". This would be a classic example of a proper transmission. Not all family name can be transferred. However, meanings, which can be translated into Japanese are behind the most given name.
The translation / transfer of names is of course only possible, if the translator mastered both languages. Almost Needless to say, this is true for our translators.
If you want a specific for you on your belt or your suit personally important sign, we assist. The article number, see quickly to the desired product "591163" or "Kanji embroidery individual" about our search. The higher price for this service has two reasons: on the one hand the correct kanji must be selected, and on the other hand we must also create an embroidery program for a professional embroidery.
Please keep in mind: the mindset of Asians is often very different to ours, and although it is possible to translate everything, we reserve the right, not to translate kanji or change of the Budoka to make matching them. The reason for this is that we support our customers with any stupid or even reverse last end kanji around want to run, which will most likely degrade the carrier, hurt the Japanese teachers or damage our reputation.
To get a preview of your personal kanji with the appropriate importance, on request. For the case that we want to change a Kanji desired by you, we will not implement of course this without your prior consent.
By default, the embroidery is done horizontally. Thereby, we can embroider by default up to 20 cm on each side of the belt. Surcharge longer embroideries that are "disappear then but mostly in the node". -An ugly effect.
Farbwahl
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
Sonder-Optionen
hier nur € 6.89
Bestickungs-Positionen
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
schon ab € 0.00
bestickungsservice stickservice individuelle bestickung embroidery schriftzeichen gürtel budoguertel individual gürtelbestickung guertelbestickung anzuege namensbestickung textbestickung textilbestickung namensbestickungen japanisch asiatisch kanji n
Japanese Kyudo Yumi Bow
by FujiMae
#351064
Japanese Kyudo Yumi Bow by FujiMae
Kyudo is the high art of Japanese archery, which is applied since the 16th century. Due to the slow motion sequences, traditional, stylish costumes and the beauty of the arrows and bows this sport is very nice to look at.
Iaito Ohane
by Fudoshin
#651299
Iaito Ohane by Fudoshin
mit schwarzer Tsuba
Particularities:
- Included in delivery are Iaito and sheath(saya)
- blade is made of aluminum alloy
total lengh: 100 cm
handle lengh: 27,5 cm
total weight laito: 820g
handle is coated with authentic ray skin
handle is traditionally wrapped with cotton thread
the blade is held in two bamboo handle Mekugis
the sword is blunt
Our Ohan Iaito is a perfect for both beginners and advanced students of Iaido. It is very easy and quick in learning the technique is helpful. The Ohan has a Bo-Hi and an aesthetically appealing etched hamon. The tsuba is steel. Ohan means: spring / light. The sword is designed for practical use in the normal Iaido training.
Bokken, 100 cm, red oak
by Budoten
#551183
Bokken, 100 cm, red oak by Budoten
Excellent for partner practice (Parry and fighting against Bokken Bokken) during normal training. Comes with Tsuba
Budo belts Junior
by DanRho
#102383
Budo belts Junior by DanRho
Start up belts, very popular-priced. Available colours: white, yellow, orange, green, blue.
uniform belt
Plastic sheath for Bokken
by WACOKU
#551384
Plastic sheath for Bokken by WACOKU
Plastiksaya for Japanese wooden training sword.
With black cotton tape for attachment to the hip.
Outer about 4.5 cm and about 3.5 cm wide. The inner dimension of the opening is about 3.2 cm and about 2.3 cm. The opening to the vagina narrows a little, so that the bokken remains tight.
Bokken with scabbard
by KWON
#804342
Bokken with scabbard by KWON
This Bokken is made of durable red oak and is suitable for contact and battle ready. The Saya is stable.
trainingsgerät trainingsgeraet trainingsgeraete kampfsport trainingsequipment asiatische+budowaffen divers safety bokken bokuto bokutou holzschwert trainingsschwert übungsschwert trainingsschwerter übungsschwerter uebungsschwerter
Club Line Soft Belts
by KWON
#804424
Club Line Soft Belts by KWON
Besonders weicher Gürtel
uniform belt
Ninja swords with sheath N730
by Jean Fuentes
#652116
Ninja swords with sheath N730 by Jean Fuentes
The Ninja were recorded as warriors organization who practiced espionage and guerrilla warfare for the first time in the 15th century. The Ninja were hired for jobs that have the Samurai, which were tied to the Bushido, not accepted. The Ninja has been specializing in espionage, murder and infiltration. These tasks had to the Ninja warriors have a cool head, the ability to adapt and be able to rely on his arms. It was the ingenuity of the Ninjas, the certain about survival.
