some of our products in this category

Embroidery with ready stick pr ...
by Budoten
from € 4.71
excl. VAT + shipping

#591173

add to shopping list item variants partly available.
Variants in backorder:
 591173 compare this item with ...

Embroidery with ready stick presentation by Budoten

Unlike a pressure which can be almost arbitrarily expanded or reduced, an embroidery template for each size of scratch-drafting (programmed). With each increase or decrease changes the number of stitches. The stitch density must be adjusted accordingly to create a high quality embroidery.

We want you to obtain maximum transparency about the expected cost of the embroidery. For this purpose, this calculation basis should help for the execution of embroidery done with the supplied or created exclusively Stick templates.

Isacord embroidery thread 40 A ...
by AMANN
from € 17.95
excl. VAT + shipping

#591188

add to shopping list item variants partly available.
Variants in backorder:
 591188 compare this item with ...

Isacord embroidery thread 40 Amann, 5000 m by AMANN

Budoten use the finest embroidery threads. With the ISACORD yarns of Amann / ACKERMANN we have finally found a embroidery thread that meets our high quality standards. ISACORD 40 is a 0.4 mm thick embroidery thread. The glossy surface structure gives the finished embroidery to life, because depending on the light, the colors change slightly. Light and shade are an important quality characteristic of a high quality embroidery.

ISACORD is the universal machine embroidery thread for a variety of applications. The bright, trilobal polyester yarn ensures strength reserves, as well as the highest abrasion resistance and excellent wet strength. The advantages for use in high-wear textiles (BESPO) and on the shoe-leather sector are thus obvious.

ISACORD 40 is colorfast in compliance with the care symbols and chlorine-resistant according to DIN 54035. Important for industries that work with intensive washing process, eg professional, hospital and catering wear. ISACORD is basically suitable for embroidery fashionable jeans, for example: be subjected stonewash and chlorine processes. Conventional viscose embroidery threads are not chlorineresistant in every way and there is the danger that the color bleeds out.

ISACORD 40 is also characterized by particularly high abrasion values. , Upholstered furniture, a quality feature for the practical value of machine embroidery, for example in the work, in sport and leather garments in fashion footwear and car seats. Embroidery with cheaper Rayon Machine covered by the known low rubs against it clearly, so that the joy vanishes at the high quality embroidery soon.

Environment: Oeko-Tex Standard 100 and 115 (Baby Product) are naturally
The selected yarns should no environmental or health harmful substances include (especially in Asia still a problem). Our products meet the Oeko-Tex Standard 100 and 115 (Baby Product). The selected yarns should no environmental or health harmful substances include (especially in Asia still a problem). Our products meet the Oeko-Tex Standard 100 and 115 (Baby Product). The Augsburg dyeing, in our yarns are made, is the most modern of its kind in Europe. It is specially designed according to the latest environmental standards.

stickereibedarf garne stickgarn stickgarne garn

KAI, Japan Needle Craft Scisso ...
only € 12.67
excl. VAT + shipping

#53475100

add to shopping list available ex central warehouse - ready for dispatch within 3-4 business days, quick service possible compare this item with ...

KAI, Japan Needle Craft Scissors, 100 mm (4)

The N5000 Series is made for professional use. The blades are made of AUS6A stainless steel (hardened up to 561 HRC) and have a thickness of 1.8 mm - 3.5 mm. The shears have a satin finished surface and a tension adjustable fastener made of brass for easy reconditioning.

stickereibedarf scheren nähschere stickschere weberschere schneiderschere

KAI Japan Dressmaking shears, ...
only € 19.61
excl. VAT + shipping

#53475210

add to shopping list available ex central warehouse - ready for dispatch within 3-4 business days, quick service possible compare this item with ...

KAI Japan Dressmaking shears, 210 mm (8)

The N5000 Series is made for professional use. The blades are made of AUS6A stainless steel (hardened up to 561 HRC) and have a thickness of 1.8 mm - 3.5 mm. The shears have a satin finished surface and a tension adjustable fastener made of brass for easy reconditioning.

KAI Japan Dressmaking shears ( ...
only € 21.79
excl. VAT + shipping

#53475211

add to shopping list available ex central warehouse - ready for dispatch within 3-4 business days, quick service possible compare this item with ...

KAI Japan Dressmaking shears (LEFT), 210 mm (8)

The N5000 Series is made for professional use. The blades are made of AUS6A stainless steel (hardened up to 561 HRC) and have a thickness of 1.8 mm - 3.5 mm. The shears have a satin finished surface and a tension adjustable fastener made of brass for easy reconditioning.

stickereibedarf scheren nähschere stickschere weberschere schneiderschere

Japan Professional Shears
by KAI
only € 107.50
excl. VAT + shipping

#53477240

add to shopping list available ex central warehouse - ready for dispatch within 3-4 business days, quick service possible compare this item with ...

Japan Professional Shears by KAI

High performance scissors with micro-teeth. Optimally for cutting aramid, Kevlar, carbon and glass fiber fabrics, 240 mm.

stickereibedarf scheren nähschere stickschere weberschere schneiderschere

KAI, Japan Professional Tailor ...
only € 83.79
excl. VAT + shipping

#53477250

add to shopping list available ex central warehouse - ready for dispatch within 3-4 business days, quick service possible compare this item with ...

