Roman centurion helmet with re ...
by Jean Fuentes
#651785
Roman centurion helmet with red crest CH6155 by Jean Fuentes
Roman centurion helmet. Made of steel and brass. The two cheek flaps can be folded upwards. It is portable.
portable centurion helmet
with red crest
Universal size
Material: steel sheet 1-2 mm thick
polished
Diameter: 21 cm
Cheeks protective hinged
Material: steel and brass
Weight: 2096 g
european+weapon helmets armour armory armoury rome roman
#602261
Helmet Stand
Rom und seine Waffen
Made in Spain.
Helmet stand
by Jean Fuentes
#651272
Helmet stand by Jean Fuentes
This helmet stand is designed to sit a helmet. He is by the dimensions universally applicable: Total height: 38 cm, diameter above 10 cm, bottom diameter about 19,5 cm. Already assembled.
#602262
Roman Officer Helmet
Rom und seine Waffen
This helmet is manufactured of steel. All details were carefully comprehended.
A copy, worked lovely that you should certainly include in your collection.
Delivery without helmet stand. However, the helmet stand can be ordered separately.
#602280
Mail Coif
In the beginning was the eternally young dream of mankind, the inviolability of the body. Especially, we are reminded when reading the old sagas, such as for example of the nibelungenlied. The young hero Siegfried bathed for the protection of the body in the blood of the Dragon, and obtained an inviolable cornea that protected him in the battle against injury, until on the LAN, which fell in the bath at his body.
Weapons and protective parts are as old as humanity itself. Designed for hunting for food procurement, as well as to defend against enemies. Each new development of weapons, the Flint hammer at the beginning of the weapons from bronze to the iron sword of the middle ages, brought also an evolution of protective clothing with it, found your accomplishment in the entire armor in the 15th and 16th centuries. The shield, which had a wooden substructure with a Reed -, fur - and leather upholstery in the development first, before it was then made of metal was one of the first parts of the protection undoubtedly. For the body, we already know the scale armour consisting of small metal plates which were tied together from the time from about 1500 BC. The first helmets were leather, in the subsequent period of bronze and later iron.
The chainmail (the breastplate) is known in approaches already from the ancient times and evolved over the Celtic and Germanic - Viking age as a particularly esteemed body protection, which often held a sword blow. The chain mail has the advantage that it adapts to the body over a normal chest armor. Thus, you could sit comfortably on the horse. Therefore, the Hauberk had side vents. About 20,000 rings were processed at a chain mail. It is judged that only wealthy fighter could afford such body protection. In the 12th and 13th centuries, the sleeves were longer and included gloves. The chainmail could provide no sufficient protection against crossbow bullets and beatings with lances. The chains shirts had no chance against the upcoming firearms. Making a chain shirt takes around 11 to 12 working days.
Manufactured in India.
#602282
Viking Helmet
mit Kettenansatz
The rings of the chain cover are galvanized.
Manufactured in India.
#602339
Wooden stand for helmet
Rom und seine Waffen
base about 31 x35 cm and total height of the shaft approximately 36 cm
Chain shirt with black rings
by Haller
#603167
Chain shirt with black rings by Haller
The chainmail (the armor) has already been known in approaches from ancient times and evolved over the Celtic, Germanic and Viking Age as a particularly esteemed body protection, a sword blow often withstood. The chain shirt has the advantage that it adapts to the body of a normal breastplate. So you could also sit comfortably on the horse. Therefore, the chain shirt had side slits. In a chainmail approximately 20,000 rings were processed. It can be seen that only wealthy could afford such a fighter body protection. In the 12th and 13th centuries, the sleeves were longer and also included gloves. Against crossbow projectiles and blows with lances the chain mail could not provide adequate protection. Even against the emerging firearms, the chain mail had no chance. The production of a chain mail takes about 11 to 12 working days.
The chain shirt with black rings are only available in a size about XL (dress size 56-58) corresponds.
Made in India.