- Blade: 440 stainless steel - a cut along the blade reduces the weight of the leaves, blows can be performed faster. The swords are easily sharpened.
- Handle: The handle is made of steel with a winding made of cotton
- Sheath: The sheath of the sword is made of black nylon with adjustable shoulder strap. Snap fuses secure the swords in the scabbard.
- Total length: 69 cm
- Blade length: 50 cm
- Length: 18 cm
. - Total weight of both swords including scabbard: 938 g
Includes: 2 swords and Saya.
Bow China
by FujiMae
#351058
Bow China by FujiMae
The bow is made of bamboo, the tensile force is approximately 16 - 17 kg draw length approx 145 cm / 350 gr.
asiatische+budowaffen kyudo yumi ya pfeile und bogen bogensport bogenschiessen sportbogen boegen bögen sportbögen
#601464
Bokken-Daito
The Tsuba is made of plastic and put on on the Bokken. So that it doesn't slip, it is fastened with a hold ring made of rubber at the Bokken. The Tsuba simply can therefore be removed. The Bokken can of course be used also without Tsuba.
White Lotus Bo with tapered en ...
by KWON
#804208
White Lotus Bo with tapered ends by KWON
Fashioned from lightweight lotus wood to provide a good grip. Suitable for demos and freestyle.
Youth belt with 2 cm wide colo ...
by DanRho
#10358
Youth belt with 2 cm wide color stripe by DanRho
color: yellow-orange, orange-green, white-yellow, white-orange, white-green, white-blue and white-brown.
uniform belt
Soft blue embroidery
by Ju-Sports
#721201
Soft blue embroidery by Ju-Sports
Extras:
blue with black handle
ideal for practicing defensive Stock
Protects all trainees
approximately 61 cm long, 228 g in weight
Ten Kei Katana
by John Lee
#605307
Ten Kei Katana by John Lee
-The sharply-carved blade of the sword (not stainless) is hand forged from 1095 carbon steel and was provided with a chamfer (Bo-Hi) to reduce weight
-Traditional, sophisticated hardening the blade with clay be stroke, creating a real, beautiful Hamon line
-Cut test suitable for - 60° Rockwell on the vagina, 40° on the back of the blade
-Rebuilt blade Kobus section (see figure)
-Fine, edited by hand fittings (Tsuba, Fuchi, Kashira, Menuki) which were plated with gold and silver
-Handle (Tsuka) made of wood, covered with real, fish skin (same)
-Tight handle wrap in green silk, traditionally in the Katate Maki - style (war winding) attached
-Blade clamp (Habaki) made of brass
-Sword Angel long held and fixed with 2 bamboo rods (Mekugi) in the handle
-Sheath made of wood, decorated with high-quality Sageo (winding)
-With certificate, which guarantees the authenticity
-Manufactured according to Museum template
-Delivery in wooden collectors box incl. stand
Dimensions and weights:
Tsuba (Nagasa) blade length: 71 cm
Total length: 100 cm
Total length with sheath: 104 cm
Handle length: 29 cm
Curvature (sori): 2 cm
Focus: approx. 11 cm above the Tsuba
Habaki blade width: 3.5 cm
Blade width at transition to the tip (Kisaki): 2.5 cm
Blade thickness: 0.75 cm
Scabbard weight: 1310 g
Weight without scabbard: 1045 g
Made in China.
Shinai - and Jo bag 135 cm
by Budoten
#551028
Shinai - and Jo bag 135 cm by Budoten
Nylontasche zur Aufbewahrung und Transport von z.B. Shinai, JO, Bokken etc., mit Kleinteilfach für Tsuba, Tanto etc.
incl. Schultertragegurt und Handgriffen zum bequemen Transport
Asymmetrical Kyudo bow bamboo
by FujiMae
#351057
Asymmetrical Kyudo bow bamboo by FujiMae
Kyudo is the high art of Japanese archery, which is applied since the 16th century. Due to the slow motion sequences, traditional, stylish costumes and the beauty of the arrows and bows this sport is very nice to look at.
asiatische+budowaffen kyudo yumi ya pfeile und bogen bogensport bogenschiessen sportbogen boegen bögen sportbögen
John Lee Kei Ben Iaito
by John Lee
#605310
John Lee Kei Ben Iaito by John Lee
The lai-do sports deals with the art of sword drawing and fixed attack techniques (kata), however as a formal exercise. This uses usually the Iaito, a blunt practice sword. The development of the unity of body, mind, and sword (Ki-Ken-Tai-ichi) is in the foreground. The highest degree of master unless you know any combat situation without having to pull the sword ever achieved. Kei-Ben stands for the simple and practical design of the sword. Masterpiece of Asian art of the silversmith.
