Budoten Ltd., Lindenweg 5, D-04910 Elsterwerda
phone +49 (0) 3533 519510 fax +49 (0) 3533 4890585
https://www.budoten.com e-mail info@budoten.com

Shop-Link: https://www.budoten.com/_cgi-bin/shop/shopen.pl?f=NR&c=605711

Yushu-Katana, Art.Nr. 605711





a product of Citadel

 

warranty: 24 month

withdrawal, return, exchange: 14 days

 

 

product details:

total length: 102,5 cm, blade length: 72,7 cm, handle length: 28,5 cm, weight without scabbard: 1050 g, total weight: 1380 g

Weight (without scabbard) 1050 g. Good swords there are many, perfection, however rare. Samurai swords made by Citadel among the best available to buy -next a real Nihonto- on the market. Perfection without "if" and "but" down to the smallest detail. Each sword is completely made by hand.
Each participating artisans is a master of his craft. The production of such a work of art takes up to three months and makes each piece unique.
Many samurai swords from mass production, only one strip Same (ray skin) is often glued to each page. In the Citadel complete handle is surrounded by the highest quality ray skin. The winding handle (Ito), made from the finest Japanese silk, is tight in Katate Maki - style attached. The strands of the nodes intersect it mutually. Underlaid is the winding (Tsuka Maki) of traditional, folded paper triangles, called Hishigami. The flat-shaped handle (Tsuka) was adjusted 100% to the Angel. A bamboo pen (Mekugi) holds handle and Angel together. As with the historical originals this is conical.
Butt end (Kashira) and grip ferrule (fuchi) are made of iron, covered with simple, but elegant, high-gloss black lacquer. Also iron is the tsuba, which was not cast, but made by hand. It shows a Japanese temple with Cherry blossom (Sakura no Hana) in the foreground. Ornamental rate (Menuki) with silver plated bronze offer a nice contrast to the dark winding handle (Tsuka-Maki) and underline the graceful picture.
Both the handle (Tsuka), as well as the vagina (Saya) Jakwood dried was used. In addition to the excellent strength properties, it is also because of its low acid fraction as starting material because it does not damage the blade. Was painted the vagina in glossy black, the so-called Kuroro style. Vaginal opening (Koiguchi), eye (kurigata) and vaginal degree (Kojiri) are made of water buffalo horn and were adapted in most elaborate handwork. The front part of the sheath (saya) is also surrounded by Roche skin. This was sanded and painted over later. The result is a smooth surface with a unique look. The scabbard (saya) is made individually for each blade individually and ensures absolute fit. With light pressure allows the blade detached from the vagina, but it certainly holds otherwise.
The blade is made of steel mono (1075er carbon steel, not stainless), but hardened differentiated. Under traditional Lehmbestrich this was differentiated to 60 HRC on the edge and about 40 HRC hardened at the back of the blade. Directly onto the blade, the blade collar (habaki) was forged silver-plated copper. Only in this way is possible the fuller play to the Tsuba and to guarantee a perfect fit. Through the skills of the polisher the masterful work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result.
As each sword is unique, dimensions and weight may vary. Delivery without sword stand

is mono steel (1075er carbon), but hardened differentiated:
Citadel Katana Yushu
The name Yushu (dt. "Perfection") carries this sword to right. The many intricate details make it a work of art of the highest class.
Butt end (Kashira) and grip ferrule (fuchi) are made of iron, covered with simple, but elegant, high-gloss black lacquer. Also iron is the tsuba, which is not cast, but made by hand. It shows a Japanese temple with Cherry blossom (Sakura no Hana) in the foreground. Ornamental rate (Menuki) with silver plated bronze offer a nice contrast to the dark winding handle (Tsuka-Maki) and underline the graceful picture.
- Sword in shinogi-zukuri style with groove (Bo-Hi).
- Situated Schmiedetes, the groove adapted Habaki silver-plated, engraved copper.
- Seppa silver-plated brass.
- Handle of black Japanese silk winding in Katate Maki style (war winding).
- Black, high-gloss lacquered scabbard with built-in ray skin (Same Kuroro style).
The razor sharp blades are made of 1075 carbon steel. Under traditional Lehmbestrich these are differentiated to approximately 60 HRC at the cutting edge and approximately 40 HRC hardened at the back of the blade. Through the skills of the polisher the masterful work of the blacksmith comes fully to bear. A mirror-polished surface, as well as a clearly recognizable temper line (hamon) are the result.
For each sword belongs next to a production certificate, a quality sword bag and a padded Cordura bag for transport.
Handle length 28.5 cm
Blade length 74 cm
Total length (without scabbard) 102.5 cm
Weight (without scabbard) 1050 g

Made in Cambodia.

weight: approx. 2 kg

Sold only to persons over 18 years!

 

price information
all pricesincl. 16% VAT plus shipping

€ 3147.21
 


Budoten Limited Martial Arts Supply

Address
Lindenweg 5
D-04910 Elsterwerda

phone +49 (0) 3533 519510
fax +49 (0) 3533 4890585

E-Mail info@budoten.com

Directors:
Ralph P. Görlach

Revenue Office
VAT-IDNo. DE246388978

Budoten Limited 69 Great Hampton Street
B18 6EW Birmingham, United Kingdom

registered in England and Wales:
Companies House of Cardiff No. 5660685
Trade Register Cottbus HRB 7542 CB

responsible for the contents (§ 10 III MDStV): Ralph P. Görlach

Info-Line: (+49) 03533/519510
You can reach our staff:
mo-fr 8-12 a.m. MET and mo-th 1-4 p.m. MET. Please note: We don't provide english phone support. Outside these times you can leave a message to our mailbox system or send an e-mail.