Coif
by Haller
#603173
Coif by Haller
Undoubtedly one of the first protective parts belonged to the plate, the first in the development had a wooden substructure with a reed, fur or leather clothing, before it was made of metal.
For the body, we already know from the time of about 1500 years before Christ, the scale armor consisting of small metal plates that were tied together. The first helmets were made of leather, in the subsequent period of bronze and later iron.
The chainmail (the armor) has already been known in approaches from ancient times and evolved over the Celtic, Germanic and Viking Age as a particularly esteemed body protection, a sword blow often withstood.
The chain shirt has, compared to a normal breastplate, the advantage that it adapts to the body. In order to sit so comfortably on the horse, the chain shirt had side slits. Up to 20,000 rings were processed for chain mail. It can be seen that only wealthy could afford such a fighter body protection. In the 12th and 13th centuries, the sleeves were longer and also included gloves. Against crossbow projectiles and blows with lances the chain mail could not provide adequate protection. Even against the emerging firearms, the chain mail had no chance.
#603211
Roman legionary armor
Römische Rüstungen
From the time emperor Augustus (Lorica Segmenta). This body protection was the mostly common the Roman empire. The metal tires adapted to the body sufficiently and gave sufficient freedom of movement. These armors were another advantage that well and relatively smally had to be packed and the transportation didn't cause any difficulties with that.
#604398
Römischer Offiziershelm
Der Helm ist aus kräftigem, massivem und sehr festem Leder gearbeitet.
Hergestellt in Indien.
european+weapon helmets armour armory armoury rome roman
#604399
Wikingerhelm
Der Helm ist aus kräftigem, massivem und sehr festem Leder gearbeitet.
Hergestellt in Indien.
#605157
Roman battle shield Scutum
From the period from the middle of the 1st century. World should, to the extent the information is correct, only a relatively well-preserved shield be present. Our sign has a faithful handle on the rear plate. The wooden shield is framed against the action of the opponent's arms and also because of general wear with brass. The shield boss (umbo) is also made of brass. Attractive painted with motifs of the later Republican period. The Scutum was worn on the left arm. Of great importance was the Scutum in the Schilkrötenformation.
Made in India.
#651491
Roman clasp arms
Armor Lorica Segmentata the foot soldiers of the Roman legion. It is made of stainless steel. Fittings are made of brass. With adjustable straps. Universal size L / XL. Package Included: Four-piece armor with leather straps.
Roman Centurion Helmet
by Jean Fuentes
#651599
Roman Centurion Helmet by Jean Fuentes
Roman centurion helmet. Made of steel and brass. The two cheek flaps can be folded upwards. It is portable.
- Portable centurion helmet
- One size fits all
- Material: sheet steel 1-2 mm thick
- Polished
- Diameter: 21 cm
- Hinged cheek protection
- Material: steel and brass
- Weight: 2096 g
european+weapon helmets armour armory armoury rome roman
Corinthian helmet - Spartans, ...
by Jean Fuentes
#651996
Corinthian helmet - Spartans, Greeks, 300 by Jean Fuentes
Corinthian helmet - Spartans, Greeks, 300
This helmet is worn. A padded Covert hood is included in the delivery. So the helmet can be worn comfortably.
- Portable Corinthians helmet
- Universal size
- Incl. Padded covert cover (100% cotton)
- Material: sheet steel 1-2 mm thick
- Gold matt finish
- Total height: 33 cm
- Diameter: 21 cm
- Weight: 1994 g
Helmständer für Stahlhelme
by Jean Fuentes
#652233
Helmständer für Stahlhelme by Jean Fuentes
Der Helmständer in Form einer Stielhandgranate eignet sich bestens dafür, einen Stahlhelm zu präsentieren.
- Durchmesser Halterung oben: 9,5 cm
- Durchmesser Fuß unten: 20 cm
- Höhe: 37 cm
- Gewicht: 826 g
- einfachste Montage
Kein Helm in Lieferumfang enthalten!