The blade is made of stainless steel, hand-forged and hardened.
-The blade is dull and provided with a chamfer (Bo-Hi).
-The handle (Tsuka) is made of wood and with real blackened fish skin (same).
-The handle wrap (Tsuka-ITO) is traditionally made from cotton.
-The Tsuba cast zinc aluminium shows a floral motif.
-On the handle, two Menukis in the form of Mitsudomoe are inserted.
-The scabbard (Saya) is made of wood.
-The blade clamp (Habaki) is made of brass.
-With certificate and seal, which guarantees the authenticity
-Made after Museum templates
-Tsuba blade length 73.5 cm
-Total length without scabbard 101 cm
-Blade bending 19 mm
-Blade back width 5-6 mm
-Max blades width 30 mm
-Weight without scabbard 1100 g
-Weight with sheath 1350 g. Fuchi and Kashira are made of cast metal, the Menuki and the Shitodome are made of brass.
Made in China.
Double Judo Competition
by Trendy
#501381
Double Judo Competition by Trendy
The Double Judo Competition is the enrichment for your studio. You would like to make use of your rooms more individually and give your studio more attraction? The Double Judo Competition has no front- or backside, it can be used with both sides and has a rice strawdesigned surface. We deliver in the colour combination green/red or blue/red and a thickness of 4 cm. The teeth of the mats allow a tight joint of all the mats with each other. The mats can easily be joint together. Every surface you may imagine can be created individually and can be laid just loose on the floor.
Mizuno Belt Kuro IJF
by Mizuno
#751306
Mizuno Belt Kuro IJF by Mizuno
Made in Japan
The Mizuno belt is IJF certified and therefore allowed in international competitions.
The brand label on page 1 belt is gold and rubber. The IJF label on page 2 belt has been sewn from fabric.
Made in Japan.
Kung Fu Saber, flexible
by Ju-Sports
#721998
Kung Fu Saber, flexible by Ju-Sports
Sword forms running in the Tai Chi and Kung Fu with flexible, blunt metal blade and separate wooden scabbard.
Very beautiful to look at as a decoration.
Bo staff, high quality white o ...
by Budoten
#551366
Bo staff, high quality white oak by Budoten
This Bo stick is made of very good white oak. Deviations and tolerances of up to 2 mm are possible.
Dragon Wakizashi
by John Lee
#6010107
Dragon Wakizashi by John Lee
The tsuba of this remarkable sword formed a dragon surrounded the sword. The other ornamental rate show the mystical mythical creatures.
- Dull blade in shinogi-zukuri style with groove (Bo-Hi), hand forged from 1045 carbon steel
- Grip winding black cotton classic Hineri Maki style
- Black, high-gloss lacquered scabbard (Kuroro-style) of wood
- Supplied with protective cover in fabric and in an attractive collector's box
Tonfa Police
by Budoten
#551402
Tonfa Police by Budoten
Tonfa hard plastic for special units, price per Tonfa
Ninja sword with 2 Kunai N648
by Jean Fuentes
#652106
Ninja sword with 2 Kunai N648 by Jean Fuentes
Ninja sword with 2 Kunai
- Blade of 440 stainless steel
- Wrapped with nylon straps handle
- Nylon Leatherette Saya with adjustable shoulder strap
- Total length sword: 69 cm
- Weight sword: 440 g
- Total length Kunai: 12.5 cm
- Weight Kunai: 38 g
- Blade is blunt
Includes: Sword and Saya and two Kunai.
Bo, 182 cm, rattan
by Budoten
#551196
Bo, 182 cm, rattan by Budoten
Sanded smooth (without the outer shell).
Rattan is robust, in the fight against Stock Stock (as opposed to normal wood) it does not splinter, but frayed, what the risk of injury decreases.