KAI, Japan Professional Tailoring Shears, 250 mm (10)

The 7000 Series is the next generation of professional tailoring shears. The blades are made of AUS8A stainless steel (hardened up to 581 HRC) and have a thickness of 3.7 mm - 4 mm. The shears have a elegant matt finished anti-glare surface and the patented duplex interlock fastener which does not get loose easily. The screws are heat treated and hardened up to 451 HRC. The 7000 Series was honored with the IF Design Award 2005.

KAI, Japan Professional Tailor ...
only € 89.82
excl. VAT + shipping

#53477251

add to shopping list available ex central warehouse - ready for dispatch within 3-4 business days, quick service possible compare this item with ...

KAI, Japan Professional Tailoring Shears, 250 mm (10)

The 7000 Series is the next generation of professional tailoring shears. The blades are made of AUS8A stainless steel (hardened up to 581 HRC) and have a thickness of 3.7 mm - 4 mm. The shears have a elegant matt finished anti-glare surface and the patented duplex interlock fastener which does not get loose easily. The screws are heat treated and hardened up to 451 HRC. The 7000 Series was honored with the IF Design Award 2005.

stickereibedarf scheren nähschere stickschere weberschere schneiderschere

Japan Professional Tailoring S ...
by KAI
only € 101.67
excl. VAT + shipping

#53477280

add to shopping list available ex depot - ready for dispatch within 1-2 business days, quick service possible compare this item with ...

Japan Professional Tailoring Shears by KAI

The blades are made of AUS8A stainless steel (hardened up to 581 HRC) and have a thickness of 3.7 mm - 4 mm. The shears have a elegant matt finished anti-glare surface and the patented duplex interlock fastener which does not get loose easily. The screws are heat treated and hardened up to 451 HRC. The 7000 Series was honored with the IF Design Award 2005.

7280SE Professional Tailor Sci ...
by KAI
only € 107.50
excl. VAT + shipping

#53477281

add to shopping list available ex central warehouse - ready for dispatch within 3-4 business days, quick service possible compare this item with ...

7280SE Professional Tailor Scissors by KAI

The blades are made of AUS8A stainless steel (hardened up to 581 HRC) and have a thickness of 3.7 mm - 4 mm. The shears have a elegant matt finished anti-glare surface and the patented duplex interlock fastener which does not get loose easily. The screws are heat treated and hardened up to 451 HRC. The 7000 Series was honored with the IF Design Award 2005.

stickereibedarf scheren nähschere stickschere weberschere schneiderschere

ISAMET 40 metallic embroidery ...
by AMANN
from € 43.37
excl. VAT + shipping

#5910750

add to shopping list available ex central warehouse - ready for dispatch within 3-5 business days, quick service not available compare this item with ...

ISAMET 40 metallic embroidery thread AMANN, 5000 m by AMANN

Budoten uses exclusively high-quality embroidery. With the ISAMET yarns by Abdul / ACKERMANN, we have found a metallic embroidery thread, that will meet our high quality standards and can be combined with the normally used high-quality ISACORD 40. ISAMET is a metallised effect thread, which makes your embroidery especially noble.

Environment: Eco-Tex standard 100 and 115 (baby products) are of course
The yarns to be deployed should include no environmental or health-damaging substances (especially in Asia still a problem). Our products comply with the Ökotex standard 100 and 115 (baby items). The Augsburg dyeing, in which our yarns are produced, is the most advanced of its kind in Europe. It was designed according to the latest ecological standards.

stickereibedarf garne stickgarn stickgarne garn

Change in color of the finishe ...
by Budoten
from € 0.46
excl. VAT + shipping

#591174

add to shopping list item variants partly available.
Variants in backorder:
 591174 compare this item with ...

Change in color of the finished stick presentation by Budoten

Please understand, that we the extra investment bearing in mind calculate color changes.

stickereibedarf kalkulation bestickung option

Color change, charge for chang ...
by Budoten
from € 0.33
excl. VAT + shipping

#591177

add to shopping list item variants partly available.
Variants in backorder:
 591177 compare this item with ...

Color change, charge for changing the color stick by Budoten

Bobbin thread Black
by AMANN
from € 26.61
excl. VAT + shipping

#591187

add to shopping list available ex central warehouse - ready for dispatch within 3-5 business days, quick service not available compare this item with ...

Bobbin thread Black by AMANN

suitable for embroidery machines

ISAMET 40 metallic embroidery ...
by AMANN
from € 10.70
excl. VAT + shipping

#591191

add to shopping list available ex central warehouse - ready for dispatch within 3-5 business days, quick service not available compare this item with ...

ISAMET 40 metallic embroidery thread AMANN, 1000 m by AMANN

Budoten uses exclusively high-quality embroidery. With the ISAMET yarns by Abdul / ACKERMANN, we have found a metallic embroidery thread, that will meet our high quality standards and can be combined with the normally used high-quality ISACORD 40. ISAMET is a metallised effect thread, which makes your embroidery especially noble.

Environment: Eco-Tex standard 100 and 115 (baby products) are of course
The yarns to be deployed should include no environmental or health-damaging substances (especially in Asia still a problem). Our products comply with the Ökotex standard 100 and 115 (baby items). The Augsburg dyeing, in which our yarns are produced, is the most advanced of its kind in Europe. It was designed according to the latest ecological standards.

stickereibedarf garne stickgarn stickgarne garn

Awards and Certificates

  • martial arts secure shopping
  • security and reliance in Austria too